Fracture failure of oil-collecting steel wire reinforced thermoplastic composite pipe
Source abstract
Abstract
A steel wire-reinforced thermoplastic composite pipe (SRTP) used as an oil connecting experienced fracture failure after 1.8 years’ service. In this paper, we conducted through on-site working condition investigation, visual physical inspection, analysis of the inner lining structure composition, physical and chemical properties analysis, thermal analysis, and mechanical analysis, and morphology analysis. The lining material of the SRTP exhibited significant swelling, which reduced its performance, and operation at high temperatures (>75°C) accelerated this process. Due to the swelling of oil and the permeation of CO 2 and H 2 S, the oil and acid gases penetrated the interlayer of the composite pipe and accumulated in the annular space, continuously corroding and weakening the steel wire. This process gradually reduced its load-bearing capacity and pressure resistance. It is recommended that non-metallic pipes should be selected according to the service conditions to ensure that the materials are consistent with the design requirements.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Material Properties and Failure Mechanisms · Structural Integrity and Reliability Analysis · Engineering Diagnostics and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Department of Applied Chemistry, School of Science, Northwestern Polytechnical University, Xi’an, China
Tubular Goods Research Institute, China National Petroleum Corporation & State Key Laboratory of Oil and Gas Equipment, Beijing, China
Funding
National Natural Science Foundation of China
References (23)
Show source-provided references
1. 10.1179/1743289811Y.000000000610.1179/1743289811Y.0000000006 ↗
2. Li Houbu, Li Helin, Qi Dongtao, et al. Analysis on non-metallic pipes used for oil and gas gathering and transformation. Petroleum Instruments. 2014; 28(6): 4–8.
3. Qi Guoquan, Cui Xiaohu, Qi Xiaobing, et al. Cracking failure of reinforced thermoplastic pipe used in ground gathering and transportation. Petroleum Tubular Goods & Instruments. 2020; 6(2): 79–82.
4. 10.1016/j.engfailanal.2022.10640310.1016/j.engfailanal.2022.106403 ↗
5. 10.1016/j.engfailanal.2021.10575010.1016/j.engfailanal.2021.105750 ↗
6. 10.1016/j.engfailanal.2023.10723210.1016/j.engfailanal.2023.107232 ↗
7. 10.1016/j.engfailanal.2016.06.01310.1016/j.engfailanal.2016.06.013 ↗
8. 10.1016/j.prostr.2023.05.00310.1016/j.prostr.2023.05.003 ↗
9. 10.1016/j.marstruc.2019.10270410.1016/j.marstruc.2019.102704 ↗
10. 10.1016/j.tws.2021.10838110.1016/j.tws.2021.108381 ↗
11. 10.1016/j.compstruct.2016.05.05110.1016/j.compstruct.2016.05.051 ↗
12. 10.1016/j.jpse.2021.05.00410.1016/j.jpse.2021.05.004 ↗
13. 10.1177/073168441562068710.1177/0731684415620687 ↗
14. 10.1080/17445302.2018.143411410.1080/17445302.2018.1434114 ↗
15. 10.1016/j.engfailanal.2021.10562610.1016/j.engfailanal.2021.105626 ↗
16. Souhila R, Ghabeche W, Kaddeche M, et al. Mechanical behaviour of machined polyethylene filaments subjected to aggressive chemical environments. Mechanika. 2009; 77: 40–46.
17. 10.1177/089270571036834910.1177/0892705710368349 ↗
18. Zheng JY, Yubin L, Kiang L, et al. Experimental investigation on mechanical properties of plastics pipes reinforced by cross-winding steel wire. China Plastics 2006; 20(6): 82–88.
19. Yuan L, Gong SF, Liang Jin W, et al. Analysis on buckling performance of submarine pipelines during deepwater pipe-laying operation. China Ocean Eng 2009; 23(2): 303–316.
20. 10.1016/j.compstruct.2019.11156010.1016/j.compstruct.2019.111560 ↗
21. 10.1016/j.compstruct.2022.11610010.1016/j.compstruct.2022.116100 ↗
22. 10.1007/s10443-021-09923-w10.1007/s10443-021-09923-w ↗
23. 10.1177/0021998322113627810.1177/00219983221136278 ↗