journal article·1991-04

Layflat Behavior and Temperature Variation in Calendering: A Review

Ampere A. Tseng

Publisher page

Abstract

Calendering is the most efficient process for making large-volume, high- quality polymer sheets. The major challenge in the calendering process is to produce sheets with uniform gauge and no buckling, i.e., good layflatness. In this paper, the be havior of layflatness in calendering processing is reviewed to provide a basic understand ing of layflatness behavior. The basic processing parameters that control the layflatness are also identified. Observation by measuring the temperatures of the workpiece and calender rolls during operation is then conducted. Following a description of the sensor and proce dure used in measurement, the results and their relationship to layflatness are discussed. The measuring results are also used to assist in identifying the basic controlling parame ters of the layflat behavior. Finally this paper is concluded by recommendation of areas where further work is needed. A new approach to quantify the layflatness and a modifica tion to the current process for better control of the layflatness are also included in the recommendation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Rheology and Fluid Dynamics Studies · Material Properties and Processing

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Mechanical Engineering and Mechanics Drexel University Philadelphia, PA 19104

References (26)

Show source-provided references
1. Bielitza, H.J. and K. Marquardt. 1988 "Calendering," in Modern Plastics Encyclopedia 1988 New York, NY McGraw-Hill, pp 210-214
2. Coaker, A W M 1984 "Calendered Rigid PVC Products," in Engineering with Rigid PVC. I. L Gomez, ed New York, NY Marcel Dekker, pp 386-438.
3. 10.1016/0141-1195(90)90004-P10.1016/0141-1195(90)90004-P ↗
4. Wockener, W. · Kunststoffe · 1989 · 79 · 1186
5. Gust, S.J. · Plastics Engineering · 1987 · 43 · 29
6. Kelk, G.F. · Iron and Steel Engineer · 1986 · 63 · 48
7. Zukor, L.J. · Plastics Technology · 1961 · 7 · 48
8. Gould, R.J. · Modern Plastics · 1988 · 65 · 158
9. Cleereman, K.J. 1974. "Influence of Orientation on the Properties of Amorphous Polymers," in Technological Aspects of the Mechanical Behavior of Polymers. R. F. Boyer, ed. New York, NY: John Wiley & Sons, pp. 31-35.
10. Parikh, D.R. · Plastics Engineering · 1988 · 44 · 47
11. Hay, I.L. 1980. 'Production and Measurement of Orientation," in Methods of Experimental Physics, Polymer, Part C, Physical Properties, Vol. 16. R. A. Fava, ed. New York, NY: Academic Press, pp. 137-184.10.1016/S0076-695X(08)60532-3 ↗
12. 10.1016/0142-9418(90)90024-810.1016/0142-9418(90)90024-8 ↗
13. Robinson, M.E. · J. Polymer Science · 1978 · 16 · 2115
14. 10.1002/pen.76014050910.1002/pen.760140509 ↗
15. 10.1002/pen.76021151010.1002/pen.760211510 ↗
16. 10.1002/app.1968.07012012010.1002/app.1968.070120120 ↗
17. 10.1002/pen.76009010510.1002/pen.760090105 ↗
18. 10.1080/0022234770822036410.1080/00222347708220364 ↗
19. Ferry, J.D. · 1970
20. 1988
21. 10.1016/0377-0257(88)85037-710.1016/0377-0257(88)85037-7 ↗
22. 10.3139/217.90029210.3139/217.900292 ↗
23. Tseng, A.A. · 1991
24. 10.1002/app.1977.07021121310.1002/app.1977.070211213 ↗
25. Chan, T. W D.
26. Tseng, A.A. · 1991