Delamination analysis of CFRP laminates exposed to lightning strike considering cooling process
Source abstract
Abstract
Abstract This study examined the damage mechanisms of CFRP laminates exposed to lightning strike. Simulated lightning current testing elucidated the CFRP laminate damage behavior. Thermogravimetric analysis results revealed the pyrolysis behavior. Coupled thermal–electrical analysis, heat transfer analysis , and stress analysis using cohesive elements were conducted using finite element method (FEM) incorporating a CFRP thermal decomposition model. Delamination was simulated using a cohesive-element model. As results, it was revealed that the consideration of cooling processes after the application of impulse current is significantly important as elucidating the lightning strike damage mechanism. Numerical analysis results corresponded with experimentally obtained results, but with a smaller delamination area, which implied that reduced interlaminar strength (fracture toughness) attributable to the progress of thermal decomposition accompanying heat generation dominated delamination from lightning strike damage. In addition, other phenomena including mechanical loading also affect lightning strike damage.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Lightning and Electromagnetic Phenomena · Electrical Fault Detection and Protection · Smart Materials for Construction
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Lightning strike damage resistance and tolerance of scarf-repaired mesh-protected carbon fiber composites10.1016/j.compositesa.2011.05.007 ↗
2. Artificial lightning testing on graphite/epoxy composite laminate10.1016/j.compositesa.2010.06.008 ↗
3. Experimental study of damage characteristics of carbon woven fabric/epoxy laminates subjected to lightning strike10.1016/j.compositesa.2015.09.019 ↗
4. Damage resistance and tolerance of carbon/epoxy composite coupons subjected to simulated lightning strike10.1016/j.compositesa.2009.04.025 ↗
5. A method to replace lightning strike tests by ball impacts in the design process of lightweight composite aircraft panels10.1016/j.ijimpeng.2017.09.007 ↗
6. Huchette C, Rannou J, Roche JM, Lapeyronnie P, Beauchêne P, Chemartin L. An analysis of lightning direct effects on CFRP panels. Part I, the experimental and material point of view. In: International Conference on Lightning & Static Electricity 2017. Nagoya, September 2017.
7. Mamizu H, Kuraishi A, Ikeda Y, Saito K, Wakayama T, Hirano Y, et al. Lightning Damage Evaluation of Composite Laminates Using Direct Measurements. In: International Conference on Lightning & Static Electricity 2017. Nagoya, September 2017.
8. Effect of thin-ply on damage behavior of continuous and discontinuous carbon fiber reinforced thermoplastics subjected to simulated lightning strike10.1016/j.compositesa.2017.01.010 ↗
9. Modelling of lightning strike damage to CFRP composites with an advanced protection system. Part I: Thermal–electrical transition10.1016/j.compstruct.2017.01.008 ↗
10. Multi-functional carbon fibre composites using carbon nanotubes as an alternative to polymer sizing
11. Desigh of a hybrid carbon fiber/carbon nanotube composite for enhanced lightning strike resistance10.1016/j.ast.2015.10.002 ↗
12. Carbon nanofiber paper for lightning strike protection of composite materials10.1016/j.compositesb.2009.06.009 ↗
13. The combination of carbon nanotube buckypaper and insulating adhesive for lightning strike protection of the carbon fiber/epoxy laminates10.1016/j.carbon.2015.06.026 ↗
14. Development and characterization of CFRP using a polyaniline-based conductive thermoset matrix10.1016/j.compscitech.2015.06.016 ↗
15. Lightning damage suppression in a carbon fiber-reinforced polymer with a polyaniline-based conductive thermoset matrix10.1016/j.compscitech.2016.02.022 ↗
16. Improved electrical conductivity of NCF-reinforced CFRP for higher damage resistance to lightning stirke10.1016/j.compositesa.2017.05.014 ↗
17. Coupled thermal-electrical analysis for carbon fiber/epoxy composites exposed to simulated lightning current10.1016/j.compositesa.2010.04.001 ↗
18. Nonlinear numerical modelling of lightning strike effect on composite panels with temperature dependent material properties10.1016/j.compstruct.2013.11.007 ↗
19. Coupled electrical–thermal–pyrolytic analysis of carbon fiber/epoxy composites subjected to lightning strike
20. Influencing factor analysis based on electrical–thermal–pyrolytic simulation of carbon fiber composites lightning damage10.1016/j.compstruct.2015.12.033 ↗
21. Naghipour P, Pineda EJ, Arnold S. Prediction of the Delamination Area of a Composite Panel Subjected to Lightning Strike: Effects of Temperature-Dependent Fracture Properties. In: American Society of Composited – 28th Technical Conference. Pennsylvania, September 2013.
22. Espinosa C, Montel T, Pons J M, Lachaud F, Soulas F. A numerical study of the pressure applied on CFRP panels during a lightning strike using a coupled electro-thermal-mechanical model. In: International Conference on Lightning & Static Electricity 2017. Nagoya, September 2017.
23. Rannou J, Huchette C, Hurmane A, Tholin F. An analysis of lightning direct effects on CFRP panels. Part II, the electro-thermo-mechanical simulation strategy. In: International Conference on Lightning & Static Electricity 2017. Nagoya, September 2017.
24. Direct effects of lightning on aircraft structure: analysis of the thermal, electrical and mechanical constraints
25. Ablation damage characteristic and residual strength prediction of carbon fiber/epoxy composite suffered from lightning strike10.1016/j.compstruct.2014.06.029 ↗
26. Ablation damage assessment of aircraft carbon fiber/epoxy composite and its protection structures suffered from lightning strike10.1016/j.compstruct.2016.03.005 ↗
27. Mingxin D, Xiu X, Xiaoyu F, Yanchao D. Study on the Electrical-Thermal Coupled Effect and Simulation Method of Lightning Strike on CFRP. In: International Conference on Lightning & Static Electricity 2017. Nagoya, September 2017.
28. SAE Committee report, AE4L-97-4, Aircraft Lightning Environment and Related Test Waveforms Standard, 1997.
29. Thermal response and ablation characteristics of carbon fiber reinforced composite with novel silicon containing polymer MSP10.1177/0021998302036002554 ↗
30. A model for the thermal response of polymer composites materials with experimental verification10.1177/002199838501900608 ↗
31. A mathematical model to predict the thermal response of decomposing, expanding polymer composites10.1177/002199838702100406 ↗
32. Abaqus theory manual: 32.5.1 Cohesive elements: overview, Dassault system simulia (CD-ROM). 2017.
33. Abaqus theory manual: 32.5.6 Defining the constitutive response of cohesive elements using a traction-separation description, Dassault system simulia (CD-ROM). 2017.
34. Yoshimura A, Okabe T, Yamada M, Ogasawara T, Tanabe Y. Damage simulation of CFRP laminates under high velocity projectile impact. In: 18th International Conference on Composite Materials. Jeju, Korea, August 2011.
35. Analysis and experiment of gas leakage through composite laminates for propellant tanks10.2514/2.1895 ↗
36. Morimoto T, Sugimoto S, Katoh H, Hara E, Yasuoka T, Iwahori Y, et al., JAXA Research and Development Memorandum. JAXA-RM-14-004. 2015.