Effect of the platelet size on the fracturing behavior and size effect of discontinuous fiber composite structures
Source abstract
Abstract
Abstract This study investigates the mode I intra-laminar fracture and size effect in Discontinuous Fiber Composites (DFCs). Towards this goal, the results of fracture tests on geometrically-scaled Single Edge Notch Tension (SENT) specimens are presented and critically discussed for three platelet sizes. The results clearly show a decrease in nominal strength as the specimen size increases. It is found that, when the specimen is sufficiently large, the structural strength scales according to Linear Elastic Fracture Mechanics (LEFM) and the failure occurs in a very brittle way. In contrast, small specimens exhibit a more pronounced pseudo-ductility with a limited scaling effect and a significant deviation from LEFM. To characterize the fracture energy and the effective length of the fracture process zone, an approach combining equivalent fracture mechanics and stochastic finite element modeling is proposed. The model accounts for the complex random mesostructure of the material by modeling the platelets explicitly. Thanks to this theoretical framework, the mode I fracture energy of DFCs is estimated for the first time and it is shown to depend significantly on the platelet size. In particular, the fracture energy is shown to increase linearly with the platelet size in the range investigated in this work. Another importance of this work is that, compared to traditional unidirectional composites, DFC structures exhibit higher pseudo-ductility and their strength is, by far, less sensitive to notches, defects and cracks. This aspect can be used advantageously in structural design only upon the condition that proper certification guidelines acknowledging the more pronounced quasibrittleness of DFCs is formulated. The size effect analysis presented in this work represents a first step in this direction as it allows the assessment of the severity of a defect or notch in DFCs.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Composite Material Mechanics · Numerical methods in engineering
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. On the mechanical response of randomly reinforced chopped-fibers composites: data and model10.1016/j.compscitech.2006.01.019 ↗
2. Characterization of prepreg-based discontinuous carbon fiber/epoxy systems10.1177/0731684408088883 ↗
3. Modulus measurement for prepreg-based discontinuous carbon fiber/epoxy systems10.1177/0021998309343028 ↗
4. Tensile and compressive properties of chopped carbon fiber tapes reinforced thermoplastics with different fiber lengths and molding pressures10.1016/j.compositesa.2016.05.005 ↗
5. Experimental characterization of the tensile failure mode of ultra-thin chopped carbon fiber tape-reinforced thermoplastics10.1177/0731684416651134 ↗
6. Characterization of mechanical properties of randomly oriented strand thermoplastic composites10.1177/0021998315613129 ↗
7. Quantum Composites. Bay City, MI.https://www.quantumcomposites.com/applications/lamborghini.
8. Boursier B. New possibilities with HexMC, a high performance moulding compound. In: SAMPE Conference. Paris, France; 27–29 March 2001.
9. Moore S. SMC adopted for rear door frame of Toyota’s new Prius PHV, Plastics Today; 3 April 2017.https://www.plasticstoday.com/automotive-and-mobility/smc-adopted-rear-door-frame-toyota-s-new-prius-phv/163725208056557.
10. Boeing 787 features composite window frames. Reinf Plast 2007;51(3):4.10.1016/S0034-3617(07)70095-4 ↗
11. Feraboli P, Gasco F, Wade B, Maier S, Kwan R, Masini A, et al. Lamborghini “Forged Composite” technology for the suspension arms of the sesto elemento. In: ASC 26rd Annual Technical Conference. Montreal, Quebec, CA; 26-28 Sept 2011.
12. Military OEM makes the switch from sandwich construction to compression molding to optimize composite aerospace part
13. Reuse and upcycling of aerospace prepreg scrap and waste10.1016/j.repl.2014.12.070 ↗
14. Optimization of mesostructures and mechanical properties of composite oriented strand board from reused prepreg10.1016/j.compstruct.2017.05.002 ↗
15. Interlaminar shear behaviour of hybrid fibre architectures of randomly oriented strands combined with laminate groups10.1016/j.compstruct.2017.06.002 ↗
16. The laminate approximation for randomly oriented fibrous composites10.1177/002199836900300416 ↗
17. Micro-CT analysis of the orientation unevenness in randomly chopped strand composites in relation to the strand length10.1016/j.compstruct.2018.09.002 ↗
18. Fiber orientation measurement from mesoscale CT scans of prepreg platelet molded composites10.1016/j.compositesa.2018.08.024 ↗
19. Simulation of prepreg platelet compression molding: method and orientation validation
20. Sommer DE, Favaloro AJ, Pipes RB. Prepreg platelet morphology and scale effects on molding processability. In: ASC 32nd Technical Conference, West Lafayette, IN; 22–25 Oct 2017.10.12783/asc2017/15368 ↗
21. Structure-property relationship for a prepreg platelet molded composite with engineered meso-morphology10.1016/j.compstruct.2018.11.058 ↗
22. Uniaxial strength of a composite array of overlaid and aligned prepreg platelets10.1016/j.compositesa.2018.02.032 ↗
23. Modelling of mechanical properties of randomly oriented strand thermoplastic composites10.1177/0021998316654748 ↗
24. Size effect in blunt fracture: concrete, rock, metal10.1061/(ASCE)0733-9399(1984)110:4(518) ↗
25. Determination of fracture energy, process zone length and brittleness number from size effect, with application to rock and concrete10.1007/BF00047063 ↗
26. Size effect and fracture characteristics of composite laminates10.1115/1.2806812 ↗
27. Bažant · 1998
28. Experimental and numerical investigation of intra-laminar size effect in textile composites10.1016/j.compscitech.2016.08.021 ↗
29. Failure behavior and scaling of graphene nanocomposites10.1016/j.compstruct.2017.06.013 ↗
30. Study of the fracturing behavior of thermoset polymer nanocomposites via cohesive zone modeling10.1016/j.compstruct.2019.03.092 ↗
31. Strength and cohesive behavior of thermoset polymers at the microscale: a size-effect study10.1016/j.engfracmech.2019.03.033 ↗
32. Mode I and II interlaminar fracture in laminated composites: a size effect study
33. Size effect analysis for the characterization of marcellus shale quasi-brittle fracture properties
34. Ko S, Chan K, Hawkins R, Jayaram R, Lynch C, El Mamoune R, et al. Characterization and computational modeling of the fracture behavior in discontinuous fiber composite structures. In: SAMPE Conference, Long Beach, CA; 21–24 May 2018.10.12783/asc33/26079 ↗
35. Ko S, Chan K, Hawkins R, Jayaram R, Lynch C, El Mamoune R, et al. Experimental and numerical characterization of the intra-laminar fracturing behavior in discontinuous fiber composite structures. In: ASC 33rd Annual technical conference. Seattle, WA; 24–26 Sept 2018.10.12783/asc33/26079 ↗
36. Numerical modeling and analysis for axial compressive crushing of randomly oriented thermoplastic composite tubes based on the out-of-plane damage mechanism10.1016/j.compstruct.2017.08.104 ↗
37. Direct testing of gradual postpeak softening of fracture specimens of fiber composites stabilized by enhanced grip stiffness and mass10.1115/1.4034312 ↗
38. The effect of surface stresses on the critical debonding stress around nanoparticles10.1007/s10704-011-9634-6 ↗
39. Nanoparticle debonding strength: a comprehensive study on interfacial effects10.1016/j.ijsolstr.2013.05.024 ↗
40. Heterogeneity of discontinuous carbon fibre composites: damage initiation captured by digital image correlation10.1016/j.compositesa.2014.10.014 ↗
41. GOM. Braunschweig, Germany. https://www.gom.com.
42. Bažant · 1991
43. Notched behavior of prepreg-based discontinuous carbon fiber/epoxy systems10.1016/j.compositesa.2008.12.012 ↗
44. Notched behaviour of discontinuous carbon fibre composites: comparison with quasi-isotropic non-crimp fabric10.1016/j.compositesa.2010.12.001 ↗
45. Irwin · 1958 · vol. 6
46. Stochastic laminate analogy for simulating the variability in modulus of discontinuous composite materials10.1016/j.compositesa.2010.01.003 ↗
47. Harban · 2017
48. Dassault Systemes ABAQUS. ‘ABAQUS Documentation’. Providence, RI: 2016.
49. A path independent integral and the approximate analysis of strain concentrations by notches and cracks10.1115/1.3601206 ↗
50. All modes fracture toughness of two aluminium alloys10.1016/0013-7944(87)90014-2 ↗
51. LDF thermoplastic composite technology10.1177/089270579100400302 ↗
52. Effect of the thickness on the fracturing behavior of discontinuous fiber composite structures10.1016/j.compositesa.2019.105520 ↗