journal article·2008-12

Predicting Quenching and Cooling Stresses within HVOF Deposits

J. Stokes, L. Looney

Journal of Thermal Spray Technology· Volume 17· Issue 5-6
Publisher page

Abstract

Due to the nature of the HVOF and other thermal spray processes, residual stress build up in thick deposits is a significant and limiting problem since it impedes the coating behavior in service. The residual stress-state that evolves in a deposit is largely dependent on the thermal conditions to which the substrate/coating system has been subjected, and is a combination of quenching stresses, peening stresses that develop in some cases in HVOF, both of which arise during deposition, and cooling stresses, postdeposition. It follows that precise control of these phenomena is essential, if a thick deposit or one with low levels of residual stress are to be thermally sprayed. This paper applies looks at analytical and finite element techniques used to predict quenching and cooling stresses within tungsten carbide-cobalt thermally sprayed deposits. The analysis investigates and predicts the quenching and cooling stresses using improved analytical and finite element analysis techniques by validating the models with experimental results such as X-ray diffraction and the hole drilling method. The result of this paper is a thermo-mechanical equation for quenching stress which includes the effects of misfit strain, the Poisson’s effect, variation of coating and substrate thicknesses, thermal expansion, and process temperature effects.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · High-Temperature Coating Behaviors · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. J. Stokes, L. Looney, HVOF System Definition to Maximise the Thickness of Formed Components, Surf. Coat. Tech., Vol 148(1), 2001, pp. 18-2410.1016/S0257-8972(01)01272-5 ↗
2. J. Stokes, L. Looney, Residual Stress in HVOF Thermally Sprayed Thick Deposits, Surf Coat Tech, Vol 177-178, 2004, pp. 18-2310.1016/j.surfcoat.2003.06.003 ↗
3. J. Stokes and L. Looney, Properties of WC-Co Components Produced Using the HVOF Thermal Spray Process, Thermal Spray: Surface Engineering Via Applied Research, C.C. Berndt, Ed., 8-11 May 2000 (Montréal, Québec, Canada), ASM International, 2000, p 263-27110.31399/asm.cp.itsc2000p0263 ↗
4. J. Stokes and L. Looney, Finite Element Analysis of Residual Stress Generated by the HVOF Process, Building on 100 Years of Success, Proceedings of the 2006 International Thermal Spray Conference, B.R. Marple, M.H. Hyland, Y.C. Lau, R.S. Lima, and J. Voyer, Eds., May 15-18, 2006 (Seattle, WA, USA), ASM International, 2006, ISBN: 978-0-87170-836-6
5. J. Stokes and L. Looney, HVOF System Definition to Maximise the Thickness of Formed Components, International Conference on Advances in Materials and Processing Technology, M.S.J. Hashmi, Ed., 3-6 Aug 1999 (Dublin, Ireland), 1999, p 775-784
6. K.A. Khor, Y.W. Gu, Effects of Residual Stress on the Performance of Plasma Sprayed Functionally Graded ZrO2/NiCoCrAlY Coatings”, Mater Sci Eng, A277, 2000, pp. 64-7610.1016/S0921-5093(99)00565-1 ↗
7. X.C. Zhang, B.S. Xu, H.D. Wang, Y.X. Xu, Modelling of the Residual Stresses in Plasma-Spraying Functionally Graded ZrO2/NiCoCrAlY Coatings using Finite Element Method, Materials and Design, 2005, Vol 27(4), pp. 308-31510.1016/j.matdes.2004.10.026 ↗
8. H.D. Steffens and M. Gramlich, FEM-Analysis of Plasma Sprayed Thermal Barrier Coatings, Thermal Spray: International Advances in Coatings Technology, C.C. Berndt, Ed., May 25-June 5, 1992 (Orlando, FL), ASM International, 1992, p 531-536
9. J.K. Wright, J.R. Fincke, R.N. Wright, W.D. Swank, D.C. Haggard, Experimental and Finite Element Investigation of Residual Stress Resulting from the Thermal Spray Process, Advances in Thermal Spray Science & Technology, C.C. Berndt and S. Sampath, Ed., Sept 11-15, 1995 (Houston, TX), ASM International, 1995, p 187-192
10. H. Gruhn, W. Fischer, C. Funke, W. Mallener, and D. Stover, Residual Stress Calculation by Finite Element Methods, Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, Ed., Oct 7-11, 1996 (Cincinnati, OH), ASM International, 1996, p 869-87410.31399/asm.cp.itsc1996p0869 ↗
11. H. Gruhn, W. Malliner, and D. Stover, Modeling of Residual Stresses in Plasma Sprayed Multilayer Systems, Advances in Thermal Spray Science and Technology, C.C. Berndt and S. Sampath, Ed., Sept 11-15, 1995 (Houston, TX), ASM International, 1995, p 231-236
12. C.H. Hsueh, A.G. Evans, Residuals Stresses in Metal/Ceramic Bonded Strips, J. Am. Ceram. Soc. 68 1985, pp. 241-24810.1111/j.1151-2916.1985.tb15316.x ↗
13. S. Suresh, A.E. Giannkopoulos, M. Olsson, Elastoplastic Analysis of Thermal Cycling: Layered Materials with Sharp Interfaces, J. Mech. Phys. Solids, Vol 42, 1994, pp. 979-101810.1016/0022-5096(94)90081-7 ↗
14. B·S. Yilbas, A.F.M. Arif, Residual stress analysis for HVOF Diamalloy 1005 coating on Ti-6Al-4 V alloy, Surf & Coat Tech, Vol 202(3), 2007, pp. 559-56810.1016/j.surfcoat.2007.06.049 ↗
15. E.F. Rybicki, J.R. Shadley, Y. Xiong, D.J. Greving, A Cantilever Beam Method for Evaluation of Young’s Modulus and Poisson’s Ratio of Thermal Spray Coatings, J. Therm. Spray Tech., Vol 4(4), 1995, pp. 377-38310.1007/BF02648639 ↗
16. R.E. Whan, ASM Handbook Material Characterization, 9th Ed., Vol. 10, G.M. Crankovic, Ed., (Metals Park, OH), American Society for Metals, 1992. ISBN: 978-0-87170-016-2
17. L.L. Shaw, Thermal residual stresses in plates and coatings composed of multi-layered and functionally graded materials, Compos. B: Eng., Vol 29(3), 1998, pp. 199-21010.1016/S1359-8368(97)00029-2 ↗
18. L. Pawlowski, The Science and Engineering of Thermal Spray Coatings, John Wiley and Sons, Inc., London UK., (1995)
19. S. Kuroda, T.W. Clyne, The Quenching Stress in Thermally Sprayed Coatings, Thin Solid Films, Vol 200, 1991, pp. 273-28410.1016/0040-6090(91)90029-W ↗
20. S. Senderoff, A. Brenner, Calculation of Stress in Electrodeposits from the Curvature of a Plated Strip, Journal of Research, National Bureau of Standards, Vol 42 (2), (1949), pp. 105-12310.6028/jres.042.009 ↗
21. A.A. Tipton, The Effect of HVOF Sprayed Coatings on the Elevated Temperature High Cycle Fatigue Behaviour of a Martensitic Stainless Steel, Proceedings of the 8th National Thermal Spray Conference, C.C. Berndt and S. Sampath, Eds., 1995 (Houston, Texas), 1995, p 463-468
22. A. Itoh and T.W. Clyne, Initiation and Propagation of Interfacial Cracks During Spontaneous Debonding of Thermally sprayed coatings, Proceedings of the 8th National Thermal Spray Conference, C.C. Berndt and S. Sampath, Eds., 1995 (Texas, USA), 1995, p 425-432
23. G.G. Stoney, The Tension of Metallic Films Deposited by Electrolysis, Proc. Roy. Soc., Vol A82, 1909, pp. 172-17510.1098/rspa.1909.0021 ↗
24. R.O.E. Vijgen and J.H. Dautzenberg, Mechanical Measurement of the Residual Stress in thin PVD Films, Thin Solid Films, 1995, 270, p 264-26910.1016/0040-6090(95)06984-4 ↗
25. T.W. Clyne and S.C. Gill, Residual Stresses in Surface Coatings and Their Effects on Interfacial Debonding: A Review of Recent Work, J. Therm. Spray Tech., 1996, 5(4), p 401-41810.1007/BF02645271 ↗
26. Y.C. Tsui, T.W. Clyne, An Analytical Model for Predicting Residual Stresses in Progressively Deposited Coatings, Part 1: Planar Geometry, J. Thin Solid Films, 1997, Vol 306, pp. 23-3310.1016/S0040-6090(97)00199-5 ↗
27. T.W. Clyne, Residual Stresses in Surface Coatings and Their Effects on Interfacial Debonding, Key Eng. Mats., 1996, Vol 116-117, pp. 307-33010.4028/www.scientific.net/KEM.116-117.307 ↗
28. J.C. Tan, L. Looney and M.S.J. Hashmi, Residual Stress Analysis of WC-Co Solid Components Formed by the HVOF Thermal Spraying Process, Adv. Powder Metall. Partic. Mater., 1996, 3, p 9.41-9.52