journal article·2012-01

Investigation of the parameters that influence the accuracy of bond defect detection in CFRP bonded specimens using IR thermography

Jawdat Tashan, Riadh Al-mahaidi

Composite Structures· Volume 94· Issue 2
Publisher page

Abstract

Abstract Infra-red (IR) testing has emerged as a promising non-destructive method (NDM) to detect and effectively observe bond defects in composite materials. This paper presents the findings of an investigation of carbon fiber-reinforced polymer (CFRP) fabrics and laminates externally bonded to concrete and steel members. Various kinds of artificial bond defects at the CFRP-substrate bond surface were investigated in specimens with single- as well as multi-layer CFRP fabrics. Particular emphasis was placed on the use of different heating modules in the IR nondestructive testing. This was implemented by generating different thermal waves within the CFRP-substrate bond surface. The results show that substrate material type and methods of surface preparation have a marked influence on the type of heating modules that produce the best detection capability. The results also show that the number of CFRP layers has a considerable effect on the effectiveness of bond identification and the accuracy of the IR images.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · Ultrasonics and Acoustic Wave Propagation · Structural Health Monitoring Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (16)

Show source-provided references
1. Investigation into CFRP laminate anchorage systems utilising bi-directional fabric wrap10.1016/j.compstruct.2010.10.012 ↗
2. Analysis of test specimens for cohesive near-bond failure of fiber-reinforced polymer-plated concrete10.1061/(ASCE)1090-0268(2004)8:6(528) ↗
3. Strengthening of circular hollow steel tubular sections using high modulus CFRP sheets10.1016/j.conbuildmat.2006.06.014 ↗
4. Torsional capacity of CFRP strengthened reinforced concrete beams10.1061/(ASCE)1090-0268(2007)11:1(71) ↗
5. An experimental investigation on shear behaviour of RC T-beams strengthened with CFRP using photogrammetry10.1016/j.compstruct.2006.12.012 ↗
6. Modelling of CFRP-concrete bond using smeared and discrete cracks10.1016/j.compstruct.2006.04.039 ↗
7. Nondestructive evaluation of carbon fiber-reinforced polymer-concrete bond using infrared thermography
8. Hu CW, Shih JKC, Delpak R, Tann DB. Detection of air blisters and crack propagation in FRP strengthened concrete elements using infrared thermography. Infrared Camera Application Conference. Orlando, Florida; 2002.
9. Brown JR, Hamilton HR. NDE of fiber-reinforced polymer composites bonded to concrete using IR thermography. Thermosense XXVI 1ed. Orlando, FL, USA: SPIE-Int. Soc. Opt. Eng; 2004. p. 414–24.10.1117/12.546866 ↗
10. Brown JR, Hamilton HR. Quantitative infrared thermography inspection for FRP applied to concrete using single pixel analysis. Constr Build Mater, 2010, in press.
11. Malhotra · 2004
12. Optimization of heating protocol in thermal NDT short and long heating pulses: a discussion10.1080/09349849409409677 ↗
13. Lockin-ESPI interferometric imaging for remote non-destructive testing10.1016/j.ndteint.2006.04.006 ↗
14. Hukse Flux. PU seriesheat flux sensors and specials; 2011.
15. Generalised threshold selection for edge detection10.1016/0031-3203(88)90054-4 ↗
16. Maldague · 2001