journal article·2008-03

Suspension Plasma Spraying of YPSZ Coatings: Suspension Atomization and Injection

Régine Rampon, Claudine Filiatre, Ghislaine Bertrand

Publisher page

Abstract

Among processes evaluated to produce some parts of or the whole solid-oxide fuel cell, Suspension Plasma Spraying (SPS) is of prime interest. Aqueous suspensions of yttria partially stabilized zirconia atomized into a spray by an internal-mixing co-axial twin-fluid atomizer were injected into a DC plasma jet. The dispersion and stability of the suspensions were enhanced by adjusting the amount of dispersant (ammonium salt of polyacrylic acid, PAA). A polyvinyl alcohol (PVA) was further added to the suspension to tailor its viscosity. The PVA also improved the dispersion and stability of the suspensions. The atomization of optimized formulations is described implementing Weber and Ohnesorge dimensionless numbers as well as gas-to-liquid mass ratio (ALR) value. Drop size distributions changed from monomodal distributions at low We to multimodal distributions when We number increases. The viscosity of the suspensions has a clear influence on the drop size distribution and suspension spray pattern. The secondary fragmentation of the drops due to the plasma jet was evidenced and the final size of the sheared drops was shown to depend on the characteristics of the suspension. Rather dense zirconia coatings have been prepared, which is a promising way to produce electrolyte.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Solid Oxide Fuel Cells · Fuel Cells and Related Materials · Electronic and Structural Properties of Oxides

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A.R. Nicoll, A. Salito, K. Honegger, Potential of Plasma Spraying for the Deposition of Coatings on SOFC Components, Solid State Ionics, 1992, 52(1-3), 269–27510.1016/0167-2738(92)90115-6 ↗
2. T. Yoshida, The Future of Thermal Plasma Processing for Coating, Pure Appl. Chem., 1994, 66 (6), 1223–123010.1351/pac199466061223 ↗
3. A. Notomi, N. Hisatome, Application of Plasma Spraying to Solid Oxide Fuel Cell Production, Pure Appl. Chem., 1996, 68(5), 1101–110610.1351/pac199668051101 ↗
4. R. Henne, G. Schiller, V. Borck, M. Mueller, M. Lang, and R. Ruckdaschel, SOFC Components Production—An Interesting Challenge for DC- and RF-Plasma Spraying, Proceedings of the 15th International Thermal Spray Conference: Thermal Spray Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, USA, 1998, p 933-93810.31399/asm.cp.itsc1998p0933 ↗
5. H.C. Chen, J. Heberlein, and T. Yoshida, Preparation of Films for Solid Oxide Fuel Cells by Center-Injection Low Pressure Plasma Spraying, Proceedings of the 15th International Thermal Spray Conference: Thermal Spray Meeting the Challenges of the 21st Century, C. Coddet, Ed., ASM International, Materials Park, OH, USA, 1998, p 1309-131410.31399/asm.cp.itsc1998p1309 ↗
6. F. Gitzhofer, M. Boulos, J. Heberlein, R. Henne, T. Ishigaki, and T. Yoshida, Integrated Fabrication Processes for Solid-Oxide Fuel Cells Using Thermal Plasma Spray Technology, MRS Bull., 2000, 25(7), p 38-4210.1557/mrs2000.122 ↗
7. J. Will, A. Mitterdorfer, C. Kleinlogel, D. Perednis, L.J. Gauckler, Fabrication of Thin Electrolytes for Second-Generation Solid Oxide Fuel Cells, Solid State Ionics, 2000, 131, 79–9610.1016/S0167-2738(00)00624-X ↗
8. O. Yamamoto, Solid Oxide Fuel Cells: Fundamental Aspects and Prospects, Electrochim. Acta, 2000, 45, 2423–243510.1016/S0013-4686(00)00330-3 ↗
9. A. Weber, E. Ivers-Tiffée, Materials and Concepts for Solid Oxide Fuel Cells (SOFCs) in Stationary and Mobile Applications, J. Power Sources, 2004, 127, 273–28310.1016/j.jpowsour.2003.09.024 ↗
10. L.R. Pederson, P. Singh, X.-D. Zhou, Application of Vacuum Deposition Methods to Solid Oxide Fuel Cells, Vacuum, 2006, 80, 1066–108310.1016/j.vacuum.2006.01.072 ↗
11. G. Schiller, R.H. Henne, M. Lang, R. Ruckdäschel, and S. Schaper, Development of Vacuum Plasma Sprayed Thin-Film SOFC for Reduced Operating Temperature, Fuel Cells Bull., 2000, 3(21), p 7-1210.1016/S1464-2859(00)88860-4 ↗
12. M. Lang, R. Henne, S. Schaper, G. Schiller, Development and Characterization of Vacuum Plasma Sprayed Thin Film Solid Oxide Fuel Cells, J. Therm. Spray Tech., 2001, 10 (4), 618–62510.1361/105996301770349141 ↗
13. M. Lang, R. Henne, S.E. Pohl, G. Schiller, and E. Hubig, Vacuum Plasma Spraying of Thin-Film Planar Solid Oxide Fuel Cells (SOFC)—Development and Investigation of the YSZ Electrolyte Layer, Proceedings of the International Thermal Spray Conference, E. Lugscheider, Ed., Verlag, Dusseldorf, Germany, 2002, p 807-81210.31399/asm.cp.itsc2002p0807 ↗
14. X.Q. Ma, F. Borit, V. Guipont, and M. Jeandin, Vacuum Plasma Sprayed YSZ Electrolyte for Solid Oxide Fuel Cell Application, Proceedings of the International Thermal Spray Conference, E. Lugscheider, Ed., Verlag, Dusseldorf, Germany, 2002, p 116-12110.31399/asm.cp.itsc2002p0116 ↗
15. J. Van Herle, A.J. McEvoy, K.R. Thampi, Conductivity Measurements of Various Yttria-Stabilized Samples, J. Mater. Sci., 1994, 29, p 3691–370110.1007/BF00357336 ↗
16. K. Okumura, Y. Aihara, S. Ito, S. Kawasaki, Development of Thermal Spraying-Sintering Technology for Solid Oxide Fuel Cells, J. Therm. Spray Tech., 2000, 9 (3), 354–35910.1361/105996300770349791 ↗
17. K.A. Khor, L.-G. Yu, S.H. Chan, X.J. Chen, Densification of Plasma Sprayed YSZ Electrolytes by Spark Plasma Sintering (SPS), J. Eur. Ceram. Soc., 2003, 23, 1855–186310.1016/S0955-2219(02)00421-1 ↗
18. K.A. Khor, X.J. Chen, S.H. Chan, L.-G. Yu, Microstructure-Property Modifications in Plasma Sprayed 20 wt.% Yttria Stabilized Zirconia Electrolyte by Spark Plasma Sintering (SPS) Technique, Mater. Sci. Eng. A, 2004, 366, 120–12610.1016/j.msea.2003.08.119 ↗
19. D. Stöver, D. Hathiramani, R. Vassen, R.J. Damani, Plasma-Sprayed Components for SOFC Applications, Surf. Coat. Technol., 2006, 201, 2002–200510.1016/j.surfcoat.2006.04.039 ↗
20. J. Karthikeyan, C.C. Berndt, J. Tikkanen, J.Y. Wang, A.H. King, H. Herman, Preparation of Nanophase Materials by Thermal Spray Processing of Liquid Precursors, NanoStruct. Mater., 1997, 9, 137–14010.1016/S0965-9773(97)00037-8 ↗
21. J. Karthikeyan, C.C. Berndt, J. Tikkanen, S. Reddy, H. Herman, Plasma Spray Synthesis of Nanomaterial Powders and Deposits, Mater. Sci. Eng. A, 1997, 238, 275–28610.1016/S0921-5093(96)10568-2 ↗
22. J. Karthikeyan, C.C. Berndt, S. Reddy, J.Y. Wang, A.H. King, H. Herman, Nanomaterial Deposits Formed by DC Plasma Spraying of Liquid Feedstocks, J. Am. Ceram. Soc., 1998, 81(1), 121–12810.1111/j.1151-2916.1998.tb02303.x ↗
23. N.P. Padture, K.W. Schlichting, T. Bhatia, A. Ozturk, B. Cetegen, E.H. Jordan, M. Gell, S. Jiang, T.D. Xiao, P.R. Strutt, E. Garcia, P. Miranzo, M.I. Osendi, Towards Durable Thermal Barrier Coatings with Novel Microstructures Deposited by Solution-Precursor Plasma Spray, Acta Mater., 2001, 49, 2251–225710.1016/S1359-6454(01)00130-6 ↗
24. L. Xie, X. Ma, E.H. Jordan, N.P. Padture, D.T. Xiao, M. Gell, Identification of Coating Deposition Mechanisms in the Solution-Precursor Plasma-Spray Process Using Model Spray Experiments, Mater. Sci. Eng. A, 2003, 362, 204–21210.1016/S0921-5093(03)00617-8 ↗
25. L. Xie, X. Ma, A. Ozturk, E.H. Jordan, N.P. Padture, B.M. Cetegen, D.T. Xiao, M. Gell, Processing Parameter Effects on Solution Precursor Plasma Spray Process Spray Patterns, Surf. Coat. Technol., 2004, 183, 51–6110.1016/j.surfcoat.2003.09.071 ↗
26. X.Z. Guo, B.G. Ravi, P.S. Devi, J.C. Hanson, J. Margolies, R.J. Gambino, J.B. Parise, S. Sampath, Synthesis of YTTRUIUM GARNET (YIG) by Citrate-Nitrate Gel Combustion and Precursor Plasma Spray Processes, J. Magn. Magn. Mater., 2005, 295, 145–15410.1016/j.jmmm.2005.01.007 ↗
27. F. Gitzhofer, E. Bouyer, and M.I. Boulos, Suspension Plasma Spray Deposition, U.S. Patent 5 609 921, Mar. 11, 1997
28. M. Bonneau, F. Gitzhofer, and M. Boulos, SOFC/CeO2 Doped Electrolyte Deposition, Using Suspension Plasma Spraying, Proceedings of the International Thermal Spray Conference Thermal Spray 2000: Surface Engineering via Applied Research, C.C. Berndt, Ed., ASM International, Materials Park, OH, USA, 2000, p 929-93410.31399/asm.cp.itsc2000p0929 ↗
29. P. Fauchais, M. Vardelle, J.F. Coudert, A. Vardelle, C. Delbos, J. Fazilleau, Thermal Plasma Deposition from Thick to Thin Coatings and from Micro- to Nanostructure, Pure Appl. Chem., 2005, 77(2), 475–48510.1351/pac200577020475 ↗
30. P. Fauchais, V. Rat, C. Delbos, J.F. Coudert, T. Chartier, L. Bianchi, Understanding of Suspension DC Plasma Spraying of Finely Structured Coatings for SOFC, IEEE Trans. Plasma Sci., 2005, 33(2) 920–93010.1109/TPS.2005.845094 ↗
31. P. Blazdell, S. Kuroda, Plasma Spraying of Submicron Ceramic Suspensions Using a Continuous Ink Jet Printer, Surf. Coat. Technol., 2000, 123, 239–24610.1016/S0257-8972(99)00440-5 ↗
32. R. Siegert, J.-E. Döring, J.-L. Marqués, R. Vaßen, D. Sebold, and D. Stöver, Denser Ceramic Coatings Obtained by the Optimization of the Suspension Plasma Spraying Technique, Proceedings of the International Thermal Spray Conference 2004: Thermal Spray Solutions Advances in Technology and Applications, ASM International, Materials Park, OH, USA, 2004, p 568-57310.31399/asm.cp.itsc2004p0568 ↗
33. J. Oberste Berghaus, S. Bouaricha, J.G. Legoux, and C. Moreau, Injection Conditions and In-Flight Particle States in Suspension Plasma Spraying of Alumina and Zirconia Nano-Ceramics, Proceedings of the International Thermal Spray Conference 2005: Thermal Spray connects: Explore its surfacing potential!, E. Lugscheider, Ed., Verlag, Dusseldorf, Germany, 200510.31399/asm.cp.itsc2005p0512 ↗
34. X.Q. Ma, J. Roth, T.D. Xiao, and M.Gell, Study of Unique Microstructure in SPS Ceramic NanoCoating, Proceedings of the International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, C. Moreau and B. Marple, Eds., ASM International, Materials Park, OH, USA, 2003, p 1471-147610.31399/asm.cp.itsc2003p1471 ↗
35. C. Delbos, J. Fazilleau, J.F. Coudert, P. Fauchais, L. Bianchi, and K. Wittman-Teneze, Plasma Spray Elaboration of Finely Structured YSZ Thin Coating by Liquid Suspension Injection, Proceedings of the International Thermal Spray Conference 2003: Advancing the Science and Applying the Technology, C. Moreau and B. Marple, Eds., ASM International, Materials Park, OH, USA, 2003, p 661-66910.31399/asm.cp.itsc2003p0661 ↗
36. C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, and L. Bianchi, Finely Structured Ceramic Coatings Elaborated by Liquid Suspension Injection in a dc Plasma Jet, Proceedings of the International Thermal Spray Conference 2004: Thermal Spray Solutions Advances in Technology and Applications, ASM International, Materials Park, OH, USA, 200410.31399/asm.cp.itsc2004p0534 ↗
37. J. Fazilleau, C. Delbos, V. Rat, J.F. Coudert, P. Fauchais, B. Pateyron, Phenomena Involved in Suspension Plasma Spraying Part 1: Suspension Injection and Behavior, Plasma Chem. Plasma Process., 2006, 26, 371–39110.1007/s11090-006-9019-1 ↗
38. C. Delbos, J. Fazilleau, V. Rat, J.F. Coudert, P. Fauchais, B. Pateyron, Phenomena Involved in Suspension Plasma Spraying Part 2: Zirconia Particle Treatment and Coating Formation, Plasma Chem. Plasma Process., 2006, 26, 393–41410.1007/s11090-006-9020-8 ↗
39. A. Ozturk, B.M. Cetegen, Modeling of Axially and Transversely Injected Precursor Droplets into a Plasma Environment, Int. J. Heat Mass Tran., 2005, 48, 4367–438310.1016/j.ijheatmasstransfer.2005.05.015 ↗
40. R. Rampon, F.-L. Toma, G. Bertrand, C. Coddet, Liquid Plasma Sprayed Coatings of Stabilized Zirconia for SOFC Electrolytes, J. Therm. Spray Tech., 2006, 15(4), 682–68810.1361/105996306X146712 ↗
41. H. Mahdjoub, P. Roy, C. Filiatre, G. Bertrand, C. Coddet, The Effect of the Slurry Formulation Upon the Morphology of Spray-Dried Yttria Stabilised Zirconia Particles, J. Eur. Ceram. Soc., 2003, 23, 1637–164810.1016/S0955-2219(02)00412-0 ↗