Numerical and experimental investigation of fitting tolerance effects on bearing strength of CFRP/Al single-lap blind riveted joints
Source abstract
Abstract
Abstract This paper deals with the effects of rivet-hole tolerance in CFRP/Al single-lap blind riveted joint by combining the experimental tests and numerical simulation approaches. The simulation model was established based on continuum damage mechanics incorporated with extended 3D failure criteria. Meanwhile, the exponential damage evolution rule of CFRP damage initiation and material stiffness degradation were applied. The inserting, locking and the corresponding tensile tests for rivet jointed with different clearances or interferences were conducted, and the corresponding simulation results were obtained and compared with experimental results. Scanning electron microscope (SEM) was used to analyze the CFRP damages during the rivet installation. X-ray scan technology was applied to observe failure forms of rivet joint after bearing tests. From the experimental and simulation results, although interference-fit joint can induce the material damages around the hole in insertion process, improved bearing strength for CFRP/Al single-lap blind riveted joint can be obtained comparing with clearance fit conditions. In addition, the evolution of CFRP damages during the rivet installation and failure forms of rivet joint under tensile loads were investigated.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · Advanced Welding Techniques Analysis · Metal Forming Simulation Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (39)
Show source-provided references
1. Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading10.1016/j.compositesb.2018.11.142 ↗
2. Recent developments on damage modeling and finite element analysis for composite laminates: A review10.1016/j.matdes.2010.03.031 ↗
3. Mechanics of mechanically fastened joints in polymer-matrix composite structures - A review10.1016/j.compscitech.2008.09.037 ↗
4. Mode I delamination mechanism analysis on CFRP interference-fit during the installation process10.1016/j.matdes.2016.11.063 ↗
5. Fatigue characteristics of the bolted joints for unidirectional composite laminates10.1016/j.compstruct.2004.10.013 ↗
6. Bolt-hole clearance effects and strength criteria in single-bolt,single-lap, composite bolted joints10.1016/S0266-3538(02)00088-X ↗
7. Tensile strength of open-hole, pin-loaded and multi-bolted single-lap joints in woven composite plates10.1016/j.matdes.2015.09.008 ↗
8. An experimental study on mechanical response of single-lap bolted CFRP composite interference-fit joints10.1016/j.compstruct.2018.05.016 ↗
9. Effects of transient dynamic loading on the energy absorption capability of composite bolted joints undergoing extended bearing failure10.1016/j.compstruct.2020.112476 ↗
10. Numerical and experimental investigation of fitting tolerance effects on damage and failure of CFRP/Ti double-lap single-bolt joints10.1016/j.ast.2018.04.042 ↗
11. Modeling of damage behavior of carbon fiber reinforced plastic composites interference bolting with sleeve10.1016/j.matdes.2020.108904 ↗
12. Damage behavior investigation of CFRP/Ti bolted joint during interference fit bolt dynamic installation progress10.1016/j.engfailanal.2020.104454 ↗
13. Effect of variations in the riveting process on the quality of riveted joints10.1007/s00170-007-1291-6 ↗
14. Experiment and numerical simulations of a slug rivet installation process based on different modeling methods10.1007/s00170-018-1990-1 ↗
15. An effective theoretical model for slug rivet assembly based on countersunk hole structure10.1007/s00170-018-2904-y ↗
16. Effect of rivet die structure on the quality of riveted aircraft structures using slug rivet10.1007/s00170-020-04963-1 ↗
17. Analysis of the mechanical performance of hybrid (SPR/bonded) single-lap joints between CFRP panels and aluminum blanks10.1016/j.ijadhadh.2012.10.008 ↗
18. Development of an end-to-end simulation process chain for prediction of self-piercing riveting joint geometry and strength10.1016/j.jmapro.2020.07.004 ↗
19. Towards joinability of thermal self-piercing riveting for AA7075-t6 aluminum alloy sheets under quasi-static loading conditions10.1016/j.ijmecsci.2020.105978 ↗
20. Mechanical behavior and failure of riveting joints in tensile and shear tests10.1007/s11223-015-9712-5 ↗
21. Use of blind rivets in sandwich panels-experimental investigation of static and quasi-cyclic loading10.3390/buildings10090155 ↗
22. Effect of process parameters on joint formation and mechanical performance in friction stir blind riveting of Aluminum alloys
23. FEA modelling of setting and mechanical testing of aluminum blind rivets10.1016/j.jmatprotec.2004.04.184 ↗
24. On the numerical prediction of the torque-to-turn-value of a blind rivet nut10.1007/s12289-019-01476-5 ↗
25. Improvement of fatigue life of riveted joints in helicopter airframes10.17531/ein.2021.1.17 ↗
26. Experimental investigation of the use of blind rivets in sandwich panels
27. Structural behavior of hybrid CFRP/steel bolted staggered joints10.1016/j.conbuildmat.2018.09.179 ↗
28. Field-testing and numerical simulation of vantage steel bridge
29. Composite patch configuration and prestress effect on SIFs for inclined cracks in steel plates10.1061/(ASCE)ST.1943-541X.0001727 ↗
30. Composite patch configuration and prestraining effect on crack tip deformation and plastic zone for inclined cracks10.1061/(ASCE)CC.1943-5614.0000655 ↗
31. Prediction of failure stages for double lap joints using finite element analysis and artificial neural networks10.1016/j.engfailanal.2019.01.042 ↗
32. Nonlinear progressive damage analysis of notched or bolted fibre-reinforced polymer (FRP) laminates based on a three-dimensional strain failure criterion10.3390/polym6040949 ↗
33. A progressive damage model for predicting damage evolution of laminated composites subjected to three-point bending10.1016/j.compscitech.2017.08.009 ↗
34. A unified numerical approach for the simulation of intra and inter laminar damage evolution in stiffened CFRP panels under compression10.1016/j.compositesb.2020.107931 ↗
35. Numerical simulation of compressive failure of carbon-fiber-reinforced plastic laminates with various hole shapes10.1080/09243046.2020.1783077 ↗
36. ABAQUS 6.14.. Analysis User’s Manual.
37. Modeling on bearing behavior and damage evolution of single-lap bolted composite interference-fit joints10.1016/j.compstruct.2019.01.044 ↗
38. Effect mechanisms of hygrothermal environments on failure of single-lap and double-lap cfrpaluminum bolted joints
39. Temperature effects on joint strength and failure modes of hybrid aluminum-composite countersunk bolted joints