journal article·2016-06

On the Bonding Mechanism in Cold Spray of Deformable hex-BN-Ni Clusters

M. Neshastehriz, I. Smid, A. E. Segall, T. J. Eden

Publisher page

Abstract

Bond strength and the lubrication potential of coatings made of 7 µm Hexagonal Boron Nitride particles encapsulated with nickel (hBN-Ni), and deposited onto aluminum 6061 substrates via cold spray were examined; for all tests, N2 was used as the carrier gas at a temperature of 480 °C and pressure of 2.4 MPa. Results showed significant improvement in both wear resistance and reduced surface friction. Coated samples also demonstrated unexpected high bond strength, which was much greater than pure nickel cold sprayed onto aluminum. However, while the results were truly promising, the primary reason for the observed high bond strength could not be explained using existing cold spray theories which were primarily developed for pure metal particles. Based on the present findings compared to cold-sprayed layers of composite nickel-nickel (nickel particles encapsulated with nickel), a mechanism for bonding of hBN-Ni particles to aluminum based on the level of plastic deformation and hardenability is proposed. Indeed, the high bond strength between the coating and substrate is related to the relatively high initial ductility of the nickel encapsulation, compliance of the hBN, as well as the ensuing significant plastic deformation of the composite particles during cold spray deposition.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Flame retardant materials and properties · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. G. Bae, K. Kang, H. Na, J.J. Kim, and C. Lee, Effect of Particle Size on The Microstructure and Properties of Kinetic Sprayed Nickel Coatings, Surf. Coat. Technol., 2010, 204(20), p 3326-333510.1016/j.surfcoat.2010.03.046 ↗
2. A. Papyrin, V. Kosarev, S. Klinkov, A. Alkhimov, and V.M. Fomin, Cold Spray Technology, Elsevier, Amsterdam, 2006
3. I. Smid, A.E. Segall, P. Walia, G. Aggarwal, T.J. Eden, and J.K. Potter, Cold-Sprayed Ni-hBN Self-Lubricating Coatings, Tribol. Trans., 2012, 55(5), p 599-60510.1080/10402004.2012.686085 ↗
4. S. Yoon, J. Kim, G. Bae, B. Kim, and C. Lee, Formation of Coating and Tribological Behavior of Kinetic Sprayed Fe-Based Bulk Metallic Glass, J. Alloy. Compd., 2011, 509(2), p 347-35310.1016/j.jallcom.2010.09.024 ↗
5. S. Kumar, G. Bae, and C. Lee, Deposition Characteristics of Copper Particles on Roughened Substrates Through Kinetic Spraying, Appl. Surf. Sci., 2009, 255(6), p 3472-347910.1016/j.apsusc.2008.10.060 ↗
6. L.M. Stark, I. Smid, A.E. Segall, T.J. Eden, and J. Potter, Self-Lubricating Cold-Sprayed Coatings Utilizing Microscale Nickel-Encapsulated Hexagonal Boron Nitride, Tribol. Trans., 2012, 55(5), p 624-63010.1080/10402004.2012.686088 ↗
7. M. Neshastehriz, I. Smid, and A.E. Segall, In-Situ Agglomeration and De-agglomeration by Milling of Nano-Engineered Lubricant Particulate Composites for Cold Spray Deposition, J. Therm. Spray Technol., 2014, 3(7), p 1191-119810.1007/s11666-014-0122-1 ↗
8. M. Neshastehriz, Influence of Pre-Process Work Hardening of Nickel Encapsulated Hexagonal Boron Nitride Powders on Cold Spray Coatings, PhD Thesis, The Pennsylvania State University, 2014.
9. S. Marx, A. Paul, A. Köhler, and G. Hüttl, Cold Spraying: Innovative Layers for New Applications, J. Therm. Spray Technol., 2006, 15(2), p 177-18310.1361/105996306X107977 ↗
10. F. Raletz, G. Ezo’o, M. Vardelle, and M. Ducos, Characterization of Cold-Sprayed Nickel-Base Coatings. ITSC 2004: International Thermal Spray Conference 2004: Advances in Technology and Application, 2004, pp. 323-328.10.31399/asm.cp.itsc2004p0323 ↗
11. ASTM G133-05, Standard Test Method for Linearly Reciprocating Ball-on-Flat Sliding Wear, 2010, West Conshohocken, PA.
12. ASTM C633-13, Standard Test Method for Adhesion or Cohesion Strength of Thermal Spray Coatings, 2013, West Conshohocken, PA.
13. V.K. Champagne, Jr., D. Helfritch, P. Leyman, S. Grendahl, and B. Klotz, Interface Material Mixing Formed by the Deposition of Copper on Aluminum by Means of the Cold Spray Process, J. Therm. Spray Technol., 2005, 14(3), p 330-33410.1361/105996305X59332 ↗
14. A.K. Singh, Advanced X-Ray Techniques in Research and Industry, IOS Press, Amsterdam, 2005