journal article·2025-06

Ecofriendly hybrid natural fiber reinforced polypropylene composites from biowastes

Laongdaw Techawinyutham, Wiroj Techawinyutham, Vinod Ayyappan, Mavinkere Rangappa Sanjay, Suchart Siengchin

Publisher page

Abstract

The used ground coffee waste (GCW) and tea leaf waste (TLW), the large wastes from the beverage process, were selected as natural reinforcement and natural pigment in the polypropylene (PP) matrix. In this work, the maleic anhydride polypropylene (MAPP) was added to the composites to develop the compatibility between fillers, fibers, and polymer matrix. The TLW/PP composites, GCW/PP composites, and GCW/TLW/PP hybrid composites were prepared in the ratio of TLW and GCW ranging from 0 to 30 wt% with the addition of MAPP at 5 wt% of fillers. The presence of GCW and TLW in the PP matrix decreased tensile properties and impact resistance but increased flexural modulus and hardness of PP at high concentrations of GCW and TLW. The increase in GCW and TLW concentration slightly reduced melting temperature but it enhanced the tensile and flexural modulus. Furthermore, it enhanced the hardness, thermal and rheological properties of the composites. The TLW/PP composites had better mechanical properties, and rheological properties than GCW/PP composites but thermal properties were quite similar. The mechanical properties of GCW/TLW/PP hybrid composites were better than those of GCW/PP composites but lower than those of TLW/PP composites. The rheological and thermal behaviour of hybrid composites were like that of TLW/PP composites. Incorporating MAPP improves the mechanical and rheological behavior of PP composites by enhancing the interaction among PP, GCW, and TLW. However, this addition does not significantly enhance the composites’ thermal properties. The optimum composite was hybrid composites of GCW/TLW/PP consisting of GCW of 10 wt%, TLW of 20 wt%, and MAPP of 1.5 wt% which presented good mechanical, thermal, and rheological properties. The mechanical properties of this hybrid composites were as follows: a tensile strength of 26.35 MPa, elongation at break of 10.91%, tensile modulus of 636.69 MPa, flexural strength of 45.57 MPa, flexural modulus of 3632.86 MPa, impact resistance of 12.72 kJ/m 2 , and a Shore D hardness of 76.15. The overall results showed that GCW and TLW can be used as reinforcement material and natural pigment in the polymer matrix.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Additive Manufacturing and 3D Printing Technologies · Sustainable Design and Development

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Production and Robotics Engineering, Faculty of Engineering, King Mongkut’s University of Technology North Bangkok (KMUTNB), Bangkok, Thailand

Natural Composites Research Group Lab, Department of Materials and Production Engineering, The Sirindhorn International Thai-German Graduate School of Engineering (TGGS), King Mongkut’s University of Technology North Bangkok (KMUTNB), Bangkok, Thailand

Funding

King Mongkut’s University of Technology North Bangkok

References (80)

Show source-provided references
1. 10.1016/j.commatsci.2012.03.02110.1016/j.commatsci.2012.03.021 ↗
2. 10.1007/s40430-020-02517-w10.1007/s40430-020-02517-w ↗
3. 10.1002/pse.11210.1002/pse.112 ↗
4. 10.1016/j.compositesb.2015.05.03310.1016/j.compositesb.2015.05.033 ↗
5. 10.1016/j.matdes.2014.06.05810.1016/j.matdes.2014.06.058 ↗
6. 10.1016/j.matpr.2017.07.25110.1016/j.matpr.2017.07.251 ↗
7. 10.3390/waste101000210.3390/waste1010002 ↗
8. Coffee statistics. https://www.e-importz.com/coffee-statistics.php (nd accessed 18 March 2021).
9. News LA. Global coffee production expected to recover in 2022/23 with Brazil crop. Rio Times 2022. https://www.riotimesonline.com/brazil-news/rio-business/global-coffee-production-expected-to-recover-in-2022-23-with-brazil-crop/ (accessed 10 August 2023).
10. 10.3390/metabo1303041210.3390/metabo13030412 ↗
11. Coffee - Worldwide | Statista Market Forecast. Statista. https://www.statista.com/outlook/cmo/hot-drinks/coffee/worldwide (nd accessed 18 March 2021).
12. Dufrêne B. The 2020 global tea market report. Tea Coffee Trade J. https://www.teaandcoffee.net/feature/25850/the-2020-global-tea-market-report/ (nd, accessed 18 March 2021).
13. Shahbandeh M. Tea consumption wby country. Hamburg: Statista. https://www.statista.com/statistics/940102/global-tea-consumption/ (nd, accessed 18 March 2021).
14. Bolton D. Tracking tea trends with 2020 foresight. Las Vegas, NV: World Tea News. https://www.worldteanews.com/Insights/tracking-tea-trends-2020-foresight (2020, accessed March 18, 2021).
15. 10.1007/s10924-021-02090-w10.1007/s10924-021-02090-w ↗
16. 10.4028/www.scientific.net/MSF.880.7310.4028/www.scientific.net/MSF.880.73 ↗
17. 10.1155/2017/625815110.1155/2017/6258151 ↗
18. 10.1016/j.carbpol.2018.02.01810.1016/j.carbpol.2018.02.018 ↗
19. 10.3390/polym1108133610.3390/polym11081336 ↗
20. 10.3390/en1322603410.3390/en13226034 ↗
21. 10.1016/j.jmrt.2020.02.03210.1016/j.jmrt.2020.02.032 ↗
22. 10.1177/152808372095739210.1177/1528083720957392 ↗
23. 10.1016/j.matpr.2019.09.22110.1016/j.matpr.2019.09.221 ↗
24. 10.1007/s00289-019-02947-010.1007/s00289-019-02947-0 ↗
25. 10.1016/j.jece.2015.11.02910.1016/j.jece.2015.11.029 ↗
26. 10.11113/mjfas.v16n6.189710.11113/mjfas.v16n6.1897 ↗
27. Comparison between coconut and curaua fibers chemically treated for compatibility with PP matrixes - Priscila F de Oliveira Maria de Fátima V Marques. https://journals.sagepub.com/doi/abs/10.1177/0731684413516392 (2014 accessed 16 April 2024).
28. 10.3390/ma1224418510.3390/ma12244185 ↗
29. 10.1016/B978-0-12-814509-8.00016-610.1016/B978-0-12-814509-8.00016-6 ↗
30. 10.3389/fnut.2020.57697410.3389/fnut.2020.576974 ↗
31. 10.1016/j.compositesb.2019.10710810.1016/j.compositesb.2019.107108 ↗
32. 10.3390/polym1202045810.3390/polym12020458 ↗
33. 10.3390/polym1204092910.3390/polym12040929 ↗
34. 10.1007/s10965-012-9921-610.1007/s10965-012-9921-6 ↗
35. 10.1016/S1672-6529(16)60443-210.1016/S1672-6529(16)60443-2 ↗
36. 10.1016/j.polymdegradstab.2008.05.02410.1016/j.polymdegradstab.2008.05.024 ↗
37. 10.1016/j.eurpolymj.2006.03.02910.1016/j.eurpolymj.2006.03.029 ↗
38. 10.1063/1.161044110.1063/1.1610441 ↗
39. 10.9734/BJAST/2016/2217810.9734/BJAST/2016/22178 ↗
40. 10.1016/j.chemosphere.2019.01.10010.1016/j.chemosphere.2019.01.100 ↗
41. 10.1007/s10965-022-03028-z10.1007/s10965-022-03028-z ↗
42. 10.1002/sia.261910.1002/sia.2619 ↗
43. 10.1016/S0032-3861(99)00377-810.1016/S0032-3861(99)00377-8 ↗
44. 10.1016/j.compscitech.2020.10837910.1016/j.compscitech.2020.108379 ↗
45. 10.1016/S0277-5387(00)00571-410.1016/S0277-5387(00)00571-4 ↗
46. 10.1016/j.compositesa.2019.10565810.1016/j.compositesa.2019.105658 ↗
47. 10.1016/j.polymdegradstab.2011.12.01410.1016/j.polymdegradstab.2011.12.014 ↗
48. 10.1016/j.polymdegradstab.2016.09.01110.1016/j.polymdegradstab.2016.09.011 ↗
49. 10.1016/j.polymdegradstab.2019.04.02010.1016/j.polymdegradstab.2019.04.020 ↗
50. 10.1016/j.apsusc.2014.08.14010.1016/j.apsusc.2014.08.140 ↗
51. 10.1016/j.polymdegradstab.2004.12.00810.1016/j.polymdegradstab.2004.12.008 ↗
52. 10.1016/j.compositesb.2015.03.08010.1016/j.compositesb.2015.03.080 ↗
53. 10.15376/biores.15.2.3427-344210.15376/biores.15.2.3427-3442 ↗
54. 10.3390/polym1421467810.3390/polym14214678 ↗
55. 10.1088/1757-899X/553/1/01204710.1088/1757-899X/553/1/012047 ↗
56. 10.3390/jcs605014510.3390/jcs6050145 ↗
57. 10.1177/073168441140875210.1177/0731684411408752 ↗
58. 10.1016/j.matpr.2019.09.13210.1016/j.matpr.2019.09.132 ↗
59. 10.1080/21655979.2019.166169410.1080/21655979.2019.1661694 ↗
60. 10.1002/app.1354310.1002/app.13543 ↗
61. 10.1002/app.5143410.1002/app.51434 ↗
62. 10.1002/pc.2813310.1002/pc.28133 ↗
63. 10.1016/j.matpr.2019.06.26010.1016/j.matpr.2019.06.260 ↗
64. 10.1002/pc.2617510.1002/pc.26175 ↗
65. 10.1007/s12221-021-9219-610.1007/s12221-021-9219-6 ↗
66. 10.1002/app.2701710.1002/app.27017 ↗
67. 10.1016/j.polymdegradstab.2015.08.01110.1016/j.polymdegradstab.2015.08.011 ↗
68. 10.1007/s10853-016-0248-210.1007/s10853-016-0248-2 ↗
69. 10.15376/biores.11.3.7637-765310.15376/biores.11.3.7637-7653 ↗
70. 10.1177/002199832097681110.1177/0021998320976811 ↗
71. 10.1002/pc.2660810.1002/pc.26608 ↗
72. 10.1063/1.496811810.1063/1.4968118 ↗
73. 10.1002/pc.2577610.1002/pc.25776 ↗
74. 10.1021/ie300738d10.1021/ie300738d ↗
75. 10.1002/pc.2563410.1002/pc.25634 ↗
76. 10.1080/0022234100360933610.1080/00222341003609336 ↗
77. 10.15376/biores.8.4.6263-627910.15376/biores.8.4.6263-6279 ↗
78. 10.1177/089270571561874310.1177/0892705715618743 ↗
79. 10.1002/pat.350610.1002/pat.3506 ↗
80. 10.1021/ie400848t10.1021/ie400848t ↗