Experimental and analytical study on the behavior of RC beams with externally bonded carbon-FRCM composites
Source abstract
Abstract
Abstract This paper presents both experimental and analytical study results for predicting the flexural capacity of reinforced concrete (RC) beams with externally bonded carbon fabric reinforced cementitious matrix (carbon-FRCM). Firstly, the available prediction approaches for FRCM-strengthened RC in flexure were summarized. The prediction formulas were deficient in the fabric slippage failure. Nine carbon-FRCM specimens with different layers of carbon fabric (CF) were tested under uniaxial tensile loading. Four RC beams were strengthened in flexure with carbon-FRCM having different layers of CF, which were tested under four-point bending. From the tensile test results, the apparent strain of CF was derived from the global strain of carbon-FRCM, and the two-layer carbon-FRCM was an optimized selection in the design of multilayer carbon-FRCM. From the bending test results, the utilization efficiency of CF was slightly higher in the fabric slippage failure than that in the peeling-off of concrete cover, and the failure mode was differentiated as the layers of CF increased. Additionally, a new procedure of prediction formulas in flexure for carbon-FRCM-strengthened beams was proposed, using the apparent strain of CF to assess the strengthening performance of beams at different load-carrying scenarios. The prediction of the proposed formulas agreed well with the experimental results.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Structural Behavior of Reinforced Concrete · Masonry and Concrete Structural Analysis · Innovative concrete reinforcement materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. ACI 549.4R. Guide to Design and Construction of Externally Bonded FabricReinforced Cementitious Matrix (FRCM) Systems for Repair and Strengthening Concrete and Masonry Structures. American Concrete Institute, Farmington Hills, MI, U.S.A., 2013.
2. Fabric-reinforced cementitious matrix: a promising strengthening technique for concrete structures10.1016/j.conbuildmat.2016.11.125 ↗
3. A qualification method for externally bonded Fibre Reinforced Cementitious Matrix (FRCM) strengthening systems10.1016/j.compositesb.2015.03.079 ↗
4. Mechanical characterization of different FRCM systems for structural reinforcement10.1016/j.conbuildmat.2017.04.051 ↗
5. Concrete confinement with textile-reinforced mortar jackets
6. The ICCP-SS technique for retrofitting reinforced concrete compressive members subjected to corrosion10.1016/j.conbuildmat.2018.01.096 ↗
7. Concrete columns confined with fibre reinforced cementitious mortars: experimentation and modelling10.1016/j.conbuildmat.2013.11.048 ↗
8. Structural behaviour of fabric reinforced cementitious matrix (FRCM) strengthened concrete columns under eccentric loading10.1016/j.compositesb.2015.01.042 ↗
9. Textile reinforced concrete for strengthening of RC columns: a contribution to resource conservation through the preservation of structures10.1016/j.conbuildmat.2016.11.133 ↗
10. Structural upgrade using basalt fibers for concrete confinement10.1061/(ASCE)CC.1943-5614.0000114 ↗
11. Effectiveness of fabric-reinforced cementitious matrix in strengthening reinforced concrete beams10.1061/(ASCE)CC.1943-5614.0000741 ↗
12. Flexural strengthening of RC beams with cement-based composites10.1061/(ASCE)CC.1943-5614.0000218 ↗
13. Prediction of flexural capacity of RC beams strengthened in flexure with FRP fabric and cementitious matrix10.1155/2015/868541 ↗
14. Effect of the fiber type and axial stiffness of FRCM on the flexural strengthening of RC beams10.3390/fib5010002 ↗
15. Innovative repair of severely corroded T-beams using fabric-reinforced cementitious matrix10.1061/(ASCE)CC.1943-5614.0000641 ↗
16. Experimental comparison of reinforced concrete beams strengthened against bending with different types of cementitious-matrix composite materials10.1016/j.conbuildmat.2017.01.106 ↗
17. Flexural strengthening of RC beams using textile reinforced mortar–experimental and numerical study10.1016/j.compstruct.2012.09.053 ↗
18. Flexural strengthening of reinforced concrete beams with high-strength steel wire and engineered cementitious composites10.1016/j.conbuildmat.2020.119284 ↗
19. Flexural analysis of reinforced concrete beams strengthened with a cement based high strength composite material10.1016/j.compstruct.2011.07.008 ↗
20. Flexural strengthening of RC beams with an externally bonded fabric-reinforced cementitious matrix10.1061/(ASCE)CC.1943-5614.0000473 ↗
21. A novel and effective anchorage system for enhancing the flexural capacity of RC beams strengthened with FRCM composites10.1016/j.compstruct.2018.10.110 ↗
22. The effectiveness of FRCM-U-wrap joist: an alternative solution in flexural strengthening of reinforced concrete beams10.1080/15376494.2018.1556825 ↗
23. Textile-reinforced mortar (TRM) versus fibre-reinforced polymers (FRP) in flexural strengthening of RC beams10.1016/j.conbuildmat.2017.05.023 ↗
24. Flexural behavior of RC beams strengthened with steel-FRCM composite10.1016/j.engstruct.2016.09.006 ↗
25. Strengthening of concrete structures with textile reinforced mortars: state-of-the-art review
26. Design provisions for FRCM systems bonded to concrete and masonry elements10.1016/j.compositesb.2018.01.033 ↗
27. Flexural behaviour of RC members strengthened with FRCM: state-of-the-art and predictive formulas10.1016/j.compositesb.2018.04.051 ↗
28. JSCE guidelines for concrete · 2007
29. AC434. Acceptance Criteria for Masonry and Concrete Strengthening Using Fabric-reinforced Cementitious Matrix (FRCM) and Steel Reinforced Grout (SRG) Composite Systems. ICC Evaluation Service, 2016.
30. Estimation of a matrix-fiber interface cohesive material law in FRCM-concrete joints10.1016/j.compstruct.2018.03.005 ↗
31. Investigation of bond behavior of polyparaphenylene benzobisoxazole fiber-reinforced cementitious matrix-concrete interface
32. Analysis of the bond between fabric reinforced cementitious mortar (FRCM) strengthening systems and concrete10.1016/j.compositesb.2014.10.027 ↗
33. Effect of the inherent eccentricity in single-lap direct-shear tests of PBO FRCM-concrete joints10.1016/j.compstruct.2016.01.076 ↗
34. Bond characteristics of carbon fabric-reinforced cementitious matrix in double shear tests10.1016/j.conbuildmat.2015.10.017 ↗
35. Bond between textile-reinforced mortar (TRM) and concrete substrates: experimental investigation10.1016/j.compositesb.2016.05.041 ↗
36. Influence of the substrate characteristics on the bond behavior of PBO FRCM-concrete joints10.1016/j.conbuildmat.2015.10.045 ↗
37. Interface modeling approach for the study of the bond behavior of FRCM strengthening systems10.1016/j.compositesb.2017.12.052 ↗
38. Bond characteristics of different FRCM systems10.1016/j.conbuildmat.2018.04.216 ↗
39. Intermediate crack-induced debonding in RC beams and slabs10.1016/S0950-0618(03)00043-6 ↗
40. A solution for sea-sand reinforced concrete beams10.1016/j.conbuildmat.2019.01.146 ↗
41. Effect of corrosion damage on the flexural performance of RC beams strengthened with FRCM composites10.1016/j.compstruct.2017.08.069 ↗
42. Post-repair flexural performance of corrosion-damaged beams rehabilitated with fabric-reinforced cementitious matrix (FRCM)10.1016/j.conbuildmat.2018.01.128 ↗
43. New Italian guidelines for design of externally bonded Fabric-Reinforced Cementitious Matrix (FRCM) systems for repair and strengthening of masonry and concrete structures10.1016/j.prostr.2018.11.027 ↗
44. Experimental analysis on bond between PBO-FRCM strengthening materials and concrete10.1016/j.compositesb.2012.03.011 ↗
45. Tensile behaviour of carbon fabric reinforced cementitious matrix composites as both strengthening and anode materials10.1016/j.compstruct.2019.111675 ↗
46. ASTM D4018. Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows. American Society for Testing and Materials, West Conshohocken, Pennsylvania, United States; 1999.
47. BS EN 196-1. Methods of testing cement–Part 1: determination of strength. British Standards Institution-BSI and CEN European Committee for Standardization; 2005.
48. A hybrid bonding system for improving the structural performance of FRP flexurally strengthened concrete beams10.1260/136943309790327671 ↗
49. Contribution of U-shaped strips to the flexural capacity of low-strength reinforced concrete beams strengthened with carbon fibre composite sheets10.1016/j.compositesb.2012.09.036 ↗
50. ACI 318. Building code requirements for structural concrete and commentary. American Concrete Institute, Farmington Hills, MI, U.S.A.; 2014.
51. Comparison between organic and inorganic matrices for RC beams strengthened with carbon fiber sheets10.1061/(ASCE)1090-0268(2007)11:5(507) ↗
52. Flexural analysis and design of FRCM-strengthened RC beams10.1016/j.conbuildmat.2020.118371 ↗