journal article·2018-02

Effect of discontinuous long polyimide fiber on mechanical properties, fracture morphology, and crystallization behaviors of polyamide-6 matrix composites

Chichi Jiang, Enlin Han, Xiaodong Wang, Dezhen Wu

Publisher page

Abstract

This work has conducted an extensive investigation on the effect of discontinuous long polyimide (PI) fiber on the mechanical properties, fracture morphology, and crystallization behaviors of polyamide-6 (PA6) matrix composites. A series of PA6 matrix composites with different contents of PI fiber were prepared through a standard melt-pultrusion process. The resulting composite specimens not only achieved a prominent reinforcement but also obtain a significant improvement in impact toughness. It is highlighted that the composites achieved a remarkable increase in Izod impact strength by a factor of five compared to pure PA6 when 12 wt% of PI fiber was incorporated. Moreover, the tensile strength of the composites reached 143 MPa at a fiber content of 18 wt%. The mechanical properties could be well predicted by the Cox-Krenchel model, but a negative deviation in experimental data was observed at high fiber concentrations due to the decrease of residual fiber length and fiber aggregation. The morphologic observation of fracture surface indicated that fiber pullout was a major mechanism for tensile failure as a result of long PI fiber-reinforcing effectiveness, and it was also the predominant energy absorption mechanism for the impact fracture of composite specimens. The presence of long PI fiber not only enhanced the crystallinity of PA6 matrix but also induced a well-defined transcrystalline layer on the fiber surface due to its high nucleating ability.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Natural Fiber Reinforced Composites · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

State Key Laboratory of Organic-Inorganic Composites, Beijing University of Chemical Technology, Beijing, China

Changzhou Institute of Advanced Materials, Beijing University of Chemical Technology, Changzhou, Jiangsu Province, China

References (62)

Show source-provided references
1. 10.1016/0266-3538(88)90067-X10.1016/0266-3538(88)90067-X ↗
2. 10.1002/pc.2309010.1002/pc.23090 ↗
3. 10.1016/j.compositesb.2013.03.02310.1016/j.compositesb.2013.03.023 ↗
4. 10.1016/j.compscitech.2014.08.01410.1016/j.compscitech.2014.08.014 ↗
5. 10.1016/j.apsusc.2008.08.01310.1016/j.apsusc.2008.08.013 ↗
6. 10.1016/j.mseb.2007.06.00210.1016/j.mseb.2007.06.002 ↗
7. 10.1177/073168441351222710.1177/0731684413512227 ↗
8. 10.1016/j.wear.2009.08.03810.1016/j.wear.2009.08.038 ↗
9. 10.1016/j.conbuildmat.2015.07.11810.1016/j.conbuildmat.2015.07.118 ↗
10. 10.1002/(SICI)1097-4628(19991017)74:3<523::AID-APP7>3.0.CO;2-R10.1002/(SICI)1097-4628(19991017)74:3<523::AID-APP7>3.0.CO;2-R ↗
11. 10.1016/j.msea.2008.11.06310.1016/j.msea.2008.11.063 ↗
12. 10.1016/j.matchemphys.2012.01.10510.1016/j.matchemphys.2012.01.105 ↗
13. 10.1016/j.eurpolymj.2015.03.02810.1016/j.eurpolymj.2015.03.028 ↗
14. 10.1002/mame.20150013010.1002/mame.201500130 ↗
15. 10.1039/c3ra44876b10.1039/c3ra44876b ↗
16. 10.1016/j.conbuildmat.2015.03.08010.1016/j.conbuildmat.2015.03.080 ↗
17. 10.1016/j.polymer.2009.04.01910.1016/j.polymer.2009.04.019 ↗
18. 10.1016/j.radphyschem.2015.06.02410.1016/j.radphyschem.2015.06.024 ↗
19. 10.1016/j.memsci.2013.06.03710.1016/j.memsci.2013.06.037 ↗
20. 10.1016/S1359-8368(01)00064-610.1016/S1359-8368(01)00064-6 ↗
21. 10.1016/j.surfcoat.2010.04.04910.1016/j.surfcoat.2010.04.049 ↗
22. 10.1016/j.compositesa.2014.09.01210.1016/j.compositesa.2014.09.012 ↗
23. 10.1016/j.electacta.2013.03.00510.1016/j.electacta.2013.03.005 ↗
24. 10.1021/ma400612y10.1021/ma400612y ↗
25. 10.1016/j.matpr.2015.07.05710.1016/j.matpr.2015.07.057 ↗
26. 10.1002/app.3642510.1002/app.36425 ↗
27. 10.1016/j.compositesa.2010.05.01110.1016/j.compositesa.2010.05.011 ↗
28. 10.1016/j.matdes.2013.06.05110.1016/j.matdes.2013.06.051 ↗
29. 10.1002/pc.2019510.1002/pc.20195 ↗
30. 10.1016/j.compscitech.2015.01.00110.1016/j.compscitech.2015.01.001 ↗
31. 10.1002/app.1982.07027102410.1002/app.1982.070271024 ↗
32. 10.1016/j.matdes.2011.10.03910.1016/j.matdes.2011.10.039 ↗
33. 10.1002/pc.1001510.1002/pc.10015 ↗
34. 10.1002/pc.75015011010.1002/pc.750150110 ↗
35. 10.1016/S0301-679X(99)00017-110.1016/S0301-679X(99)00017-1 ↗
36. 10.1016/j.compositesa.2004.03.00410.1016/j.compositesa.2004.03.004 ↗
37. 10.1016/j.apsusc.2013.03.06410.1016/j.apsusc.2013.03.064 ↗
38. 10.1016/j.apsusc.2014.03.15010.1016/j.apsusc.2014.03.150 ↗
39. 10.1016/j.vacuum.2009.01.08010.1016/j.vacuum.2009.01.080 ↗
40. 10.1016/j.polymertesting.2008.03.00110.1016/j.polymertesting.2008.03.001 ↗
41. 10.1016/S0032-3861(02)00848-010.1016/S0032-3861(02)00848-0 ↗
42. 10.1016/j.matlet.2012.08.08810.1016/j.matlet.2012.08.088 ↗
43. 10.1039/C5RA10943D10.1039/C5RA10943D ↗
44. 10.1007/BF0198746310.1007/BF01987463 ↗
45. 10.1002/pen.2415410.1002/pen.24154 ↗
46. Chang JJ · J Appl Polym Sci · 2474 · 132 · 2015
47. Wu D, Niu H, Qi S, Polyimide fiber with high strength and high modulus and its preparation method. Patent 0137, 846 A1, USA, 2013.
48. 10.1002/pen.2381310.1002/pen.23813 ↗
49. 10.1177/073168441559907110.1177/0731684415599071 ↗
50. 10.1002/mame.20050005110.1002/mame.200500051 ↗
51. 10.1007/BF0064778310.1007/BF00647783 ↗
52. 10.1016/j.compositesa.2008.10.01310.1016/j.compositesa.2008.10.013 ↗
53. 10.1016/j.compositesa.2008.08.00110.1016/j.compositesa.2008.08.001 ↗
54. Berg J · Compos A Appl Sci Manuf · 1998 · 29 · 164110.1016/S1359-835X(98)00091-8 ↗
55. 10.1016/j.compositesa.2006.01.00710.1016/j.compositesa.2006.01.007 ↗
56. 10.1016/S1359-835X(96)00127-310.1016/S1359-835X(96)00127-3 ↗
57. 10.1002/1439-2054(20020801)287:8<515::AID-MAME515>3.0.CO;2-B10.1002/1439-2054(20020801)287:8<515::AID-MAME515>3.0.CO;2-B ↗
58. 10.1016/j.cap.2013.09.00910.1016/j.cap.2013.09.009 ↗
59. 10.1016/S0032-3861(98)00240-710.1016/S0032-3861(98)00240-7 ↗
60. 10.1002/mame.20030015110.1002/mame.200300151 ↗
61. 10.1016/S0032-3861(96)00361-810.1016/S0032-3861(96)00361-8 ↗
62. 10.1016/S0266-3538(99)00026-310.1016/S0266-3538(99)00026-3 ↗