journal article·2020-04

Influence of hygrothermal ageing on the mechanical properties of CFRP-concrete joints and of their components

Karrar Al-Lami, Pierluigi Colombi, Tommaso D'Antino

Publisher page

Abstract

Abstract Externally bonded (EB) fiber reinforced polymer (FRP) composites have been effectively employed to strengthen existing reinforced concrete (RC) structures. However, relatively limited information is available regarding the long-term behavior of FRP-concrete joints. In this paper, different experimental tests are employed to investigate the effect of hygrothermal ageing on the bond behavior of a carbon FRP composite applied to a concrete substrate and on the mechanical properties of the epoxy resin and FRP composite considered. The experimental campaign includes tensile tests of epoxy resin, carbon FRP (CFRP) coupon, pull-off tests of the CFRP bonded to the concrete substrate, and single-lap direct-shear tests of CFRP-concrete joints. Specimens were conditioned in warm water (38 ± 2 °C) for 500, 1000, and 1500 h to accelerate the possible degradation induced by a simulated high-moisture exposure environment. The parameters studied were the tensile properties of epoxy resin and CFRP coupons and the fracture energy of the CFRP-concrete interface, which was computed from the CFRP strain measured in the single-lap direct-shear tests using the digital image correlation (DIC) method. Results indicate that both the mechanical properties of the epoxy resin and the CFRP-concrete interface fracture energy were slightly affected by the exposure conditions.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Structural Behavior of Reinforced Concrete · Concrete Corrosion and Durability · Innovative concrete reinforcement materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. Hollaway · 2008
2. Application of polymer composites in civil construction: a general review10.1016/j.compstruct.2007.06.007 ↗
3. Flexural response of reinforced concrete beams strengthened with end-anchored partially bonded carbon fiber-reinforced polymer strips10.1061/(ASCE)1090-0268(2005)9:2(170) ↗
4. Environmental durability of adhesively bonded FRP/steel joints in civil engineering applications: state of the art10.1016/j.compositesb.2015.07.014 ↗
5. Development of a simplified bond stress-slip model for bonded FRP-concrete interfaces10.1016/j.conbuildmat.2014.06.037 ↗
6. Standardised double-shear test for determining bond of FRP to concrete and corresponding model development10.1016/j.compositesb.2013.06.019 ↗
7. Static and fatigue behaviour of the bond interface between concrete and externally bonded CFRP in single shear10.1016/j.engstruct.2015.03.068 ↗
8. FRP-brick masonry bond degradation under hygrothermal conditions10.1016/j.compstruct.2016.03.037 ↗
9. Time performance of concrete-CFRP bond under effects of freeze-thaw cycles and sustained loading
10. Use of fiber reinforced polymer composites as reinforcing material for concrete10.1061/(ASCE)0899-1561(2002)14:3(191) ↗
11. Environmental durability of externally bonded FRP materials intended for repair of concrete structures10.1016/j.conbuildmat.2010.11.096 ↗
12. Degradation of bond between FRP and RC beams10.1016/j.compstruct.2007.10.014 ↗
13. Mechanical behavior of concrete – resin/adhesive – FRP structural assemblies under low and high temperatures10.1016/j.conbuildmat.2015.12.127 ↗
14. Experimental characterization of the bond between externally bonded reinforcement (EBR) CFRP strips and concrete at elevated temperatures10.1016/j.cemconcomp.2015.02.008 ↗
15. Temperature as an accelerating factor for long-term durability testing of FRPs: should there be any limitations?10.1061/(ASCE)CC.1943-5614.0000102 ↗
16. Water effects on the bond strength of concrete/concrete adhesive joints10.1016/j.conbuildmat.2005.06.015 ↗
17. Debonding of concrete-epoxy interface under the coupled effect of moisture and sustained load10.1016/j.cemconcomp.2017.03.019 ↗
18. Durability of FRP-concrete bonded joints in structural rehabilitation: a review10.1016/j.ijadhadh.2018.02.014 ↗
19. Effects of environmental conditioning on the bond behavior of FRP and FRCM systems applied to concrete elements
20. Critical review of strength and durability of concrete beams externally bonded with FRP10.1080/23311916.2018.1525015 ↗
21. Effects of applied environmental conditions on the pull-out strengths of CFRP-concrete bond10.1016/j.conbuildmat.2016.03.195 ↗
22. Developments in the durability of FRP-concrete bond10.1016/j.conbuildmat.2014.12.106 ↗
23. Effect of synergistic environmental conditions on thermal properties of a cold curing epoxy resin10.1016/j.compositesb.2017.01.027 ↗
24. Accelerated ageing behaviour of the adhesive bond between concrete specimens and CFRP overlays10.1016/j.conbuildmat.2010.08.003 ↗
25. Effects of hygrothermal conditioning on epoxy adhesives used in FRP composites10.1016/j.conbuildmat.2015.08.056 ↗
26. Comparison of laboratory and field environmental conditioning on FRP-concrete bond durability10.1016/j.conbuildmat.2016.06.074 ↗
27. Experimental investigation of the influence of moisture on the bond behavior of FRP to concrete interfaces10.1061/(ASCE)CC.1943-5614.0000142 ↗
28. Durability of the bond between CFRP plates and concrete exposed to harsh environments10.1061/(ASCE)MT.1943-5533.0001226 ↗
29. Fe modelling of CFRP-concrete interface subjected to cyclic temperature, humidity and mechanical stress10.1016/j.compstruct.2009.08.036 ↗
30. Fracture properties of CFRP – concrete bond subjected to three environmental conditions10.1061/(ASCE)CC.1943-5614.0000665 ↗
31. Development of the nonlinear bond stress-slip model of fiber reinforced plastics sheet-concrete interfaces with a simple method10.1061/(ASCE)1090-0268(2005)9:1(52) ↗
32. Size effect and fracture characteristics of composite laminates10.1115/1.2806812 ↗
33. Strengthening of concrete prisms using the plate-bonding technique10.1007/BF00013161 ↗
34. A study on bond mechanism of carbon fiber sheet
35. Durability of CFRP–concrete joints under freeze–thaw cycling10.1016/j.coldregions.2010.11.008 ↗
36. Stress transfer and fracture propagation in different kinds of adhesive joints
37. Sedigh Imani F. Traction-separation law for CFRP-concrete interface fracture under mode II loading. 2010.
38. Bond-slip model for FRP laminates externally bonded to concrete at elevated temperature10.1061/(ASCE)CC.1943-5614.0000337 ↗
39. Durability of FRP concrete bonds and its constituent properties under the influence of moisture conditions10.1061/(ASCE)MT.1943-5533.0001093 ↗
40. Bond characteristics of CFRP-strengthened concrete members subjected to cyclic temperature and mechanical stress at low humidity10.1016/j.compstruct.2016.10.131 ↗
41. Bond between FRP composites and concrete: assessment of design procedures and analytical models10.1016/j.compositesb.2013.12.075 ↗
42. Sika. Sikadur®-300 Product Data Sheet. Edition 21/05/2015.
43. International Code Council Evaluation Service (ICC-ES) · 2014
44. CSLLPP - Servizio Tecnico Centrale. Linea Guida per la identificazione, la qualificazione ed il controllo di accettazione di compositi fibrorinforzati a matrice polimerica (FRP) da utilizzarsi per il consolidamento strutturale di costruzioni esistenti. Rome, Italy: 2015.
45. Effect of the environment on the performance of GFRP reinforcing bars10.1016/j.compositesb.2017.12.037 ↗
46. ASTM D638-03. Standard test method for tensile properties of plastics 1. 2004;12(2):1–8. Retrieved from https://doi.org/10.1520/D0638-14.10.1520/D0638-14 ↗
47. EN BS. 2561. Aerosp Ser Fibre Reinf Plast Laminates-Tensile Test Parallel to Fibre Dir Eur Comm Stand Brussels, Belgium. 1995.
48. EN BS. · 2009
49. ASTM D4541 – 09. Standard test method for pull-off strength of coatings using portable adhesion; 2009. Retrieved from https://doi.org/10.1520/D4541-17.10.1520/D4541-17 ↗
50. CNR. Guide for the design and construction of externally bonded FRP systems for strengthening existing structures. CNR – Advis Comm Tech Recomm Constr CNR-DT 200 R1/2013. 2013:154.
51. Determination of the interfacial properties of SRP strips bonded to concrete and comparison between single-lap and notched beam tests10.1016/j.engfracmech.2017.09.020 ↗
52. Experimental investigation and fracture analysis of debonding between concrete and FRP sheets
53. Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints10.1016/j.compstruct.2018.03.005 ↗
54. A new 3D experimentally consistent XFEM to simulate delamination in FRP-reinforced concrete10.1016/j.compositesb.2016.01.024 ↗