Influences of fabric density on mechanical and moulding behaviours of 3D warp interlock para-aramid fabrics for soft body armour application
Source abstract
Abstract
Abstract For the past many decades’ enormous research has been done on mechanical and moulding properties of 2D woven and non-woven fabrics. The current paper presents a comprehensive investigation of the tensile, bending and moulding behaviours of 3D orthogonal warp interlock fabrics with different fabric densities. Four 3D warp interlock fabrics with different areal density made from 168Tex linear density p-aramid Kevlar yarn were manufactured on dobby loom in GEMTEX laboratory. Based on the investigation both fabric density and yarn density shows a significant effect on bending and tensile properties of the fabrics. The bending rigidity in the warp and weft directions become higher in preforms with denser weft and warp yarn densities respectively. In general, as the yarn density in the respective warp or/and weft direction increases, the maximum tensile load with maximum strain increases. Moreover, the fabric and yarn density has also shown a great impact on various mouldability characteristics of 3D warp interlock preforms while deformation. The study finally elucidated that, like other parameters, fabric and the yarn density of 3D warp interlock influenced greatly the tensile, bending and moulding properties where those parameters should be considered carefully while applying in various technical textile applications i.e., soft body armour.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Textile materials and evaluations · Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (66)
Show source-provided references
1. Engineering and analysis of gripping fabrics for improved ballistic performance
2. Zufle TT, Body armor for women, US 4578821 A; 1986.
3. Forming characteristics and surface damages of stitched multi-layered para-aramid fabrics with various stitching parameters for soft body armour design10.1016/j.compositesa.2018.02.037 ↗
4. Two dimensional (2D) P-aramid dry multi-layered woven fabrics deformational behaviour for technical applications
5. Ballistic performance of angle-interlock woven fabrics10.1080/00405000.2016.1176622 ↗
6. Use of 3D angle-interlock woven fabric for seamless female body armour: part I : ballistic evaluation
7. Tong · 2002
8. Composite materials modeling of 3D angle interlock woven fabric composites10.1177/0892705703016001206 ↗
9. Modeling strategies of 3D woven composites: a review10.1016/j.compstruct.2011.03.010 ↗
10. Failure behavior of 3D woven composites under transverse shear10.1016/S1359-835X(03)00123-4 ↗
11. Review of applications for advanced three-dimensional fibre textile composites10.1016/S1359-835X(99)00034-2 ↗
12. Two-dimensional (2D) fabrics and three-dimensional (3D) preforms for ballistic and stabbing protection: a review
13. Sun D, Chen X. Three-dimensional textiles for protective clothing. In: Advances in 3D textiles; 2015. p. 341–60.10.1016/B978-1-78242-214-3.00013-9 ↗
14. Experimental and numerical investigation of a 3D woven fabric subjected to a ballistic impact10.1016/j.ijimpeng.2015.08.011 ↗
15. 2D/3D woven fabrics for ballistic protection
16. Lefebvre M, Boussu F. High energy absorption of warp interlock fabrics : application to high speed impact of fragments. In: DYMAT International Conferences, 2009, no. DYMAT 2009; 2009. p. 429–35.10.1051/dymat/2009061 ↗
17. Experimental investigation about stamping behaviour of 3D warp interlock composite preforms10.1007/s10443-013-9369-9 ↗
18. The macroscopic elasticity of 3D woven composites10.1177/002199839502900606 ↗
19. Effect of frictions on the ballistic performance of a 3D warp interlock fabric: numerical analysis10.1007/s10443-011-9202-2 ↗
20. Effect of weaving on the tensile properties of carbon fibre tows and woven composites10.1177/073168401772679011 ↗
21. Effect of weaving damage on the tensile properties of three-dimensional woven composites10.1016/S0263-8223(02)00108-3 ↗
22. Experimental investigation of effects of stitching orientation on forming behaviors of 2D P-aramid multilayer woven preform
23. Investigation of bending and drape properties of woven fabrics and the effects of fabric constructional parameters and warp tension on these properties10.1177/0040517511433152 ↗
24. Mechanical properties of flax-fibre-reinforced preforms and composites: influence of the type of yarns on multi-scale characterisations10.1016/j.compositesa.2016.11.013 ↗
25. Mechanical behavior of flax/polypropylene commingled nonwoven at dry scale: influence of process parameters
26. Mechanical performance of composites based on various three-dimensional woven-fibre preforms10.1016/0266-3538(95)00135-2 ↗
27. Effect of weave structure on mechanical fracture behavior of three-dimensional carbon fiber fabric reinforced epoxy resin composites10.1016/0266-3538(92)90119-N ↗
28. Assessment of the mechanical properties of a new 3D woven fibre composite material10.1016/j.compscitech.2008.04.047 ↗
29. Effect of fabric structures on the mechanical properties of 3-D textile composites10.1177/1528083706057595 ↗
30. Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites10.1016/j.compositesa.2014.11.012 ↗
31. An experimental investigation into the mechanical behaviour of 3D woven fabrics for structural composites10.1007/s12221-014-1950-9 ↗
32. Effect of weft density and yarn crimps towards tensile strength of 3D angle interlock woven fabric
33. Experimental study of bending behaviour of reinforcements To cite this version10.1007/s11340-009-9234-9 ↗
34. Bending behavior of multilayered and multidirectional stitched aramid woven fabric structures10.1177/0040517511411974 ↗
35. Lv L, Zhang X, Ye F, Qian Y. Fabrication and mechanical performance of 3D woven basalt fiber composite materials; 2017;1:176–81.10.15407/fm24.01.076 ↗
36. Tensile behavior of 3D woven composites by using different fabric structures10.1016/S0261-3069(02)00053-5 ↗
37. Tensile behavior analysis on different structures of 3D glass woven perform for fibre reinforced composites
38. Assessment of the mechanical properties of a new 3D woven fibre composite material
39. A comparative study of tensile properties of non-crimp 3D orthogonal weave and multi-layer plain weave E-glass composites. Part 2: comprehensive experimental results10.1016/j.compositesa.2009.04.032 ↗
40. Brantner SB. policeone.com, Police History: The evolution of women in American law enforcement; 2015. [Online]. Available: https://www.policeone.com/police-history/articles/8634189-Police-History-The-evolution-of-women-in-American-law-enforcement/. [Accessed: 23-Dec-2016].
41. Et C. Etude présentée par Mme Michèle Monrique, (rapport); 2004. [Online]. Available: http://www.c2sd.sga.defense.gouv.fr/IMG/pdf/c2sd_synth_loriot_choix_femmes.pdf.
42. Carlson Richard A. Pleated ballistic package for soft body armor. US20100313321 A1; 2010.
43. Mellian SA. Body armor for women. US4183097 A; 1980.
44. Nelson JS, Price AL. Ballistic vest. US 5619748 A; 1997.
45. Hussein M, Parker G, Ballistic protective wear for female torso. US6281149 B1; 2001.
46. McQueer PS. Woman’s bullet resistant undergarment. US20110277202 A1; 2011.
47. Vives M, Ballistic protection armor. US5221807 A; 1993.
48. Carlson RA, Hills C. Female armor system. US20120174275 A1; 2012.
49. Dyer PA. Ballistic protective insert for use with soft body armor by female personnel. US5020157 A; 1991.
50. Use of three-dimensional angle-interlock woven fabric for seamless female body armor: Part II : mathematical modeling10.1177/0040517510363188 ↗
51. Moureaux B, Pfister FV, Van Zijl NA. Specially shaped multilayer armor. US5943694 A; 31-Aug-1999.
52. Hostettler IF, Rhum D, Forman MR, Michael N. (12) United States Patent subiectto any disclaimer: the term of this. vol. 1, no. 12, 2001.
53. Three-dimensional fiber reinforcement shapes obtainable from flat, bidirectional fabrics without wrinkling or cutting. Part 1. A single four-sided pyramid10.1016/S1359-835X(00)00013-0 ↗
54. Beyond the pin-jointed net: maximising the deformability of aligned continuous fibre reinforcements10.1016/S1359-835X(02)00014-3 ↗
55. 39—The fitting of woven cloth to surfaces10.1080/19447027.1956.10750433 ↗
56. Mouldability of angle-interlock woven fabrics for technical applications10.1177/004051750207200302 ↗
57. Study of changes in 3D-woven multilayer interlock fabric preforms while forming10.1080/00405000.2012.676267 ↗
58. Dufour C, Boussu F, Wang P, Soulat D. Experimental forming studies on 3D warp interlock fabrics. Eccm16 – 16Th Eur. Conf. Compos. Mater., no. September 2016; 2014.10.1007/978-3-319-69050-6_3 ↗
59. Liu LS, et al., Formability of tufted 3-dimensional composite reinforcement Formability of tufted 3-dimensional composite reinforcement. In: ESAFORM 2016 AIP Conf. Proc.; 2016, vol. 1769. P. 170041-1–170041-5.10.1063/1.4963597 ↗
60. Dufour C, Boussu F, Wang P, Soulat D, Ghys P. Forming behaviour of 3D warp interlock fabric to produce tubular cross composite part. in 14th AUTEX World Textile Conference; 2014, no. May.
61. Analysis of the blank holder force effect on the preforming process using a simple discrete approach10.4028/www.scientific.net/KEM.554-557.441 ↗
62. A simple discrete method for the simulation of the preforming of woven fabric reinforcement10.4028/www.scientific.net/KEM.504-506.213 ↗
63. The stiffness of woven textiles10.1080/19447026008659775 ↗
64. Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses10.1016/j.compscitech.2011.01.011 ↗
65. On the relationship between shear angle and wrinkling of textile composite preforms10.1016/S1359-835X(96)00150-9 ↗
66. Textile materials: recovery from imposed deformation10.1126/science.177.4050.657 ↗