journal article·2015-11Open access

Numerical analysis of the mechanical behaviour of reinforced thermoplastic pipes under combined external pressure and bending

Kuang Yu, E.V. Morozov, M.A. Ashraf, K. Shankar

Abstract

Abstract Reinforced thermoplastic pipes (RTPs) are promising design solutions for deep-water riser applications due to their light weight, high performance and good spoolability. For such applications, RTPs experience significant ambient pressure and sustain bending and/or tension loads during the installation and operation phases. Normally an RTP is composed of an inner Polyethylene (PE) liner, reinforced layers made from fibre-reinforced PE composites and an outer PE cover. The mechanical behaviour of such an RTP when it has been subjected to combined external pressure and bending has been studied through finite-element analysis (FEA). The nonlinear mechanical behaviour of both PE and the fibre-reinforced PE composites has been modelled by developing numerical algorithms that reflect the strain-dependent mechanical characteristics of PE. These algorithms are implemented in the analysis tool used, Abaqus/Standard, with the user subroutine, UMAT. The proposed FE model could accurately simulate the buckling and post-buckling response of the RTP and predict its failures under the combined external pressure and bending. Rotation-pressure interaction collapse envelopes of the RTP in different loading paths are generated. Additionally, the effects of ply angles , loading paths and diameter-to-thickness ( D / t ) ratios on the performance of the RTP under this loading case are investigated. The results obtained could be used to improve the design of RTPs for deep-water riser applications in the offshore oil and gas industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Integrity and Reliability Analysis · Corrosion Behavior and Inhibition · Mechanical stress and fatigue analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Chapman B, Tuohy J, Bulmer G, Bolam G, Kalman M, Sheldrake T and Soens C. Pipe and coupling design methodology for reinforced thermoplastic pipe (RTP) products. In: Proceedings of the 3rd composite materials for offshore operations, Houston: October 31 – November 2 2010. p. 231–46.
2. “Reinforced thermoplastic pipe” Airborne Composite Tubular http://airborne-oilandgas.com Last accessed on 1-07-2014.
3. “Pipelife. soluforce RTP (Reinforced Plastic Pipe)” Soluforce® Offshore. www.soluforce.net Last accessed on 1-07-2014.
4. API RP 15S. Qualifaction of spoolable reinforced plastic line pipe. American Petroleum Institute (API); 2006.
5. Dalmolen LGP, Kruyer M, Cloos PJ. Offshore application of “Reinforced Thermoplastic Pipe” (RTP). In: Proceedings of the 4th asian conference & exhibition, Kuala Lumpur: 2009. p. 14–18.
6. http://airborne-oilandgas.com Last accessed on 1-07-2014.
7. Murphey CE, Langner CG. Ultimate pipe strength under bending collapse and fatigue. In: Proceedings of the 4th international offshore and arctic engineering symposium, Dallas: February 17–21 1985. p. 467–77.
8. On the collapse of inelastic tubes under combined bending and pressure10.1016/0020-7683(88)90005-4 ↗
9. Collapse of long cylindrical shells under combined bending and pressure loads10.2514/3.49624 ↗
10. Bai · Int J Offshore Polar Eng · 1993 · 3 · 389
11. Tube collapse under combined external pressure, tension and bending10.1016/S0951-8339(97)00003-8 ↗
12. Buckling response of offshore pipelines under combined tension, bending, and external pressure10.1631/jzus.A1000489 ↗
13. Similitude study for a laminated cylindrical tube under tensile, torsion, bending, internal and external pressure. Part I: governing equations10.1016/S0263-8223(98)00068-3 ↗
14. Similitude study for a laminated cylindrical tube under tension, torsion, bending, internal and external pressure Part II: scale models10.1016/S0263-8223(98)00069-5 ↗
15. Starbuck JM, Eberle C. Analytical solution for the design of spoolable composite tubing. In: Proceedings of the 3rd International Conference on Composite Materials for Offshore Operations, Houston: October 31-November 2 2000. p. 397–412.
16. Pavlou · 2013
17. Development of glass fibre reinforced polyethylene pipes for pressure applications10.1179/146580100101540716 ↗
18. Analysis of flexural behaviour of reinforced thermoplastic pipes considering material nonlinearity10.1016/j.compstruct.2014.09.015 ↗
19. Abaqus user’s and theory manuals. Dassault Systèmes Simulia Corporation, Providence, RI, USA; 6.10 ed.; 2010.
20. Ward · 2005
21. Vasiliev · 2007
22. Benjamin JC. Continuous fibre reinfoced thermoplastic pipes [Ph.D Thesis]. Mechanical materials and manufacturing engineering. UK: University of Newcastle-upon-Tyne; 1999.
23. Bai Y, Xu F, Cheng P, Badaruddin MF, Ashri M. Burst capacity of reinforced thermoplastic pipe (RTP) under internal pressure. In: Proceedings of the ASME conference proceedings. rotterdam, June 19–24 2011. p. 281–88.10.1115/OMAE2011-49325 ↗
24. Bai Y, Xu F, Cheng P. Investigation on the mechanical properties of the Reinforced Thermoplastic Pipe (RTP) under internal pressure. In: Proceedings of the twenty-second international offshore and polar engineering conference, Rhodes, June 17–22, 2012. p. 109–116.
25. API 17J. Specification for unbonded flexible pipe. American Petroleum Institute (API); 2010.
26. Graves · 1994
27. Abaqus user subroutines reference manual. Dassault Systèmes Simulia Corporation, Providence, RI, USA; 6.10 ed.; 2010.
28. Response and stability of elastoplastic circular pipes under combined bending and external pressure10.1016/0020-7683(82)90086-5 ↗
29. Collapse of cylindrical, elastic tubes under combined bending, pressure and axial loads10.1016/0020-7683(77)90099-3 ↗
30. Brazier LG. On the flexure of thin cylindrical shells and other “thin” sections. In: Proceedings of the royal society of London. series a: mathematical, physical and engineering sciences, 1927; 116(773): p. 104–44.10.1098/rspa.1927.0125 ↗
31. Tensile yield in polyethylene10.1002/pen.760260806 ↗
32. Tensile yield of polyethylene and related copolymers: mechanical and structural evidences of two thermally activated processes10.1021/ma9601878 ↗
33. Evans JT, Gibson AG. Composite angle ply laminates and netting analysis. In: Proceedings of the royal society of London. series a: mathematical, physical and engineering sciences, 2002; 458(2028): p. 3079–88.10.1098/rspa.2002.1066 ↗
34. Buckling of reinforced thermoplastic pipe (RTP) under combined bending and tension10.1080/17445302.2013.835147 ↗
35. Chapman BJ, Evans JT, Frost SR, Gibson AG. Reinforced thermoplastic pipework for applications in the petrochemical industry. In: Proceedings of the 7th International conference on fibre reinforced composites (FRC’98), Cambridge: April 15–17 1998. p. 92–102.
36. Dodds DN, Southern A, Tuohy J, Sheldrake A. Design approach for a reinforced thermoplastic pipe and coupling system. In: Proceedings of the Fifth international conference: pipeline rehabilitation & maintenance, Bahrain: January 19–23 2002. p. 20–26.
37. Flexure analysis of spoolable reinforced thermoplastic pipes for offshore oil and gas applications10.1177/0731684413491442 ↗
38. Hull · 1982