journal article·2018-05

Three-dimensional microscopic assessment of randomly distributed representative volume elements for high fiber volume fraction unidirectional composites

Aram Bahmani, Geng Li, Thomas L. Willett, John Montesano

Publisher page

Abstract

Abstract Generating realistic non-uniformly distributed three-dimensional representative volume element (RVE) for modeling the response of high fiber volume fraction composites is challenging. A novel rapid approach employing a random event-driven molecular dynamics simulation (EDMD) was proposed in this study for this purpose. Distributions of continuous unidirectional fibers in the RVEs were assessed using two approaches, namely Voronoi tessellations and radial distribution functions. The developed method was highly efficient in generating RVEs with realistic fiber dispersions. Furthermore, applying the corresponding periodic boundary conditions (PBCs) for finite element modeling is also arduous. A technique was developed within the commercial finite element software ABAQUS to rapidly produce required matching mesh patterns on opposite surfaces of the RVE, and to apply the corresponding PBCs using custom scripts. By coupling the EDMD approach and custom scripts within ABAQUS to rapidly generate and mesh RVEs with high fiber volume fractions, evaluation of the RVE response was greatly simplified. In- and out-of-plane elastic properties of unidirectional glass/epoxy composite in a range of 10–80% fiber volume fractions were determined and compared with analytical models, and available experimental data, with good correlation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Fiber-reinforced polymer composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. The effect of interleaved composite nanofibrous mats on delamination behavior of polymeric composite materials10.1016/j.compstruct.2013.10.039 ↗
2. Investigation of interleaf sequence effects on impact delamination of nano-modified woven composite laminates using cohesive zone model10.1016/j.compstruct.2017.01.035 ↗
3. Impact response of glass/epoxy laminate interleaved with nanofibrous mats10.5267/j.esm.2013.09.002 ↗
4. Loading analysis of composite wind turbine blade for fatigue life prediction of adhesively bonded root joint10.1007/s10443-014-9405-4 ↗
5. Mohammadi B, Rohanifar M, Salimi-majd D. Micromechanical prediction of damage due to transverse ply cracking under fatigue loading in composite laminates. 2017. doi:10.1177/0731684416676635.10.1177/0731684416676635 ↗
6. Autar K. Kaw. Mechanics of composite materials. 29. 2006. doi:10.1016/j.fsigen.2011.07.001.10.1016/j.fsigen.2011.07.001 ↗
7. Datoo M. Mechanics of fibrous composites 1991:620. doi:10.1007/s13398-014-0173-7.2.10.1007/978-94-011-3670-9 ↗
8. Fracture behaviour of a single-fibre graphite/epoxy model composite containing a broken fibre or cracked matrix10.1007/BF00560634 ↗
9. Estimation of fibre and interfacial shear strength by using a single-fibre composite10.1016/0266-3538(95)00078-X ↗
10. Estimation of strength distribution for a fiber embedded in a single-fiber composite: experiments and statistical simulation based on the elasto-plastic shear-lag approach10.1016/S0266-3538(01)00080-X ↗
11. A computer simulation of single fiber pull out process in a composite10.1177/002199803036267 ↗
12. Statistical simulation of fiber fragmentation in a single-fiber composite10.1016/S0266-3538(97)00008-0 ↗
13. Determination of interface properties from experiments on the fragmentation process in single-fiber composites10.1016/j.msea.2007.07.067 ↗
14. Fiber packing and elastic properties of a transversely random unidirectional glass/epoxy composite10.1016/S0266-3538(99)00152-9 ↗
15. A micromechanical study of stress concentrations in composites10.1016/j.compositesb.2017.09.009 ↗
16. Modeling of non-uniform spatial arrangement of fibers in a ceramic matrix composite10.1016/S1359-6454(96)00394-1 ↗
17. Computer simulation of close random packing of equal spheres10.1103/PhysRevA.32.2347 ↗
18. Generation of random distribution of fibres in long-fibre reinforced composites10.1016/j.compscitech.2008.03.013 ↗
19. Statistical analysis of real and simulated fibre arrangements in unidirectional composites10.1016/j.compscitech.2013.07.030 ↗
20. A new method for generating random fibre distributions for fibre reinforced composites10.1016/j.compscitech.2012.12.001 ↗
21. Quantitative description and numerical simulation of random microstructures of composites and their effective elastic moduli10.1016/S0020-7683(02)00462-6 ↗
22. A combined experimental-numerical approach for generating statistically equivalent fibre distributions for high strength laminated composite materials10.1016/j.compscitech.2009.10.020 ↗
23. Micromechanical modeling of fiber-reinforced composites with statistically equivalent random fiber distribution10.3390/ma10010001 ↗
24. A comparison between random model and periodic model for fiber-reinforced composites based on a new method for generating fiber distributions10.1002/pc.23562 ↗
25. Studies in molecular dynamics. I. General method10.1063/1.1730376 ↗
26. Geometric properties of random disk packings10.1007/BF01025983 ↗
27. A comprehensive validation of analytical homogenization models: the case of ellipsoidal particles reinforced composites10.1016/j.mechmat.2014.03.014 ↗
28. Jamming in hard sphere and disk packings10.1063/1.1633647 ↗
29. Three-dimensional mesoscale modelling of concrete composites by using random walking algorithm10.1016/j.compscitech.2017.06.015 ↗
30. Representative volume element for parallel fiber bundles: model and size convergence10.1016/j.compositesa.2016.04.018 ↗
31. Micromechanical FE analysis of UD fibre-reinforced composites with fibres distributed at random over the transverse cross-section10.1016/j.compositesa.2005.01.010 ↗
32. Effect of fabric weaves on the dynamic response of two-dimensional woven fabric composites10.1007/s10853-017-1183-6 ↗
33. Unidirectional high fiber content composites: automatic 3D FE model generation and damage simulation10.1016/j.commatsci.2009.09.023 ↗
34. An integrated computational framework for simulating the failure response of carbon fiber reinforced polymer composites10.1007/s00466-017-1457-5 ↗
35. A novel approach to impose periodic boundary condition on braided composite RVE model based on RPIM10.1016/j.compstruct.2016.12.032 ↗
36. Computational micromechanics of fiber kinking in unidirectional FRP under different environmental conditions10.1016/j.compscitech.2017.03.014 ↗
37. Periodic mesh generation and homogenization of inclusion-reinforced composites using an element-carving technique with local mesh refinement10.1016/j.compstruct.2017.10.088 ↗
38. Finite-volume homogenization of elastic/viscoelastic periodic materials10.1016/j.compstruct.2017.09.044 ↗
39. Validation of a representative volume element for unidirectional fiber-reinforced composites: case of a monotonic traction in its cross section10.1016/j.compstruct.2016.07.020 ↗
40. Multi-scale finite element analyses on the thermal conductive behaviors of 3D braided composites10.1016/j.compstruct.2016.02.029 ↗
41. Representative volume element for composites reinforced by spatially randomly distributed discontinuous fibers and its applications10.1016/j.compstruct.2015.05.014 ↗
42. Experimental/numerical study of anisotropic water diffusion in glass/epoxy composites10.1088/1757-899X/139/1/012044 ↗
43. Processability and tensile performance of continuous glass fiber/polyamide laminates for structural load-bearing applications
44. An analytical method for predicting cutting forces in orthogonal machining of unidirectional composites10.1016/j.compscitech.2010.09.005 ↗
45. A damage based model for crack initiation in unidirectional composites under multiaxial cyclic loading10.1016/j.compscitech.2014.05.012 ↗
46. Rao · Effect of architecture on mechanical properties of carbon/carbon composites · 2008 · 83 · 131
47. DynamO: a free O(N) general event-driven molecular dynamics simulator10.1002/jcc.21915 ↗
48. Stable algorithm for event detection in event-driven particle dynamics10.1007/s40571-014-0021-8 ↗
49. Fabert V, Gunzburger M. Centroidal Voronoi Tessellations : Applications and Algorithms Author (s): Qiang Du, Vance Faber and Max Gunzburger Published by : Society for Industrial and Applied Mathematics Stable URL : http://www.jstor.org/stable/2653198 REFERENCES Linked referen 2017;41:637–76.10.1137/S0036144599352836 ↗
50. A model system for examining the radial distribution function10.1119/1.1758228 ↗
51. Transverse elastic moduli of unidirectional fiber composites with fiber/matrix interfacial debonding10.1016/0266-3538(95)00026-7 ↗
52. Sudheer · Analytical and numerical validation of epoxy/glass structural composites for elastic models · 2015 · 5 · 162
53. Tension behavior of unidirectional glass/epoxy composites under different strain rates10.1016/j.compstruct.2008.06.012 ↗