The numerical and experimental investigation on low-velocity impact response of composite panels: Effect of fabric architecture
Source abstract
Abstract
Abstract The aim of this study is to characterize and assess the effect of fabric structure on the damage resistance subjected to low velocity impact. Composite panels reinforced by layered unidirectional (LU), layered woven (LW) and 3D orthogonal woven (OW) fabric were prepared respectively and the impact tests were carried out on a low-velocity testbench. Finite element models at yarn-level were established to numerically investigate the material deformation and failure mechanism. The impact tests showed that the OW composite possessed better impact resistance with respect to impact-induced deformation and inelastic energy absorption. The roles of the z-binder have also been identified through comparison of impacted morphology and numerical results. The z-binder serves as cracking trigger due to the weak debonding with resin pocket around it and its zig-zag configuration impedes the growth of delamination by damage deflection. Therefore, the discontinuous resin damage in 3D composite allows the enhancement of impact resistance instead of delamination failure in the 2D panel. In addition, the in-plane interlacement of woven fabric causes that primary yarn breaks in the high stress region and forms a circle damage area, whereas the penetrating cracking along the fiber orientation of superficial layer is induced in the unidirectional composite.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Mechanical Behavior of Composites · Textile materials and evaluations · Structural Analysis of Composite Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. Review of applications for advanced three-dimensional fibre textile composites10.1016/S1359-835X(99)00034-2 ↗
2. Detecting barely visible impact damage detection on aircraft composites structures10.1016/j.compstruct.2009.04.014 ↗
3. Impact damage prediction in carbon composite structures10.1016/0734-743X(94)00039-Y ↗
4. The effect of stacking sequence on impact damage in a carbon fibre/epoxy composite10.1016/0010-4361(95)91384-H ↗
5. Low-velocity impact damage on dispersed stacking sequence laminates. Part I: experiments10.1016/j.compscitech.2009.02.009 ↗
6. Low-velocity impact damage on dispersed stacking sequence laminates. Part II: numerical simulations10.1016/j.compscitech.2009.02.015 ↗
7. Semi-continuous strategy for the modelling of damage mechanisms in unidirectional composites under low velocity impacts10.1016/j.compositesb.2017.07.014 ↗
8. Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading10.1016/j.ijimpeng.2007.02.009 ↗
9. Further validation of the Jain and Mai models for interlaminar fracture of stitched composites10.1016/S0266-3538(99)00027-5 ↗
10. Effect of stitch density and stitch thread thickness on low-velocity impact damage of stitched composites10.1016/j.compositesa.2010.09.007 ↗
11. Impact damage resistance, response, and mechanisms of laminated composites reinforced by through-thickness stitching10.1177/1056789510397070 ↗
12. DCB test simulation of stitched CFRP laminates using interlaminar tension test results10.1016/j.compscitech.2008.12.018 ↗
13. The effect of stitch distribution on Mode I delamination toughness of stitched laminated composites-experimental results and FEA simulation10.1016/j.compscitech.2006.06.002 ↗
14. Damage response of stitched cross-ply laminates under impact loadings10.1016/j.engfracmech.2006.05.012 ↗
15. Review of z-pinned composite laminates10.1016/j.compositesa.2007.08.016 ↗
16. Experimental investigation of three-dimensional woven composites10.1016/j.compositesa.2015.03.011 ↗
17. Effect of weaving damage on the tensile properties of three-dimensional woven composites10.1016/S0263-8223(02)00108-3 ↗
18. Characterising the loading direction sensitivity of 3D woven composites: effect of z-binder architecture10.1016/j.compositesa.2016.08.028 ↗
19. In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading10.1016/j.compscitech.2011.11.032 ↗
20. Three-dimensional woven carbon fibre polymer composite beams and plates under ballistic impact10.1016/j.compstruct.2017.10.091 ↗
21. Ballistic performance of hybrid 3D woven composites: experiments and simulations10.1016/j.compstruct.2015.03.021 ↗
22. Ballistic penetration of conically cylindrical steel projectile into 3D orthogonal woven composite: a finite element study at microstructure level10.1177/0021998310381150 ↗
23. Z-fiber influence on high speed penetration of 3D orthogonal woven fiber composites10.1016/j.mechmat.2013.06.008 ↗
24. Low velocity impact properties of 3D woven basalt/aramid hybrid composites10.1016/j.compscitech.2007.06.016 ↗
25. Impact damage of 3D orthogonal woven composite circular plates10.1007/s10443-008-9050-x ↗
26. Experimental and numerical investigation of low energy/velocity impact damage generated in 3D woven composite with polymer matrix10.1016/j.compstruct.2016.09.077 ↗
27. High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts10.1016/j.ijmecsci.2018.02.044 ↗
28. Dynamic response of orthogonal three-dimensional woven carbon composite beams under soft impact10.1115/1.4031455 ↗
29. X-ray microtomography analysis of the damage micromechanisms in 3D woven composites under low-velocity impact10.1016/j.compositesa.2012.09.017 ↗
30. Impact behaviour of composites with different fibre architecture10.1243/09544100JAERO451 ↗
31. Low-velocity impact damage progression in woven E-glass composite systems10.1016/j.compositesa.2004.07.008 ↗
32. Mechanisms and characterization of impact damage in 2D and 3D woven fiber-reinforced composites10.1016/j.compositesa.2017.07.004 ↗
33. Experimental and numerical analyses of the mechanical behaviors of three-dimensional orthogonal woven composites under compressive loadings with different strain rates10.1177/1056789513505301 ↗
34. Failure criteria for unidirectional fiber composite10.1115/1.3153664 ↗
35. Progressive failure analysis of three-dimensional woven carbon composites in single-bolt, double-shear bearing10.1016/j.compositesb.2015.08.082 ↗
36. Mechanical property and failure mechanism of 3D Carbon-Carbon braided composites bolted joints under unidirectional tensile loading
37. Multi-scale finite element analysis of 2.5D woven fabric composites under on-axis and off-axis tension10.1016/j.commatsci.2013.07.003 ↗