Debonding detection of FRP strengthened concrete beams by using impedance measurements and an ensemble PSO adaptive spectral model
Source abstract
Abstract
An impedance-based midspan debonding identification method for RC beams strengthened with FRP strips is presented in this paper using piezoelectric ceramic (PZT) sensor?actuators. To reach this purpose, firstly, a two-dimensional electromechanical impedance model is proposed to predict the electrical admittance of the PZT transducer bonded to the FRP strips of an RC beam. Considering the impedance is measured in high frequencies, a spectral element model of the bonded-PZT?FRP strengthened beam is developed. This model, in conjunction with experimental measurements of PZT transducers, is used to present an updating methodology to quantitatively detect interfacial debonding of these kinds of structures. To improve the performance and accuracy of the detection algorithm in a challenging problem such as ours, the structural health monitoring approach is solved with an ensemble process based on particle of swarm. An adaptive mesh scheme has also been developed to increase the reliability in locating the area in which debonding initiates. Predictions carried out with experimental results have showed the effectiveness and potential of the proposed method to detect prematurely at its earliest stages a critical failure mode such as that due to midspan debonding of the FRP strip.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Health Monitoring Techniques · Ultrasonics and Acoustic Wave Propagation · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (43)
Show source-provided references
1. Concrete beams with externally bonded flexural FRPreinforcement:analytical investigation of debonding failure10.1016/S1359-8368(02)00139-7 ↗
2. Study of intermediate crack debonding in adhesively plated beams10.1061/(ASCE)1090-0268(2007)11:2(175) ↗
3. Finite-element modeling of intermediate crack debonding in FRP-plated RC beams10.1061/(ASCE)CC.1943-5614.0000157 ↗
4. Identification of intermediate debonding damage in FRP-plated RC beams based on multi-objective particle swarm optimization without updated baseline model10.1016/j.compositesb.2014.02.008 ↗
5. Comparison of acoustic emission activity in steel reinforced and FRP reinforced concrete beams10.1016/S0950-0618(00)00036-2 ↗
6. Characterization of debonding in FRP-strengthened masonry using the acoustic emission technique10.1016/j.engstruct.2014.01.050 ↗
7. Structural health monitoring using piezoelectric impedance measurements10.1098/rsta.2006.1934 ↗
8. Impedance-based structural health monitoring incorporating neural network technique for identification of damage type and severity10.1016/j.engstruct.2012.01.012 ↗
9. Experimental investigation of E/M impedance health monitoring of spot-welded structure joints10.1106/N0J5-6UJ2-WlGV-Q8MC ↗
10. Piezoelectric wafer embedded active sensors foraging aircraft structural health monitoring10.1177/147592170200100104 ↗
11. Impedance-based wireless debonding condition monitoring of CFRP laminated concrete structures10.1016/j.ndteint.2010.10.006 ↗
12. Identifying technology for structural damage based on the impedance analysis of piezoelectric sensor10.1016/j.conbuildmat.2010.06.004 ↗
13. Electro-mechanical impedance modeling of active material systems10.1088/0964-1726/5/2/006 ↗
14. An admittance function of active piezoelectric elements boded on a cracked beam10.1016/j.jsv.2006.05.032 ↗
15. An electromechanical impedance model of a cracked composite beam with adhesively bonded piezoelectric patches10.1016/j.jsv.2010.08.013 ↗
16. Delamination assessment of a laminated composite beam using distributed piezoelectric sensor/actuator10.1088/0964-1726/20/7/075011 ↗
17. Structural damage identification for thin plates using smart piezoelectric transducers10.1016/j.cma.2004.08.007 ↗
18. Damage detection on hollow cylinders by Electro-Mechanical Impedance method: Experiments and Finite element modelling10.1016/j.crme.2012.07.001 ↗
19. Doyle · 1997
20. Gopalakrishnan · 2008
21. A frequency–domain method of structural damage identification formulated from dynamic stiffness equation of motion10.1006/jsvi.2002.5058 ↗
22. Spectral element modelling for the beams treated with active constrained layer damping10.1016/S0020-7683(00)00360-7 ↗
23. Health monitoring of concrete structures strengthened with advanced composite materials using piezoelectric transducers10.1016/S1359-8368(01)00017-8 ↗
24. Disbond detection with piezoelectric wafer active sensors in RC structures strengthened with FRP composite overlays10.1007/s11803-003-0005-9 ↗
25. Numerical study of detection of disbond growth under a composite repair patch10.1088/0964-1726/12/4/314 ↗
26. Impedance-based wireless debonding condition monitoring of CFRP laminated concrete structures10.1016/j.ndteint.2010.10.006 ↗
27. Lee · 2009
28. A unified approach for the static and dynamic analyses of intermediate debonding in FRP-strengthened reinforced concrete beams10.1016/j.compstruct.2010.04.006 ↗
29. Coupled electro-mechanical analysis of adaptive material system-determination of the actuator power consumption and system energy transfer10.1177/1045389X9400500102 ↗
30. Sensitivity of PZT impedance sensors for damage detection of concrete structures10.3390/s8010327 ↗
31. Resonant frequency range utilized electro-mechanical impedance method for damage detection performance enhancement on composite structures10.1016/j.compstruct.2012.02.022 ↗
32. Allemang RJ, Brown DL. A correlation for modal vector analysis. In: Proceedings of first international modal analysis conference 1982. p.110–116.
33. Structural crack detection without updated baseline model by single and multiobjective optimization10.1016/j.ymssp.2008.06.010 ↗
34. Coello · 2002
35. Recent trends in evolutionary multiobjective optimization
36. Performance assessment of multicriteria damage identification genetic algorithms10.1016/j.compstruc.2008.07.003 ↗
37. Application of particle swarm optimization and genetic algorithms to multiobjective damage identification inverse problems with modelling errors10.1007/s11012-009-9264-5 ↗
38. Particle swarm optimization10.1109/ICNN.1995.488968 ↗
39. Particle swarm optimization: developments, applications and resources10.1109/CEC.2001.934374 ↗
40. Bagging Predictors10.1007/BF00058655 ↗
41. An empirical comparison of voting classification algorithms: bagging, boosting, and variants10.1023/A:1007515423169 ↗
42. An Ensemble Method based on Particle of Swarm for the Reduction of Noise, Outlier and Core Point
43. PI Ceramic Company, Product Information Catalog. Available online: .