journal article·2008-06Open access

Development and the Implementation of High-Temperature Reliable Heaters in Plasma Spray Technology

Maria Prudenziati

Abstract

Many problems have been encountered during development of reliable high-temperature heaters by means of atmospheric plasma spray and procedures commonly adopted in thermal spray technology, especially due to poor steel substrate corrosion resistance, notably affected by grit-blasting operations, but also deriving from contamination of insulating layers, dielectric arcs, and failures due to hot spots in the heating elements. While seeking the origin of these problems, a close scrutiny of every single step of the preparation process and analyses of the coatings were carried out using laser confocal scanning microscopy, optical and electronic microscopy, fluorescence analysis, X-ray diffraction, and ancillary techniques. The electrical properties of both alumina layers and metal strips prepared with Ni, NiCr, NiAl commercial powders for the heating elements were studied and cross-related to the failures in the heaters. The article reports the main results of these investigations, delineates the innovations introduced to overcome or circumvent the problems, and underlines the distinct characteristics of new heaters, whose reliability has been proven up to now with temperatures of up to 600 °C in air.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M. Fasching, F. B. Prinz, L.E. Weiss, Smart coatings: a technical note, J. Therm. Spray Technol., 1995, 4(2) p.133–13610.1007/BF02646101 ↗
2. S. Sampath, H. Herman, A. Patel, R. Gambino, R. Greenlaw, and E. Tormey, Thermal Spray Techniques for Fabrication of Meso-electronics and Sensors, Mater. Res. Soc. Proc., 2001, 624 (Materials Development for Direct Write Technologies), p 181-18810.1557/PROC-624-181 ↗
3. E. Brook-Levinson, V. Manov, E. Margolin, E. Adar, Y. Sorkine, and V. Volchkov, Electrical Heating Elements and Method for Producing Same, US Patent 6,596,960, July 22, 2003
4. E. Hyllberg Bruce, Ceramic Heater Roller, US Patent 5,616,263, April 1, 1997
5. H.F. Younis, R.S. Dahbura, and J.H. Lienhard V, Thin Film Resistance Heaters for High Heat Flux Jet-array Cooling Experiments, Proc. ASME Heat Transfer Div., ASME HTD, 1997, 353, p 127-13410.1115/IMECE1997-0901 ↗
6. D. Michels, J. Hadeler, J. H. Lienhard V, High Heat Flux Resistance Heaters from VPS and HVOF Thermal Spraying, Exptl. Heat Transfer , 1998, 11(4) pp.341–35910.1080/08916159808946570 ↗
7. R. Gadow, A. Killinger, C. Li, Product development with thermally sprayed functional coatings on glass and glass-ceramics substrates, Intl. J. Appl. Ceram. Technol., 2005, 2(6) pp.493–50310.1111/j.1744-7402.2005.02050.x ↗
8. G. Cirri and M. Prudenziati, Method for Producing Heated Components for Injection Moulding Apparatus and Heating Equipment in General, US 2005/0257367 A1, November 24, 2005
9. M. Prudenziati, G. Cirri, P. Dal Bo, Novel high-temperature reliable heaters in plasma spray technology, J. Therm. Spray Technol., 2006, 15(3), pp.329–33110.1361/105996306X124293 ↗
10. G. Cirri and M. Prudenziati, Elemento riscaldante innovativo, in particolare per camere calde di apparecchiature di stampaggio ad iniezione di materie plastiche, Italian Patent Pending MO2006A000314
11. G. Cirri and M. Prudenziati, Tecnica innovativa per il miglioramento delle caratteristiche dielettriche e di anticorrosione di ricoprimenti ottenuti con tecnologie thermal spray, APS, HVOF e analoghe, in particolare di riporti isolanti quali ad es. Al2O3, Italian Patent Pending MO2006A000322
12. ASTM D 3755 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials Under Direct-Voltage Stress
13. L. Golonka, L. Pawłowski, Ceramic on metal substrates produced by plasma spraying for thick film technology, Electrocomp. Sci. Technol., 1983, 10(2–3) pp.143–15010.1155/APEC.10.143 ↗
14. R. McPherson, Surface Engineering Processes and Applications, K.N. Strafford, R.St.C. Smart, I. Sare, and C. Subramanian, Eds. (Lancaster), Technomic Publications, 1995, p 3-20
15. ASTM B 117-73 Standard Test Method of Salt Spray (FOG) Testing and ASTM B 117-90 Standard Test Method of Salt Spray (FOG) Testing
16. ASTM D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials and Volume and Surface Resistivity Measurements of Insulating Materials Using the Model 6517A Electrometer/High Resistance Meter. Application Note Keithley, Series Number 314
17. M. Mellali, A. Grimaud, A. C. Leger, P. Fuchais, J. Lu, Alumina grit blasting parameters for surface preparation in the plasma spraying operation, J. Therm. Spray Technol. , 1997, 6(2) pp. 217–22710.1007/s11666-997-0016-6 ↗
18. L. Pawłowski, The relationship between structure and dielectric properties in plasma-sprayed alumina coatings, Surf. Coat. Technol. 1988, 35 (3–4) pp.285–29810.1016/0257-8972(88)90042-4 ↗
19. R. Yamasaki and J. Takeuchi, Physical characteristics of alumina coating using atmospheric plasma spraying (APS) and low pressure plasma spraying (VPS), in Proc. ISTC Spray 2004:Advances in Technology and Application, Osaka, Japan, DVS Verlag, 2004, B. R. Marple, C. Moreau Eds., pp. 283–285
20. K. Sohlberg, S. J. Pennycook, S. T. Pantelides, Hydrogen and the structure of transition aluminas, J. Am. Chem. Soc., 1999, 121(33) 7493–749910.1021/ja991098o ↗
21. H. J. Kim, S. Odoul, C. H. Lee, Y. G. Kweon, The electrical insulation behavior and sealing effects of plasma-sprayed alumina-titania coatings” Surf. Coat. Technol. 2001, 140(3) pp.293–30110.1016/S0257-8972(01)01044-1 ↗
22. E. Turunen, T. Varis, S. -P. Hannula,1, A. Vaidya, A. Kulkarni, J. Gutleber, S. Sampath, H. Herman, On the role of particle state and deposition procedure on mechanical, tribological and dielectric response of high velocity oxy-fuel sprayed alumina coatings, Mat. Sci. Eng. A., 2006, A415(1–2) pp.1–1110.1016/j.msea.2005.08.226 ↗
23. E. J. Young, E. Mateeva, J. J. Moore, B. Mishra, M. Loch, Low pressure plasma spray coatings, Thin Solid Films, 2000, 377–378, pp.788–79210.1016/S0040-6090(00)01452-8 ↗
24. K. Volenik, B.Kolman, J.Dubsky and P.Chraska, In-flight behaviour of Ni-Al powder during its plasma spraying, Proceedings of the ITSC 2005- Thermal Spay connects: Explore its surfacing potential!, E. Lugscheider Ed., Pub. DVS-Verlag GmbH, 40223 Duesseldorf, Germany, 2005, pp.1175–1178
25. G. Espie, A. Denoirjean, P. Fauchais, J. C. Labbe, J. Dubsky, O. Schneeweiss, K. Volenik, In-flight oxidation of iron particles sprayed using gas and water stabilized plasma torch, Surf. Coat. Technol. 2005, 195(1) pp.17–2810.1016/j.surfcoat.2004.05.030 ↗
26. P.Chraska , B.Kolman, M.Suchanek, K.Volenik, Composition changes of selected alloys during their plasma spraying. In Proc.ITSC 2004: Thermal Spray Solutions-Advances in technology and applications in Proc. ISTC Spray 2004:Advances in Technology and Application, Osaka, Japan, DVS Verlag, 2004, B. R. Marple, C. Moreau Eds., pp. 7–11
27. R. C. Weast (Ed). Handbook of Chemistry and Physics, 50 Edition, The Chemical Rubber Company CL. Ohio, 1969
28. Hui. Liu, E. Y. Jiang, R. K. Zheng, H.L. Bai, Structure and transport properties of polycrystalline Fe3O4 films, J. Phys. C. : Cond. Matter, 2003, 15 (46) 8003–800910.1088/0953-8984/15/46/016 ↗
29. E. J. Verwey, P. W. Haayman, F. C. Romeijn, Physical properties and cation arrangement of oxides with spinel structures, II. Electronic conductivity, J. Chem. Phys. 1947, 15 (4) pp.181–18710.1063/1.1746466 ↗
30. R Gadow, A. Killinger, C. Li, On line process control of plasma sprayed ceramic coatings with IR thermographic imaging, in Proc. ITSC 2002,E. Lugscheider ed. Pub. DVS-Deutscher Verband für Schweißen, Dusseldorf, Germany, 2002, pp. 573–579
31. D. Briand , F. Beaudoin, J. Courbat , N.F. de Rooij, R. Desplats, and P. Perdu, Microelec. Reliab. 2005, 45(9-11), p 1786-178910.1016/j.microrel.2005.07.106 ↗
32. T. Tong, J. Li, Q. Chena, J. P. Longtin, S. Tankiewicz, S. Sampath, Ultrafast laser micromachining of thermal sprayed coatings for microheaters: design, fabrication and characterization, Sens. Actuators, A., 2004, A114(1), pp.102–11110.1016/j.sna.2004.02.012 ↗
33. E.M. Gualtieri and M. Prudenziati, Sistema per la rivelazione di composti organici tossici pesanti in aria, Italian Patent Pending MO2006A000151
34. G. Cirri and M. Prudenziati, Metodi innovativi per la produzione di piani di cottura in ceramica o in vetro con riscaldatore integrato, per cucine domestiche ed autoregolato in temperatura, Italian Patent Pending MO2006A000413