journal article·2019-12

Enhanced comprehensive performance of bonding interface between CFRP and steel by a novel film adhesive

Lu Ke, Chuanxi Li, Nanhai Luo, Jun He, Yang Jiao, Yongming Liu

Publisher page

Abstract

Abstract A novel film adhesive was proposed to bond carbon fiber reinforced polymer (CFRP) laminas to steel substrates, and experimental validations for improved comprehensive bond performances are presented. This film adhesive was shown to possess excellent high-temperature resistance via dynamic mechanical analysis (DMA). A series of CFRP/steel double-lap joints (DLJs) with different bond lengths were experimentally studied, focusing on the failure modes, effective bond length, bond-slip relationship, and bond strength. The results show that the film-adhesive bonded joints fail in the mode of CFRP delamination, which indicates a stronger interfacial bond between the adhesive layer and adherends than the intra-laminar strength of CFRPs. The bonding interface has an effective bond length of approximately 65 mm, beyond which no increase of ultimate load can be achieved with the increase of bond length. The bond-slip relationship of the film-adhesive bonding interface exhibits a trapezoidal (ductile) shape, which is significantly different from the triangular (brittle) shapes for most paste-adhesive interfaces. Superior strength, ductility, and high-temperature resistance of the bonding interfaces in CFRP/steel composites are achieved due to the use of this film adhesive. The proposed study offers an alternative solution to an enhanced comprehensive property of the bonding interface in CFRP/steel composites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical Behavior of Composites · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. Effect of dynamic loading and environmental conditions on the bond between CFRP and steel: state-of-the-art review10.1061/(ASCE)CC.1943-5614.0000419 ↗
2. Strengthening of steel structures with fiber-reinforced polymer composites10.1016/j.jcsr.2012.06.011 ↗
3. Bond behaviors of FRP-to-concrete interface under the control of a novel end-anchorage system10.1016/j.compstruct.2017.02.056 ↗
4. Development of bond strength model for CFRP-to-concrete joints at high temperatures10.1016/j.compositesb.2016.03.088 ↗
5. Developments in the durability of FRP-concrete bond10.1016/j.conbuildmat.2014.12.106 ↗
6. Fire behaviour of FRP-strengthened reinforced concrete structural elements: a state-of-the-art review10.1016/j.compositesb.2015.05.045 ↗
7. Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: state of the art10.1016/j.compositesb.2015.07.014 ↗
8. A review on steel/CFRP strengthening systems focusing environmental performance10.1016/j.conbuildmat.2013.04.049 ↗
9. Characterization of model uncertainty of adhesively bonded CFRP-to-steel joints10.1016/j.compstruct.2019.02.045 ↗
10. Bond characteristics of CFRP-to-steel joints10.1016/j.jcsr.2017.08.001 ↗
11. Xia · 2005 · 411
12. Experimental study on CFRP-to-steel bonded interfaces10.1016/j.compositesb.2012.01.024 ↗
13. Analytical and experimental investigation on bond behavior of CFRP-to-stainless steel interface10.1016/j.compstruct.2019.01.007 ↗
14. Effect of alternating load on the residual strength of environmentally aged adhesively bonded CFRP-aluminum alloy joints10.1016/j.compositesb.2018.12.070 ↗
15. Bond behavior of CFRP-steel double-lap joints exposed to marine atmosphere and fatigue loading10.1016/j.engstruct.2018.08.012 ↗
16. Bond behavior of FRP carbon plates externally bonded over steel and concrete elements: experimental outcomes and numerical investigations10.1016/j.compositesb.2016.02.033 ↗
17. Bond-slip behavior of fiber reinforced polymer strips-steel interface10.1016/j.conbuildmat.2017.08.062 ↗
18. Effect of CFRP properties, on the bond characteristics between steel and CFRP laminate under quasi-static loading10.1016/j.conbuildmat.2015.08.130 ↗
19. Hart-Smith LJ. Adhesive-bonded double-lap joints. NASA contract report, 1973.
20. Effects of mechanical properties of adhesive and CFRP on the bond behavior in CFRP-strengthened steel structures10.1016/j.compstruct.2018.12.020 ↗
21. Behavior of prestressed CFRP plates bonded to steel substrate: Numerical modeling and experimental validation10.1016/j.compstruct.2018.09.023 ↗
22. The bond behaviour of CFRP-to-steel bonded joints with varying bond properties at elevated temperatures10.1016/j.engstruct.2018.10.044 ↗
23. Bond characteristics between ultra high modulus CFRP laminates and steel10.1016/j.tws.2011.10.010 ↗
24. Bond-slip models for CFRP plates externally bonded to steel substrates10.1016/j.compstruct.2017.10.033 ↗
25. Bond–slip models for double strap joints strengthened by CFRP10.1016/j.compstruct.2009.09.042 ↗
26. Derivation of the bond–slip characteristics for FRP plated steel members10.1016/j.jcsr.2010.03.003 ↗
27. Teng · 2011 · 865
28. Experimental study on bond behavior between CFRP plates and steel substrates using digital image correlation10.1061/(ASCE)CC.1943-5614.0000701 ↗
29. Behavior of CFRP laminates bonded to a steel substrate using a ductile adhesive10.1061/(ASCE)CC.1943-5614.0000439 ↗
30. Debonding of CFRP-to-steel joints with CFRP delamination10.1016/j.compstruct.2016.05.100 ↗
31. Experimental evaluation of bonding between CFRP laminates and different structural materials10.1061/(ASCE)CC.1943-5614.0000631 ↗
32. Displacement rate and structural effects on Poisson ratio of a ductile structural adhesive in tension and compression10.1016/j.ijadhadh.2017.06.008 ↗
33. Shear properties of polyurethane ductile adhesive at low temperatures under high strain rate conditions10.1016/j.compositesb.2018.08.060 ↗
34. Modelling load transfer and mixed-mode fracture of ductile adhesive composite joints10.1016/j.ijadhadh.2018.01.013 ↗
35. Durability of an epoxy adhesive used in civil structural applications10.1016/j.conbuildmat.2017.11.168 ↗
36. Failure of CFRP-to-steel double strap joint bonded using carbon nanotubes modified epoxy adhesive at moderately elevated temperatures10.1016/j.compositesb.2016.03.042 ↗
37. Effect of continuous high temperature exposure on the adhesive strength of epoxy adhesive, CFRP and adhesively bonded CFRP-aluminum alloy joints10.1016/j.compositesb.2018.07.059 ↗
38. Environment-assisted degradation of the bond between steel and carbon-fiber-reinforced polymer10.1061/(ASCE)MT.1943-5533.0000951 ↗
39. ASTM D638-14. Standard test method for tensile properties of plastics; 2014.
40. ASTM D3528-96. Standard test method for strength properties of double lap shear adhesive joints by tension loading; 2016.
41. Bond behaviour between CFRP laminates and steel members under different loading rates10.1016/j.compstruct.2016.04.002 ↗
42. On factors affecting CFRP-steel bonded joints10.1016/j.conbuildmat.2019.06.220 ↗
43. Mechanical characterization of steel/CFRP double strap joints at elevated temperatures10.1016/j.compstruct.2011.01.010 ↗
44. Time–temperature dependence of thermomechanical recovery of cold-curing structural adhesives10.1016/j.ijadhadh.2012.02.005 ↗
45. Glass transition evaluation of commercially available epoxy resins used for civil engineering applications10.1016/j.compositesb.2015.03.053 ↗
46. Standard test method for assignment of the glass transition temperature by dynamic mechanical analysis 1.
47. Effect of fabrication method on thermo-mechanical properties of an epoxy composite10.1080/00218464.2013.842170 ↗
48. Reinforcing brittle and ductile epoxy matrices using carbon nanotubes masterbatch10.1016/j.compositesa.2014.02.016 ↗
49. Rehabilitation of timber structures – preparation and environmental service condition effects on the bulk performance of epoxy adhesives10.1016/j.conbuildmat.2011.03.050 ↗
50. Effects of low and high temperatures on tensile behavior of adhesively-bonded GFRP joints10.1016/j.compstruct.2009.11.028 ↗
51. Epoxy/silica nanocomposites: nanoparticle-induced cure kinetics and microstructure10.1002/marc.200600588 ↗
52. Magnetic epoxy resin nanocomposites reinforced with core−shell structured Fe@FeO nanoparticles: fabrication and property analysis10.1021/am100361h ↗
53. Evaluation of shear stress and slip relationship of composite lap joints10.1016/j.compstruct.2012.12.027 ↗
54. Experimental investigation of bond characteristics between CFRP fabrics and steel plate joints under impact tensile loads10.1016/j.compstruct.2011.08.018 ↗
55. Effect of carbon nanotube modified epoxy adhesive on CFRP-to-steel interface10.1016/j.compositesb.2015.03.063 ↗
56. Analysis of adhesive joints used to bond FRP laminates to steel members – a numerical and experimental study10.1016/j.conbuildmat.2010.04.032 ↗
57. Bond-slip model for FRP-to-concrete bonded joints under external compression10.1016/j.compositesb.2015.06.004 ↗
58. An integrated constitutive model for tensile failure analysis and overlap design of adhesive-bonded composite joints10.1016/j.compstruct.2019.110986 ↗
59. Huntsman Corporation. Advanced Materials Technical Datasheet–Araldite® 2015 Adhesive. Huntsman Corporation; 2015.
60. The effects of curing temperature on fracture energy and cohesive parameters for the adhesive Araldite 201510.1080/01694243.2017.1410080 ↗