journal article·1998-11

Design, Manufacture, and Characterization of Composites Using On-Line Recycled Thermoplastic Powder Impregnation of Fibers and In-Situ Filament Winding

Mehrdad N. Ghasemi Nejhad, Karen M. Ikeda

Publisher page

Abstract

Recycled thermoplastic powder impregnated composites using in-situ filament winding and on-line consolidation of fibers have been successfully manufactured with the modified filament winding setup constructed in this study. Reclaimed low density polyethylene (RLDPE), reclaimed low-density polyethylene with polymer additives consisting of 0.25% by weight of Cyasorb® UV-3346 Light Stabilizer, 0.25% by weight of Cyasorb® UV-53 1 Light Stabilizer, and 0.08% by weight of Cyanox® 2777 Antioxidant (RLDPE-PA), and virgin low-density polyethylene (LDPE) were pulverized to ultrafine powders ranging from 20 to 300,um, and utilized to impregnate a separated fiberglass tow. After initial experiments, two powder-impregnated composite tubes were manufactured for each thermoplastic material system. The composites were then tested for tensile (hoop) strength and compressive bending strength under the ASTM D2290-95 and C-ring tests, respectively. This study showed that while the RLDPE composite did not perform well, composite samples made with RLDPE and polymer additives (i.e.. RLDPE-PA) performed better than RLDPE samples but not as well as composites made of virgin LDPE. The impregnation and consolidation steps in the manufacturing process were also effective for all three systems. The composite tubes exhibited very low void contents and high fiber volume fractions, while unmelted and unconsolidated thermoplastic powders were not present in the manufactured parts. The absence of fiber waviness and fiber migration through the thickness of the composite demonstrates that the online consolidation of powder-impregnated fibers was also effective. The collection of the separated powder-impregnated fibers prior to filament winding also seemed to be sufficient.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Mechanical Behavior of Composites · Epoxy Resin Curing Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Advanced Materials Manufacturing Laboratory, Department of Mechanical Engineering, University of Hawaii at Manoa, Holmes Hall 302, 2540 Dole Street, Honolulu, HI 96822

References (58)

Show source-provided references
1. 10.1177/08927057880010030510.1177/089270578800100305 ↗
2. Chang.I.Y. · 1276
3. Lee. S. M. · 1993
4. 4. Hepola. P. J. 1993. "Thermoplastic Pultrusion with On-Line Dry Powder Impregnation of Fibers (CCM Report 93-40)." Doctor of Philosophy Dissertation. Center for Composite Materials. University of Delaware.
5. Drzal. L. T. · 1995 · 511
6. 10.1177/00219983880220010610.1177/002199838802200106 ↗
7. 10.1177/08927057890020040410.1177/089270578900200404 ↗
8. 10.1177/00219983900240060310.1177/002199839002400603 ↗
9. 10.1177/08927057910040010210.1177/089270579100400102 ↗
10. 10.1115/1.291056210.1115/1.2910562 ↗
11. Ghasemi Nejhad, M. N. · 225
12. 10.1177/08927057930060020410.1177/089270579300600204 ↗
13. 10.1016/0266-3538(93)90007-410.1016/0266-3538(93)90007-4 ↗
14. Ramani, K. · Processing, Design and Performance of Composite Materials, ASME · 1994 · 52 · 45
15. 10.1177/08927057880010040510.1177/089270578800100405 ↗
16. Baucom, R. M. · 1990 · 14
17. 10.1177/08927057900030040410.1177/089270579000300404 ↗
18. 18. Baucom, R. M., J. H. Snoha and J. M. Marchello. 1991. "Process for Application of Powder Particles to Filamentary Materials," US patent 5,057.338.
19. 19. Kastel, R. P. Hepola and R. B. Pipes. 1992. "Design and Construction of an On-Line Powder Impregnation Facility for Thermoplastic Pultrusion (CCM Report 92-39)." Masters Thesis. Center for Composite Materials, University of Delaware.
20. Lyon, K. R. · 1301
21. Bucher. R. A. · Journal of Advanced Materials · 1994 · 44
22. 22. Muzzy, J. D. 1994. "Towpregs from Recycled Plastics by Powder Fusion Coating and Method of Production Therefor [sic]," US patent 5.302,419.
23. Ramani. K. · Processing, Design and Performance of Composite Materials, ASME · 1994 · 52 · 183
24. Baucom. R. M. · Journal of Advanced Materials · 1994 · 31
25. Veale. C. R. · 1972
26. Hugh. M. K. · 1040
27. Padaki. S. · 1177
28. 28. Khait. K. 1996. Letter to authors.
29. Ogando. J. · 1994 · 37
30. Curlee. T. R. · 1986
31. 31. European Owens-Corning Fiberglas [sic]. 1992. Product Data: R43 Cosmostrand R Rovings.
32. 32. Owens-Corning Fiberglas [sic] Corporation EQA Department. 1996. Owiens Corning Customer Acceptance Standard No. ERF 32: Cosmostrand R R43SX6 Direct Rovingfor Long Fibers Reinforcement of Thermoplastics .
33. Pearson, W. E. · 493
34. 34. Hong. D. 1996. Personal communication. Island Plastic Bags. Honolulu, Hawaii.
35. 35. Rasmussen. J. 1996. Letter to authors.
36. 36. Eng. J. M. 1996a. Letter to authors.
37. Eng. M. · 1996
38. 10.1007/978-1-4615-9723-010.1007/978-1-4615-9723-0 ↗
39. Cytec Industries. Inc. · 1993
40. Cvtec Industries. Inc. · 1993
41. Cytec Industries. Inc. · 1996
42. 42. American Cyanamid Company. Polymer Chemicals Department. 1990. POLYMIER ADDITIVES. Cyanox R 27' antioxidant 1. 2 BLEND OF CYANOX 'I 90 A.VTIOXIDANT and TRIS (2,4-DI-t-BUTYLPHEN'YL) PHOSPHA TE.
43. Sheldon. R. P. · 1982
44. 44. Quantum Chemical Company. 1994. Petrothene ® NA 204-000 Lowi Density Polyethylene. Injection Molding Grade, Density 0.918 Melt Index-7.0.
45. 45. Chandramouli. M. V. 1995. "Manufacture of Near-Net Shape Ceramic Matrix Composites by Filament Winding and Preceramic Polymer Pyro N 7sis." Masters Thesis. Department of Mechanical Engineering. University of Hawaii.
46. Shakespeare Company Product Catalogue · 1995
47. 10.1177/07316844930120060710.1177/073168449301200607 ↗
48. Pitchumani, R. · Journal of Thermoplastic Composite Materials · 1998
49. 10.1177/08927057970100060410.1177/089270579701000604 ↗
50. 50. American Society for Testing and Materials [ASTM]. 1995. ASTM Designation: D2290-92: Standard Test Methodfor Apparent Tensile Strength of Ring or Tubular Plastics and Reinforced Plastics by Split Disk Method, 15.03:34-39.
51. Evans, J. R. G. · British Ceramic Transactions · 1984 · 83 · 14
52. 10.1007/BF0055146410.1007/BF00551464 ↗
53. 10.1533/978184569925310.1533/9781845699253 ↗
54. 10.1520/STP24594S10.1520/STP24594S ↗
55. 10.1016/0022-5096(94)90070-110.1016/0022-5096(94)90070-1 ↗
56. 10.1177/00219983920260110310.1177/002199839202601103 ↗
57. 10.1177/00219983920260110410.1177/002199839202601104 ↗
58. 10.1016/0020-7462(92)90054-B10.1016/0020-7462(92)90054-B ↗