Fatigue life assessment of FRP cable for long-span cable-stayed bridge
Source abstract
Abstract
Abstract This study evaluates fatigue life of carbon fiber reinforced polymer (CFRP), basalt fiber reinforced polymer (BFRP) and steel cables considering the sag effect for cable-stayed bridges with various safety factors. The fatigue cycles of the cables during designed service period were first studied by an analysis of vehicle load statistics. The least favorable cables and their stress amplitudes were determined by finite element (FE) analysis. Fatigue life assessment based on the design stress and service life of the cable was conducted by developing the combined algorithm of equivalent transformation. The results indicate that the cables in the bridge undergo approximately up to 1.14 × 10 9 fatigue cycles during 100 service years. The most unfavorable cable is the one in the mid-span position, and its equivalent stress amplitude is almost 12 times the actual stress amplitude. The fatigue life of CFRP cables increases much faster than that of BFRP and steel cables with increasing of safety factor . The fatigue lives of CFRP and BFRP cables are 3 and 1.4 times, respectively, compared to that of a steel cable with the safety factor of 2.55. To satisfy 100 years of design life, safety factor of CFRP, BFRP and steel cables should be no less than 2.55, 3.27 and 3.64, respectively.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Mechanical stress and fatigue analysis · Concrete Corrosion and Durability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. Fatigue failure analysis of stayed cables with initial defects: Ewijk bridge case study10.1016/j.strusafe.2014.05.007 ↗
2. Feasibility of a 1400 m span steel cable-stayed bridge10.1061/(ASCE)1084-0702(2004)9:5(444) ↗
3. Investigation on a 1000-m scale cable-stayed bridge with fiber composite cable
4. Study of super long span cable-stayed bridges with CFRP components10.1016/j.engstruct.2010.10.013 ↗
5. Performance of CFRP tendon–anchor assembly under fatigue loading10.1016/j.compstruct.2006.05.023 ↗
6. Evaluation of FRP and hybrid FRP cables for super long-span cable-stayed bridges10.1016/j.compstruct.2010.01.023 ↗
7. Integrated high-performance thousand-meter scale cable-stayed bridge with hybrid FRP cables10.1016/j.compositesb.2009.09.001 ↗
8. Analysis of geometrical and mechanical properties of cable-stayed bridge10.1016/j.proeng.2013.04.137 ↗
9. Experimental study of vibration characteristics of FRP cables for long-span cable-stayed bridges10.1061/(ASCE)BE.1943-5592.0000656 ↗
10. Proposal for a carbon fibre reinforced composite bridge across the Strait of Gibraltar at its narrowest site
11. Chapter 25 – Case study: the Russky bridge
12. Experimental and numerical investigation on the static and dynamic behaviors of cable-stayed bridges with CFRP cables10.1016/j.compositesb.2016.11.048 ↗
13. On the design and optimization of hybrid carbon fiber reinforced polymer-steel cable system for cable-stayed bridges10.1016/j.compositesb.2014.08.031 ↗
14. Integrated finite strip analysis for long-span cable-stayed bridges10.1016/j.compstruc.2015.05.031 ↗
15. Effect of pavement maintenance cycle on the fatigue reliability of simply-supported steel I-girder bridges under dynamic vehicle loading10.1016/j.engstruct.2016.12.022 ↗
16. Cost and safety optimization of structural design specifications10.1016/S0951-8320(01)00046-1 ↗
17. AASHTO. Association of state highway and transportation officials. Washington (DC, USA); 2004.
18. Eurocode · 2003
19. JTG D60. General Specifications for Design of Highway Bridges and Culverts; 2015 [S].
20. Analysis on characteristics of traffic demand about Sutong Bridge10.1016/j.sbspro.2013.08.286 ↗
21. Cable optimization of a long span cable stayed bridge in La Coruña (Spain)10.1016/j.advengsoft.2010.05.001 ↗
22. JTG D64. Specification for Design of Highway Steel Bridge; 2015 [S].
23. Research on the fatigue whole life of asphalt mixture based on the nonlinear damage theory10.1016/j.conbuildmat.2017.08.176 ↗
24. Transfer of Australasian bridge design to fatigue verification system of Eurocode 310.1016/j.jcsr.2016.03.023 ↗
25. Fatigue and creep analyses of adhesively bonded anchorages for CFRP tendons10.1016/j.ijadhadh.2014.05.013 ↗
26. Fatigue behavior of basalt fiber-reinforced polymer tendons for prestressing applications10.1061/(ASCE)CC.1943-5614.0000649 ↗
27. Design S-N curves for Old Portuguese and French riveted bridges connection based on statistical analyses10.1016/j.proeng.2016.08.865 ↗
28. Experimental and numerical study of the fatigue properties of corroded parallel wire cables10.1061/(ASCE)BE.1943-5592.0000235 ↗
29. Enhancement of basalt FRP by hybridization for long-span cable-stayed bridge10.1016/j.compositesb.2012.06.001 ↗