journal article·2008-03

Development of HEMP Fiber Reinforced Polypropylene Composites

Hajnalka Hargitai, Ilona Rácz, Rajesh D. Anandjiwala

Publisher page

Abstract

Nonwoven mats from hemp and polypropylene fibers in various proportions are produced and hot pressed to make composite material. The effect of hemp fiber content and anisotropy in the nonwoven mats resulting from the carding technology are examined on the basis of the three-point bending, tensile, and impact properties of the resultant composite materials. Because of the hydrophilic nature and poor dimensional stability of cellulosic fibers due to swelling, the effect of water sorption on mechanical performances is also investigated. Optimal mechanical properties are achieved in composites made from 40 to 50% of hemp fiber by weight. As expected, better mechanical properties are found in the specimens cut from the composite sheets parallel to the direction of carding. A strong decrease in three-point bending properties is noticed after immersing the composite samples in distilled water for 19 days, while the impact strength increased. Double carding of raw materials results in a decreased anisotropy in the composite material.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Natural Fiber Reinforced Composites · Polymer crystallization and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

CSIR Materials Science and Manufacturing, Fibres and Textiles Competence Area, P.O. Box 1124, Port Elizabeth 6000, South Africa

CSIR Materials Science and Manufacturing, Fibres and Textiles Competence Area, P.O. Box 1124, Port Elizabeth 6000, South Africa,

CSIR Materials Science and Manufacturing, Fibres and Textiles Competence Area, P.O. Box 1124, Port Elizabeth 6000, South Africa, Department of Textile Science, Faculty of Science, P.O. Box 77000 Nelson Mandela Metropolitan University, Port Elizabeth 6031, South Africa

References (14)

Show source-provided references
1. Peijs, T.
2. Oksman, K.
3. Young, R.A. (1997). Utilization of Natural Fibres: Characterization, Modification and Application, In: Rowell, R.M., Schultz, T.P. and Narayan, R. (eds), Lignocellulosic-Plastic Composites, pp. 1—21, VSP, Sao Paulo, Brazil.
4. Rowell, R.M.
5. Bledzki, A.K. and Gassan, J. (1997). Natural Fibre Reinforced Plastics, In: Cheremisinoff, N.P. (ed.), Handbook of Engineering Polymeric Materials, pp. 787—809, Marcel Dekker, New York, Basel, Hong Kong.
6. Rowell, R.M.
7. Hatakeyama, H. · Journal of Applied Polymer Science: Applied Polymer Symposium · 1983 · 37 · 979
8. Sanadi, A., Caulfield, D.F. and Jacobson, R.E. (1997). Agro-Fiber/Thermoplastic Composites, In: Rowell, R.M., et al. (eds), Paper and Composites from Agro-Based Resources, p. 377, Lewis Publishers, New York.
9. Hargitai, H. · Composites · 2000 · 7
10. 10.1016/S0168-583X(99)00075-010.1016/S0168-583X(99)00075-0 ↗
11. Köhler, E.
12. Wielage, B. · Kunststoffe · 1999 · 89 · 60
13. 10.1080/0091403000803132110.1080/00914030008031321 ↗
14. Hargitai, H.