A novel specific requirements for materials used in reinforced concrete composites subjected to dynamic loads
Source abstract
Abstract
Abstract The use of materials with appropriate parameters and properties is required for the construction of dynamically loaded structures. Reinforced concrete composites (RCC) belong to the most essential, and widely used construction materials for dynamic load-bearing structures. Therefore, the main problems related to the design of dynamically loaded RCC are analysed in this paper, and the most important characteristics of materials used for the construction of reinforced concrete structures subjected to dynamic loads are described. As a result of the conducted analysis, it was found that the concrete mix should have a low water/binder ratio. It is prepared using broken aggregates from igneous rocks and binders modified with mineral additives and chemical admixtures. This ensures a high degree of homogenisation of the composite, smaller internal microcracks and greater resistance to dynamic loads. Furthermore, the reinforcement of composites should contain a large amount of structural reinforcement to prevent shrinkage cracks.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Innovations in Concrete and Construction Materials · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. Assessment of FRP pultruded elements under static and dynamic loads10.1016/j.compstruct.2017.09.107 ↗
2. Experimental and finite element analysis of a very large pultruded FRP structure subjected to free vibration10.1016/j.compstruct.2011.10.003 ↗
3. Damage mechanisms assessment of hybrid flax-glass fibre composites using acoustic emission10.1016/j.compstruct.2017.04.044 ↗
4. Experimental validation of concrete crack identification and location with acoustic emission method10.1016/j.acme.2012.03.004 ↗
5. Macroscopic evaluation of fracture processes in fly ash concrete10.4028/www.scientific.net/SSP.254.188 ↗
6. Measurement of fracture mechanics parameters of concrete containing fly ash thanks to use of Digital Image Correlation (DIC) method10.1016/j.measurement.2018.11.032 ↗
7. Mixed mode fracture10.1016/j.tafmec.2017.05.012 ↗
8. Strain-based criteria for mixed-mode fracture of polycrystalline graphite10.1016/j.engfracmech.2016.02.011 ↗
9. Experimental and theoretical fracture toughness investigation of PUR foams under mixed mode I+III loading10.1016/j.polymertesting.2018.02.015 ↗
10. A failure analysis of concrete composites incorporating fly ash during torsional loading10.1016/j.compstruct.2017.05.073 ↗
11. Determination of fracture toughness in concretes containing siliceous fly ash during mode III loading10.12989/sem.2017.62.1.001 ↗
12. Effect of fly ash addition on the fracture toughness of plain concrete at third model of fracture10.3846/13923730.2016.1217923 ↗
13. Cryogenic and high temperature compressive properties of metal foam matrix composites10.1016/j.compstruct.2018.11.006 ↗
14. The temperature effect on the axial quasi-static compressive behavior of ex-situ aluminum foam-filled tubes10.1016/j.compstruct.2017.08.034 ↗
15. A study of mode III fracture toughness in young and mature concrete with fly ash additive10.4028/www.scientific.net/SSP.254.120 ↗
16. 2002
17. Meyer · 1998
18. Dynamic modelling of 1–3 piezoelectric composite hydrophone and its experimental validation10.1016/j.compstruct.2016.05.018 ↗
19. Dynamic strength criterion for concrete10.1061/(ASCE)0733-9399(2004)130:12(1428) ↗
20. Geometrically nonlinear vibrations of slender meso-periodic beams. The tolerance modelling approach10.1016/j.compstruct.2015.10.004 ↗
21. Cork composites for the absorption of impact energy10.1016/j.compstruct.2012.07.015 ↗
22. Failure mechanisms of CFRP-wrapped prorective concrete arches under static and blast loadings: experimental research10.1016/j.compstruct.2018.05.063 ↗
23. Crane runways – fatigue evaluation of crane rail welds using local concepts10.1016/j.ijfatigue.2011.02.010 ↗
24. Crane load modelling10.1016/0167-4730(95)00011-9 ↗
25. Research on fatigue performance of CFRP reinforced steel crane girder10.1016/j.compstruct.2016.07.066 ↗
26. Dynamic analysis of machine foundation
27. Bhatia · 2011
28. Analysis and design of machine foundation
29. Structural evaluation of all-GFRP cable-stayed footbridge after 20 years of service life
30. Comparison of steel-concrete composite column and steel column10.1016/j.compstruct.2017.11.055 ↗
31. Rapid repair and replacement of earthquake-damaged concrete columns using plastic hinge relocation10.1016/j.compstruct.2017.08.051 ↗
32. An engineering approach to predict mixed mode fracture of PUR foams based on ASED and micromechanical modelling10.1016/j.tafmec.2017.06.008 ↗
33. Neville · 2011
34. Identification of stiffness distribution of fatigue loaded polymer concrete through vibration measurements10.1016/j.compstruct.2015.09.026 ↗
35. Evaluation of morphology and size of cracks of the Interfacial Transition Zone (ITZ) in concrete containing fly ash (FA)10.1016/j.jhazmat.2018.06.016 ↗
36. EN 1992–1–1 (2004): Eurocode 2: Design of concrete structures – Part 1–1: General rules and rules for buildings.
37. Lipinski J. Fundamenty pod maszyny. [Foundations for machines]. Warsaw: Arkady; 1988.
38. Smart crack control in concrete through use of phase change materials (PCMs): a review10.3390/ma11050654 ↗
39. Carbonation-induced corrosion initiation probability of rebars in concrete with/without finishing materials10.3390/su10103814 ↗
40. Fracture toughness at shear (mode II) of concretes made of natural and broken aggregates10.1533/9780857093080.537 ↗
41. Experimental and numerical investigation on I-II mixed mode fracture of concrete based on the Monte Carlo random aggregate distribution10.1016/j.conbuildmat.2018.09.195 ↗
42. Influence of cement properties on new generation superplasticizers performance10.1016/j.conbuildmat.2012.04.070 ↗
43. Improvement of fracture toughness of green concrete as a result of addition of coal fly ash. Characterization of fly ash microstructure10.1016/j.matchar.2017.11.008 ↗
44. The fracture toughness the of KIIIc concretes with fly ash (FA) additive10.1016/j.conbuildmat.2017.03.137 ↗
45. Influence of mineral additions on the expansion of heat cured cement mortars
46. Effect of curing time on the fracture toughness of fly ash concrete composites10.1016/j.compstruct.2017.10.090 ↗
47. Experimental investigation and numerical modelling fracture processes in fly ash concrete at early age10.4028/www.scientific.net/SSP.188.158 ↗
48. Strength development of concrete with fly ash addition10.3846/13923730.2007.9636427 ↗
49. The influence of microcrack width on the mechanical parameters in concrete with the addition of fly ash: consideration of technological and economical benefits10.1016/j.conbuildmat.2018.08.157 ↗
50. The effect of waste mineral powders on the structure of air voids in low-strength air-entrained concrete floor screeds
51. Effect of fly ash particle size on thermal and mechanical properties of fly ash-cement composites10.1016/j.tsep.2018.07.014 ↗
52. An assessment of microcracks in the Interfacial Transition Zone of durable concrete composites with fly ash additives10.1016/j.compstruct.2018.05.144 ↗