journal article·2021-02Open access

Experimental and numerical benchmark study of mode II interlaminar fracture toughness of unidirectional GFRP laminates under shear loading using the end-notched flexure (ENF) test

A. Gliszczynski, N. Wiącek

Abstract

The paper deals with experimental and numerical analysis of end-notched flexure (ENF) test of GRFP unidirectional laminates. The numerical analyses were performed in the ANSYS® program based on the finite element method. The fracture zone under mode II shear loading was modelled with the application of Virtual Crack Closure Technique (VCCT) associated with Linear Fracture Criterion and with the use of Cohesive Zone Method (CZM) coupled with bilinear delamination law. The problem of ENF test was solved with the use of one- and three-dimensional models with the implementation of linear interface element or contact element and by modelling the test in an accurate way (support and load rollers) and simplified by using boundary conditions. The benchmark studies confirmed the usefulness of several data reduction schemes and ruled out the Corrected Beam Theory as ineffective for determining the mode II critical energy release rate as well as highlighted the superiority of the CZM method over the VCCT has been confirmed by: (i) the possibility of applying the method for coarse meshes; (ii) convergence of results achieved for both two- and three-dimensional models; (iii) significantly shorter CPU time; and (iv) no need of the initial delamination front assumption.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Composite Structure Analysis and Optimization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (49)

Show source-provided references
1. Stability and load-carrying capacity of short open-section composite columns under eccentric compression loading10.1016/j.compstruct.2020.112716 ↗
2. Paperboard tubes failure due to lateral compression-experimental and numerical study10.1016/j.compstruct.2018.07.027 ↗
3. The influence of load eccentricity on the behavior of thin-walled compressed composite structures10.1016/j.compstruct.2019.01.073 ↗
4. Non-linear stability of the in-plane functionally graded (FG) plate10.1016/j.compstruct.2019.02.017 ↗
5. Numerical and experimental failure analysis of thin-walled composite columns with a top-hat cross section under axial compression10.1016/j.compstruct.2018.07.068 ↗
6. Czechowski L, Kolakowski Z. Analysis of the functionally step-variable graded plate under in-plane compression, Materials 2019:12(24);4090.10.3390/ma12244090 ↗
7. ASTM D7905 / D7905M-14, Standard Test Method for Determination of the Mode II Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites, ASTM International, West Conshohocken, PA, 2019.
8. International Standard Organization. ISO 15114:2014, Fibre-reinforced Plastic Composites—Determination of the Mode II Fracture Resistance for Unidirectionally Reinforced Materials using the Calibrated End-loaded Split (C-ELS) Test and an Effective Crack Length Approach. 2014.
9. American Society for Testing and Materials. ASTM D6671/D6671M, Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites. 2013.
10. Towards a consensus on mode II adhesive fracture testing: Experimental study10.1016/j.tafmec.2018.09.014 ↗
11. Numerical aspects of cohesive-zone models10.1016/S0013-7944(03)00122-X ↗
12. Cohesive zone length in numerical simulations of composite delamination10.1016/j.engfracmech.2008.06.004 ↗
13. A damage model for the simulation of delamination in advanced composites under variable-mode loading10.1016/j.mechmat.2005.10.003 ↗
14. Simulation of delamination growth in multidirectional laminates under mode I and mixed mode I/II loadings using cohesive elements10.1016/j.compstruct.2014.05.042 ↗
15. Dávila CG, Rose Ch, Camanho PP. A procedure for superposing linear cohesive laws to represent multiple damage mechanisms in the fracture of composites, Int. J. Fract. 2009:158:211–223.10.1007/s10704-009-9366-z ↗
16. Analysis of the Numerical and Geometrical Parameters Influencing the Simulation of Mode I and Mode II Delamination Growth in Unidirectional and Textile Composites10.1007/s10443-014-9429-9 ↗
17. Accuracy of cohesive laws with different shape for the shear behaviour prediction of bonded joints10.1080/00218464.2018.1438895 ↗
18. Mode-I, mode-II and mixed-mode I/II fracture behaviour of composite bonded joints: Experimental characterization and numerical simulation10.1016/j.compositesb.2015.04.006 ↗
19. Equivalent crack based analyses of ENF and ELS tests10.1016/j.engfracmech.2007.03.005 ↗
20. An experimental analysis of the end-notched flexure composite laminates beams with elastic couplings
21. Mode I, II and Mixed Mode I/II delamination growth in composites10.1016/j.compstruct.2013.12.009 ↗
22. Krueger, R. An Approach to Assess Delamination Propagation Simulation Capabilities in Commercial Finite Element Codes; NASA/TM-2009-215123. 2008
23. Benchmark assessment of automated delamination propagation capabilities in finite element codes for static loading10.1016/j.finel.2012.01.006 ↗
24. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models10.1016/j.engfracmech.2006.08.025 ↗
25. Crack blunting and the strength of soft elastic solids10.1098/rspa.2002.1057 ↗
26. Irwin GR. Plastic zone near a crack and fracture toughness Proceedings of the seventh Sagamore Ordnance materials conference, vol. IV, Syracuse University, New York, 1960;63-78.
27. Yielding of steel sheets containing slits10.1016/0022-5096(60)90013-2 ↗
28. The mathematical theory of equilibrium cracks in brittle fracture10.1016/S0065-2156(08)70121-2 ↗
29. Rice JR. The mechanics of earthquake rupture, A.M. Dziewonski, E. Boschhi (Eds.), Physics of the Earth’s interior, Proceedings of the international school of physics “Enrico Fermi”, Course 78, 1979, Italian Physical Society/North-Holland, Amsterdam 1980, 555-649
30. Falk · 2001 · 543
31. Analysis of crack formation and crack growth in concrete by means of fracture mechanics and finite elements10.1016/0008-8846(76)90007-7 ↗
32. Cohesive models for damage evolution in laminated composites10.1007/s10704-005-4729-6 ↗
33. Extended finite element method for cohesive crack growth10.1016/S0013-7944(01)00128-X ↗
34. Davila CG, Camanho PP, de Moura MFSF. Mixed-Mode decohesion elements for analyses of progressive delamination. In: Proceedings of the 42nd AIAA/ASME/ASCE/AHS/ASC structures. Structural dynamics and materials conference, Seattle, Washington; April 16–19, 2001.10.2514/6.2001-1486 ↗
35. Accurate simulation of delamination growth under mixed mode loading using cohesive elements: definition of interlaminar strengths and elastic stiffness10.1016/j.compstruct.2010.01.012 ↗
36. Recommendations for an ASTM standardized test for determining GIIC of unidirectional laminated polymeric matrix composites10.1520/JAI102619 ↗
37. Evaluation of precracking methods for the end notched flexure test10.2514/1.24188 ↗
38. Moore DR, Pavan A, Williams JG, editors. Fracture mechanics testing methods for polymers, adhesives and composites. ESIS Publication 28. Elsevier Science Ltd, 2001.
39. Corrections for mode II fracture toughness specimens of composite materials10.1016/0266-3538(92)90096-L ↗
40. User’s Guide ANSYS 18.2; Ansys®, Inc.: Houston, TX, USA, 2017.
41. Camanho · 2015
42. Mode I Interlaminar Fracture of Glass/Epoxy Unidirectional Laminates: Part II: Numerical Analysis10.3390/ma12101604 ↗
43. Review and benchmark study on the analysis of low-velocity impact on composite laminates10.1016/j.engfailanal.2017.12.019 ↗
44. Beaumont · 2015
45. Dependence of fracture toughness of composite laminates on interface ply orientations and delamination growth direction10.1016/j.compscitech.2004.03.007 ↗
46. Analysis of mode II interlaminar fracture of multidirectional laminates10.1016/j.compositesa.2003.09.007 ↗
47. de Morais AB. Mode II interlaminar fracture of glass/epoxy multidirectional laminates
48. Mode II interlaminar fracture of carbon/epoxy multidirectional laminates10.1016/j.compscitech.2003.12.001 ↗
49. Analysis of the end-notched flexure test configuration applicability for mechanically coupled fibre reinforced composite laminates10.1016/j.compstruct.2016.12.051 ↗