journal article·2023-03Open access

Analysis and Comparison of Two Different Sensing Techniques for In Situ Coating Thickness Measurements

Uroš Hudomalj, Ehsan Fallahi Sichani, Lukas Weiss, Majid Nabavi, Konrad Wegener

Journal of Thermal Spray Technology· Volume 32· Issue 2-3

Abstract

Abstract Coating thickness is considered to be one of the most important characteristics of thermally sprayed coatings. Therefore, it has long been the goal to be able to control it. This could be achieved by implementing an online, closed-loop control. A prerequisite for such a control mechanism is a feedback signal of the coating thickness with sufficiently small measurement uncertainty. Optical distance measurement techniques have been demonstrated in the past to produce promising results for such applications. This paper analyzes the measurement uncertainty of an optical distance measurement technique based on confocal distance sensors used for in situ coating thickness evaluation. As an alternative, pneumatically actuated length gauges are also used for the in situ measurement. Both techniques are applied during atmospheric plasma spraying of samples in a carousel setup. The two sensing techniques are compared with a reference, destructive coating thickness measurement method. Pros and cons of using different in situ coating thickness measurement techniques for process control applications are discussed.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Sensor Technologies Research · Surface Roughness and Optical Measurements · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (17)

Show source-provided references
1. D. Wroblewski, G. Reimann, M. Tuttle, D. Radgowski, M. Cannamela, S.N. Basu and M. Gevelber, Sensor Issues and Requirements for Developing Real-Time Control for Plasma Spray Deposition, J. Therm. Spray Technol., 2010, 19(4), p 723-735.10.1007/s11666-010-9490-3 ↗
2. G. Mauer, K.-H. Rauwald, R. Mücke and R. Vaßen, Monitoring and Improving the Reliability of Plasma Spray Processes, J. Therm. Spray Technol., 2017, 26(5), p 799-810.10.1007/s11666-017-0559-0 ↗
3. ISO 14923:2003, Thermal Spraying—Characterization and Testing of Thermally Sprayed Coatings, ISO, 2003
4. L. Yong, Z. Chen, Y. Mao and Q. Yong, Quantitative Evaluation of Thermal Barrier Coating Based on Eddy Current Technique, NDT E Int., 2012, 50, p 29-35.10.1016/j.ndteint.2012.04.006 ↗
5. Y. Ren, M. Pan, D. Chen and W. Tian, An Electromagnetic/Capacitive Composite Sensor for Testing of Thermal Barrier Coatings, Sensors, 2018, 18(5), p 1630.10.3390/s18051630 ↗
6. C. Bescond, S.E. Kruger, D. Lévesque, R.S. Lima and B.R. Marple, In-Situ Simultaneous Measurement of Thickness, Elastic Moduli and Density of Thermal Sprayed WC-Co Coatings by Laser-Ultrasonics, J. Therm. Spray Tech., 2007, 16(2), p 238-244.10.1007/s11666-007-9025-8 ↗
7. R. Shrestha and W. Kim, Evaluation of Coating Thickness by Thermal Wave Imaging: A Comparative Study of Pulsed and Lock-in Infrared Thermography—Part II: Experimental Investigation, Infrared Phys. Technol., 2018, 92, p 24-29.10.1016/j.infrared.2018.05.001 ↗
8. D. Ye, W. Wang, H. Zhou, J. Huang, W. Wu, H. Gong and Z. Li, In-Situ Evaluation of Porosity in Thermal Barrier Coatings Based on the Broadening of Terahertz Time-Domain Pulses: Simulation and Experimental Investigations, Opt. Express, 2019, 27(20), p 28150.10.1364/OE.27.028150 ↗
9. S. Kuroda, T. Fukushima and S. Kitahara, In Situ Measurement of Coating Thickness During Thermal Spraying Using an Optical Displacement Meter, J. Vac. Sci. Technol. A, 1987, 5(1), p 82-87.10.1116/1.574821 ↗
10. X. Ma and P. Ruggiero, Nondestructive Evaluation and Analyses of Thermal Spray Coatings: Latest Technology Progresses and Case Studies, ed. by F. Azarmi, K. Balani, T. Eden, T. Hussain, Y.C. Lau, L. Hua, K. Shinoda, F.-L. Toma, and J. Veilleux. Thermal Spray 2018: Proceedings from the International Thermal Spray Conference, May 7-10, 2018 (ASM International, Orlando, Florida, 2018), pp. 54-6110.31399/asm.cp.itsc2018p0054 ↗
11. A. Nadeau, L. Pouliot, F. Nadeau, J. Blain, S.A. Berube, C. Moreau and M. Lamontagne, A New Approach to Online Thickness Measurement of Thermal Spray Coatings, J. Therm. Spray Technol., 2006, 15(4), p 744-749.10.1361/105996306X147054 ↗
12. A. Nadeau, L. Pouliot, F. Nadeau, J. Blain, S.A. Berube, C. Moreau, and M. Lamontagne, Online Coating Thickness Monitoring: Conclusive Results from Early Industrial Implementations, ed. by B.R. Marple, M.M. Hyland, Y.C. Lau, C.-J. Li, R.S. Lima, and G. Montavon, Thermal Spray 2007: Global Coating Solutions, May 8-11, 2007 (Springer, Beijing, 2007), pp. 860-86610.31399/asm.cp.itsc2007p0860 ↗
13. N.D. Trail, M.W. Kudenov and E.L. Dereniak, In Situ Fringe Projector Development for Thermal Coating Deposition, Opt. Eng., 2014, 53(7), p 074105.10.1117/1.OE.53.7.074105 ↗
14. BIPM, IEC, IFCC, ILAC, ISO, IUPAC, IUPAP and OIML, Evaluation of Measurement Data — Guide to the Expression of Uncertainty in Measurement, JCGM 100:2008 (2008), http://www.bipm.org/utils/common/documents/jcgm/JCGM_100_2008_E.pdf
15. BIPM, IEC, IFCC, ILAC, ISO, IUPAC, IUPAP and OIML, Evaluation of Measurement Data—Supplement 1 to the ‘Guide to the Expression of Uncertainty in Measurement’—Propagation of Distributions Using a Monte Carlo Method, JCGM 101:2008 (2008), http://www.bipm.org/utils/common/documents/jcgm/JCGM_101_2008_E.pdf
16. ASTM E1920–03 (2014), Standard Guide for Metallographic Preparation of Thermal Sprayed Coatings (ASTM International West Conshohocken, PA, 2014), https://doi.org/10.1520/E1920-03R14.10.1520/E1920-03R14 ↗
17. ISO 1463:2021, Metallic and Oxide Coatings—Measurement of Coating Thickness—Microscopical Method, ISO, 2021