Ballistic analysis of fiber metal laminates impacted by flat and conical impactors
Source abstract
Abstract
Abstract In the present study, the ballistic limit of GLARE is investigated experimentally and numerically. Ballistic tests were conducted using one stage gas gun. In the experimental part, the ballistic limit of GLARE was determined. The effect of aluminum lamina thickness and the nose shape of projectile on the ballistic limit were also investigated. The experimental results show that the ballistic limit of GLARE impacted by a flat projectile is higher than in the case of a conical nose projectile, and that by decreasing the aluminum laminate thickness from 0.5 mm to 0.3 mm, the Specific Perforation Energy (SPE) is increased. In the numerical section, the penetration process was simulated using LS–DYNA software. The validation of the finite element model was done by experimental results. The effects of various involved parameters such as laminate thickness, mass and radii of impactor were also investigated. The numerical results prove the efficiency of GLARE over bare aluminum laminate with equal thickness, due to the lower deflection and higher SPE. Furthermore, the less the mass of the impactor or the greater the diameter of the flat projectile, the greater the ballistic limit of GLARE. Reasonable agreement is concluded between the numerical and experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Velocity Impact and Material Behavior · Mechanical Behavior of Composites · Structural Response to Dynamic Loads
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. Applications of fiber-metal laminates10.1002/pc.10211 ↗
2. Glare technology development 1997–2000
3. Impact loading on fibre metal laminates10.1016/0734-743X(96)89050-6 ↗
4. Impact properties of fibre metal laminates10.1016/0961-9526(93)90001-Z ↗
5. Towards application of fibre metal laminates in large aircraft10.1108/00022669910303711 ↗
6. Vlot A. Low-velocity impact loading: on fibre reinforced aluminium laminates (ARALL and GLARE) and other aircraft sheet materials. Delft University of Technology; 1993.
7. Investigation on the high velocity impact properties of glass-reinforced fiber metal laminates10.1177/0021998312449883 ↗
8. Impact perforation resistance and fracture mechanisms of a thermoplastic based fiber-metal laminate10.1023/A:1010904930497 ↗
9. The impact properties of high-temperature fiber-metal laminates10.1177/0021998306065291 ↗
10. Investigation of high velocity impact of cylindrical projectile on sandwich panels with fiber–metal laminates skins and polyurethane core10.1016/j.ast.2013.12.005 ↗
11. Ballistic impact of GLARE™ fiber–metal laminates10.1016/S0263-8223(03)00036-9 ↗
12. An integrated study on the low-velocity impact response of the GLARE fibre-metal laminate10.1016/j.compstruct.2012.12.016 ↗
13. Impact resistance of fiber-metal laminates: a review10.1016/j.ijimpeng.2012.05.006 ↗
14. Experimental and numerical investigation of metal type and thickness effects on the impact resistance of fiber metal laminates10.1007/s10443-011-9235-6 ↗
15. Impact response of fiber metal laminates
16. Delamination resistance of post-stretched fibre metal laminates10.1177/002199839803201903 ↗
17. Low velocity impact analysis of fiber metal laminates (FMLs) in thermal environments with various boundary conditions10.1016/j.compstruct.2016.04.036 ↗
18. The impact resistance of polypropylene-based fibre–metal laminates10.1016/j.compscitech.2005.11.008 ↗
19. ASTM D2651-Standard Guide for Preparation of Metal Surfaces for Adhesive Bonding 1, 2012. http://dx.doi.org/10.1520/D2651-01R08.2.
20. Ballistic impact perforation into GLARE targets: experiment, numerical modelling and investigation of aluminium stacking sequence
21. Abrate · 1998
22. Corporation · 2006
23. Deformation measurements of blast loaded plates using digital image correlation and high-speed photography10.1051/epjconf/20100612006 ↗
24. Response of glass-fiber-reinforced epoxy specimens to high rates of tensile loading10.1007/BF02324887 ↗
25. Jones · 1997