Gas-Substrate Heat Exchange During Cold-Gas Dynamic Spraying
Source abstract
Abstract
Abstract In this study, the temperature distribution of the surfaces of several substrates under an impinging gas jet from a cold spray nozzle was determined. A low-pressure cold-gas dynamic spraying unit was used to generate a jet of hot compressed nitrogen that impinged upon flat substrates. Computer codes based on a finite differences method were used to solve a simplified 2-D temperature distribution equation for the substrate to produce non-dimensional relationships between the surface temperature and the radius of the impinging fluid jet, the substrate thickness, and the heating time. It was found that a single profile of the transient non-dimensional maximum surface temperature could be used to estimate the dimensional maximum surface temperature, regardless of the value of the compressed gas temperature. It was found further that as the thermal conductance of the substrate increased, the maximum surface temperature of the substrate beneath the gas jet decreased. The close agreement of the numerical results with the experimental results suggests that the non-dimensionalized results may be applied to a wide range of conditions and materials.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Fluid Dynamics and Heat Transfer · Particle Dynamics in Fluid Flows
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. A. Papyrin, V. Kosarev, K. Klinkov, A. Alkhimov, and V. Fomin, Cold Spray Technology, Elsevier, Oxford, UK, 2006
2. V. Champagne, The Cold Spray Materials Deposition Process: Fundamentals and Applications, Woodhead Publishing Limited, Cambridge, UK, 2007
3. R. Maev and V. Leshchinsky, Introduction to Low Pressure Gas Dynamic Spray: Physics and Technology, Wiley-VCH Verlag GmbH, Weinheim, 2008
4. E. Irissou, J.G. Legoux, A. Ryabinin, B. Jodoin, and C. Moreau, Review on Cold Spray Process and Technology: Part I—Intellectual Property, J. Therm. Spray Technol., 2008, 17, p 495-51610.1007/s11666-008-9203-3 ↗
5. P. King, G. Bae, H. Zahiri, M. Jahedi, and C. Lee, An Experimental and Finite Element Study of Cold Spray Copper Impact onto Two Aluminum Substrates, J. Therm. Spray Technol., 2010, 19, p 620-63410.1007/s11666-009-9454-7 ↗
6. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye, Bonding Mechanism in Cold Gas Spraying, Acta Mater., 2003, 51, p 4379-439410.1016/S1359-6454(03)00274-X ↗
7. M. Grujicic, C. Zhao, W. De-Rosset, and D. Helfritch, Adiabatic Shear Instability Based Mechanism for Particles/Substrate Bonding in the Cold-Gas Dynamic-Spray Process, Mater. Des., 2004, 25, p 681-68810.1016/j.matdes.2004.03.008 ↗
8. T. Schmidt, F. Gartner, H. Assadi, and H. Kreye, Development of a Generalized Parameter Window for Cold Spray Deposition, Acta Mater., 2006, 54, p 729-74210.1016/j.actamat.2005.10.005 ↗
9. T. Schmidt, H. Assadi, F. Gärtner, H. Richter, T. Stoltenhoff, H. Kreye, and T. Klassen, From Particle Acceleration to Impact and Bonding in Cold Spraying, J. Therm. Spray Technol., 2009, 18, p 794-80810.1007/s11666-009-9357-7 ↗
10. M. Fukumoto, H. Wada, K. Tanabe, M. Yamada, E. Yamaguchi, A. Niwa, M. Sugimoto, and M. Izawa, Effect of Substrate Temperature on Deposition Behavior of Copper Particles on Substrate Surfaces in the Cold Spray Process, J. Therm. Spray Technol., 2007, 16, p 643-65010.1007/s11666-007-9121-9 ↗
11. W. Wong, E. Irissou, A. Ryabinin, J.G. Legoux, and S. Yue, Influence of Helium and Nitrogen Gases on the Properties of Cold Gas Dynamic Sprayed Pure Titanium Coatings, J. Therm. Spray Technol., 2010, 20, p 213-22610.1007/s11666-010-9568-y ↗
12. J.G. Legoux, E. Irissou, and C. Moreau, Effect of Substrate Temperature on the Formation Mechanism of Cold-Sprayed Aluminum, Zinc, and Tin Coatings, J. Therm. Spray Technol., 2007, 16, p 619-62610.1007/s11666-007-9091-y ↗
13. D. Goldbaum, J.M. Shockley, R. Chromik, A. Rezaeian, S. Yue, J.G. Legoux, and E. Irrisou, The Effect of Deposition Conditions on Adhesion Strength of Ti and Ti6Al4V Cold Spray Splats, J. Therm. Spray Technol., 2012, 21, p 288-30310.1007/s11666-011-9720-3 ↗
14. M. Kulmala and P. Vuoristo, Influence of Process Conditions in Laser-Assisted Low-Pressure Cold Spraying, Surf. Coat. Technol., 2008, 202, p 4503-450810.1016/j.surfcoat.2008.04.034 ↗
15. Y. Danlos, S. Costil, X. Guo, H. Liao, and C. Coddet, Ablation Laser and Heating Laser Combined to Cold Spraying, Surf. Coat. Technol., 2010, 205, p 1055-105910.1016/j.surfcoat.2010.06.018 ↗
16. R. Lupoi, M. Sparkes, A. Cockburn, and W. O’Neill, High Speed Titanium Coatings by Supersonic Laser Deposition, Mater. Lett., 2011, 65, p 3205-320710.1016/j.matlet.2011.07.014 ↗
17. S. Rech, A. Trentin, S. Vezzù, J.G. Legoux, E. Irissou, and M. Guagliano, Influence of Pre-heated Al 6061 Substrate Temperature on the Residual Stresses of Multipass Al Coatings Deposited by Cold Spray, J. Therm. Spray Technol., 2010, 20, p 243-25110.1007/s11666-010-9596-7 ↗
18. P. King, S. Zahiri, and M. Jahedi, Microstructural Refinement Within a Cold-Sprayed Copper Particle, Metall. Mater. Trans. A, 2009, 40A, p 2115-212310.1007/s11661-009-9882-5 ↗
19. V. Kosarev, S. Klinkov, A. Alkhimov, and A. Papyrin, On Some Aspects of Gas Dynamics of the Cold Spray Process, J. Therm. Spray Technol., 2003, 12, p 265-28110.1361/105996303770348384 ↗
20. W. Li, S. Yin, X. Guo, H. Liao, X. Wang, and C. Coddet, An Investigation on Temperature Distribution Within the Substrate and Nozzle Wall in Cold Spraying by Numerical and Experimental Methods, J. Therm. Spray Technol., 2012, 21, p 41-4810.1007/s11666-011-9685-2 ↗
21. A. Ryabinin, E. Irissou, A. McDonald, and J.G. Legoux, Simulation of Gas-Substrate Heat Exchange During Cold Gas Dynamic Spraying, Int. J. Thermal Sci., 2012, 56, p 12-1810.1016/j.ijthermalsci.2012.01.007 ↗
22. D. Poulikakos, Conduction Heat Transfer, Prentice Hall, Englewood Cliffs, NJ, 1994