X-ray tomography and numerical study on low-velocity impact damages of three-dimensional angle-interlock woven composites
Source abstract
Abstract
Abstract Three-dimensional (3D) angle-interlock woven composites reinforced with carbon fibers were tested under low velocity impact with energies of 3 J, 9 J, 15 J, 30 J. Inner damages were photographed with Micro-CT (computer tomography). It is revealed that the damage mechanisms of samples with 3 J impact energy are matrix cracks and fiber tow splitting, while interfacial damage occurs when the impact energy reaches 9 J. The delamination, fiber tow crushing and fiber breakage will appear when the impact energy raises to a higher value such as 15 J or 30 J. Finite element analyses (FEA) results show that weft yarn is the main load carrier, and yarns at the bottom of the composite bear greater impact load than the top yarns. Both the damage morphology of experimental and numerical results demonstrate that resin cracks appear along the weft yarn on the top of the composite, and exhibit a divergence centered on the impact location at the back surface. Farther from the impact center, the delamination and matrix cracks propagate from the bottom surface to the top surface along the paths of weft yarns and epoxy resins. It is recommended that the high modulus weft yarns should be used to provide the high impact resistance performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Fiber-reinforced polymer composites · Textile materials and evaluations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Mechanical performance of composites based on various three-dimensional woven-fibre preforms10.1016/0266-3538(95)00135-2 ↗
2. Drechsler K. 3-D textile reinforced composites for the transportation industry; 1999; pp. 43–66.10.1533/9781845691929.43 ↗
3. On the mechanical response of 2D plain woven and 3D angle-interlock fabrics10.1016/j.compositesb.2017.03.011 ↗
4. Mechanical characterization of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites10.1016/j.polymertesting.2016.08.024 ↗
5. Mechanical behavior of 3D woven composites10.1016/j.matdes.2014.11.020 ↗
6. Low velocity impact response of 3D angle-interlock Kevlar/basalt reinforced polypropylene composites10.1016/j.matdes.2016.05.075 ↗
7. Mechanisms and characterization of impact damage in 2D and 3D woven fiber-reinforced composites10.1016/j.compositesa.2017.07.004 ↗
8. In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading10.1016/j.compscitech.2011.11.032 ↗
9. The impact resistance of composite materials—a review10.1016/0010-4361(91)90549-V ↗
10. Delamination threshold loads for low velocity impact on composite laminates10.1016/S1359-835X(00)00061-0 ↗
11. Impact resistance and damage characteristics of composite laminates10.1016/S0263-8223(03)00114-4 ↗
12. Review of low-velocity impact properties of composite materials10.1016/1359-835X(96)00074-7 ↗
13. Baker · 1996
14. Ultrasonic evaluation of matrix damage in impacted composite laminates10.1016/S1359-8368(99)00067-0 ↗
15. Chang RK, Shinwari M, Leonzio M, Wu LS, Pang J, Hussain MA. Thermal tomography characterization and pulse-phase thermography of impact damage in CFRP, or why end users are still reluctant about practical use of transient IR thermography, Thermosense XX; 1998.
16. X-ray computed microtomography of internal damage in fiber reinforced polymer matrix composites10.1016/j.compscitech.2005.05.014 ↗
17. X-ray radiography and micro-computed tomography examination of damage characteristics in stitched composites subjected to impact loading10.1016/j.compositesb.2011.01.011 ↗
18. Impact properties of weft knitted fabric reinforced composites10.1016/S0266-3538(02)00057-X ↗
19. Paipetis · 2010 · 1
20. Detection of impact damage in CFRP laminates by means of electrical potential techniques10.1016/j.compscitech.2006.07.033 ↗
21. Impact damage in GFRP: New insights with infrared thermography10.1016/j.compositesa.2010.09.002 ↗
22. 3D composite reinforcement meso F.E. analyses based on X-ray computed tomography10.1016/j.compstruct.2015.07.005 ↗
23. A comparison of multi-scale 3D X-ray tomographic inspection techniques for assessing carbon fibre composite impact damage10.1016/j.compscitech.2012.12.006 ↗
24. Computed tomography-based reconstruction and finite element modelling of honeycomb sandwiches under low-velocity impacts
25. Braided textile composites for sports protection: Energy absorption and delamination in impact modelling10.1016/j.matdes.2017.10.006 ↗
26. Drop-weight impact of plain-woven hybrid glass–graphite/toughened epoxy composites10.1016/j.compositesa.2009.04.028 ↗
27. The quantification of impact damage distribution in composite laminates by analysis of X-ray computed tomograms10.1016/j.compscitech.2017.08.034 ↗
28. Damage in woven CFRP laminates subjected to low velocity impacts
29. Multi-scale analyses of 3D woven composite based on periodicity boundary conditions10.1177/0021998306069891 ↗
30. Experimental and numerical investigation of the transverse impact damage and deformation of 3-D circular braided composite tubes from meso-structure approach10.1016/j.compositesb.2015.10.019 ↗
31. High strain rate compressive behaviors and adiabatic shear band localization of 3-D carbon/epoxy angle-interlock woven composites at different loading directions10.1016/j.compstruct.2018.12.037 ↗
32. On selection of repeated unit cell model and application of unified periodic boundary conditions in micro-mechanical analysis of composites10.1016/j.ijsolstr.2005.03.055 ↗
33. Boundary conditions for unit cells from periodic microstructures and their implications10.1016/j.compscitech.2007.03.035 ↗
34. Suquet · 1987 · 272
35. Nonlinear viscoelastic multi-scale repetitive unit cell model of 3D woven composites with damage evolution10.1016/j.ijsolstr.2013.06.020 ↗
36. Barely visible impact damage in scaled composite laminates: experiments and numerical simulations10.1016/j.ijimpeng.2017.06.008 ↗
37. Ballistic impact damages of 3-D angle-interlock woven composites based on high strain rate constitutive equation of fiber tows10.1016/j.ijimpeng.2013.02.003 ↗
38. Simulating low-velocity impact induced delamination in composites by a quasi-static load model with surface-based cohesive contact10.1016/j.compstruct.2015.01.050 ↗
39. A methodology to simulate low velocity impact and compression after impact in large composite stiffened panels10.1016/j.compstruct.2018.07.081 ↗
40. Compressive response of Z-pinned woven glass fiber textile composite laminates: modeling and computations10.1016/j.compscitech.2009.01.008 ↗
41. A self-consistent mechanics of composite materials10.1016/0022-5096(65)90010-4 ↗
42. Multi-scale structure modeling of damage behaviors of 3D orthogonal woven composite materials subject to quasi-static and high strain rate compressions10.1016/j.mechmat.2015.11.012 ↗
43. A comprehensive failure model for crashworthiness simulation of aluminium extrusions10.1533/ijcr.2004.0289 ↗
44. X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact10.1016/j.compositesa.2012.09.017 ↗