journal article·2020-08

Effect of cellulose nanofibers from cassava pulp on physical properties of poly(lactic acid) biocomposites

Thanh Chi Nguyen, Chaiwat Ruksakulpiwat, Yupaporn Ruksakulpiwat

Publisher page

Abstract

Biocomposites of poly(lactic acid) (PLA) and cellulose nanofibers (CNFs) extracted from cassava pulp were successfully prepared by melt mixing in an internal mixer. CNFs were prepared from cassava pulp by submitting to alkali hydrolysis, bleaching treatment, and acid hydrolysis. The compatibility between CNFs and PLA matrix was improved using glycidyl methacrylate (GMA) grafted PLA (PLA-g-GMA) as an effective compatibilizer. Higher elongation at break and impact strength of PLA/PLA-g-GMA/CNFs biocomposites was achieved compared to that of neat PLA. PLA-g-GMA shows a strong effect on the crystallization behavior of the biocomposites. The PLA/PLA-g-GMA/CNFs biocomposites induce cold crystallization to take place at lower temperature. Higher degree of crystallinity of PLA/PLA-g-GMA/CNFs biocomposites was obtained compared to PLA/CNFs biocomposites. The mechanical and thermal properties of PLA/CNFs biocomposites at various ratios were investigated. With increasing CNFs contents, the modulus of the biocomposites increases. Thermal stability of PLA/CNFs and PLA/PLA-g-GMA/CNFs biocomposites did not change significantly compared to that of neat PLA.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: biodegradable polymer synthesis and properties · Advanced Cellulose Research Studies · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

School of Polymer Engineering, Institute of Engineering, Suranaree University of Technology, Nakhon Ratchasima, Thailand

References (34)

Show source-provided references
1. 10.1016/j.carbpol.2013.10.05510.1016/j.carbpol.2013.10.055 ↗
2. 10.1016/j.compscitech.2010.07.00510.1016/j.compscitech.2010.07.005 ↗
3. 10.1016/j.biortech.2010.05.09210.1016/j.biortech.2010.05.092 ↗
4. 10.1016/j.progpolymsci.2006.03.00210.1016/j.progpolymsci.2006.03.002 ↗
5. 10.1002/biot.20100013510.1002/biot.201000135 ↗
6. 10.1016/j.compositesa.2009.04.00310.1016/j.compositesa.2009.04.003 ↗
7. 10.1016/S0266-3538(03)00096-410.1016/S0266-3538(03)00096-4 ↗
8. 10.1016/j.compositesa.2011.07.00310.1016/j.compositesa.2011.07.003 ↗
9. 10.1002/pc.2239010.1002/pc.22390 ↗
10. 10.1007/s10853-012-6443-x10.1007/s10853-012-6443-x ↗
11. 10.1021/bm901186u10.1021/bm901186u ↗
12. 10.1002/app.3636010.1002/app.36360 ↗
13. Qu P · BioResources · 2010 · 5 · 181110.15376/biores.5.3.1811-1823 ↗
14. 10.1007/s10853-011-6093-410.1007/s10853-011-6093-4 ↗
15. 10.1002/pc.2223610.1002/pc.22236 ↗
16. 10.1016/j.eurpolymj.2013.07.01710.1016/j.eurpolymj.2013.07.017 ↗
17. 10.1039/C5RA00894H10.1039/C5RA00894H ↗
18. 10.1007/s10570-014-0476-z10.1007/s10570-014-0476-z ↗
19. 10.1016/j.carbpol.2012.08.05410.1016/j.carbpol.2012.08.054 ↗
20. 10.1002/pc.2241310.1002/pc.22413 ↗
21. 10.1021/am400507210.1021/am4005072 ↗
22. 10.1163/15685540778210651910.1163/156855407782106519 ↗
23. 10.1016/j.carbpol.2013.03.09110.1016/j.carbpol.2013.03.091 ↗
24. 10.1016/j.compscitech.2017.02.03210.1016/j.compscitech.2017.02.032 ↗
25. Nguyen TC · Walailak J Sci Technol (WJST) · 2016 · 13 · 1037
26. 10.1002/masy.20140009610.1002/masy.201400096 ↗
27. 10.1016/j.compositesb.2007.11.00910.1016/j.compositesb.2007.11.009 ↗
28. 10.1016/j.compositesb.2009.04.01310.1016/j.compositesb.2009.04.013 ↗
29. 10.1016/j.polymer.2010.04.00710.1016/j.polymer.2010.04.007 ↗
30. 10.1007/s12221-009-0077-x10.1007/s12221-009-0077-x ↗
31. 10.1007/s11814-008-0101-710.1007/s11814-008-0101-7 ↗
32. 10.1002/polb.1067410.1002/polb.10674 ↗
33. 10.1016/j.compscitech.2010.01.01810.1016/j.compscitech.2010.01.018 ↗
34. 10.15376/biores.7.2.1643-165510.15376/biores.7.2.1643-1655 ↗