Compressive response and energy absorption of all-composite sandwich panels with channel cores
Source abstract
Abstract
The novel all-composite sandwich panel with channel core was proposed for simultaneous compressive strength and energy absorption characteristic subjected to quasi-static out-of-plane compression. The structure was composed of carbon fiber reinforced polymer (CFRP) face-sheets and channel core. The compressive responses and deformation mechanism of the proposed structure were studied by the method of experiment and finite element analyses (FEA). Meanwhile, the sandwich panel with traditional corrugated core was also considered and fabricated, as comparison. In contrast to sandwich panel with traditional corrugated core, the proposed structure exhibited a progressive crushing mode, indicating the compressive strength and specific energy absorption were increased by 209.03% and 718.32%. Compared with different damage modes, the damage mode of delamination makes sandwich panel with channel core exhibit much better compressive strength and specific energy absorption. Besides, the method of foam filling is also considered to improve structural efficiency further by offering support and constraint of boundary condition. The compressive strength and specific energy absorption of foam filled sandwich panel with channel increase by 89.19% and 29.28% respectively. Due to good structural efficiency, the proposed structure had wide potential applications in lightweight fields.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Mechanical Behavior of Composites · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. Mechanical properties of corrugated composites for candidate materials of flexible wing structures10.1016/j.compositesa.2005.10.015 ↗
2. Fabrication and mechanical behaviors of carbon fiber reinforced composite fold-core based on curved-crease origami10.1016/j.compscitech.2019.02.019 ↗
3. Mechanical response of carbon/epoxy composite sandwich structures with three-dimensional corrugated cores10.1016/j.compscitech.2018.01.015 ↗
4. Quasi-static axial crushing of single wall corrugated paperboard10.1016/j.compstruct.2019.111237 ↗
5. Sound transmission loss of composite and sandwich panels in thermal environment10.1016/j.compositesb.2017.09.023 ↗
6. On the structural parameters of honeycomb-core sandwich panels against low-velocity impact10.1016/j.compositesb.2021.108881 ↗
7. Broadband low-frequency vibration attenuation in 3D printed composite meta-lattice sandwich structures10.1016/j.compositesb.2021.108772 ↗
8. Controlling distribution of multi-walled carbon nanotube on surface area of Poly(ε-caprolactone) to form sandwiched structure for high-efficiency electromagnetic interference shielding10.1016/j.compositesb.2020.108121 ↗
9. Fatigue Behavior of Composite Sandwich Panels Under Three Point Bending Load10.1016/j.polymertesting.2020.106795 ↗
10. Improvement of load carrying capacity of sandwich composites by different patch repair types10.1016/j.polymertesting.2018.10.039 ↗
11. The mechanical behaviour of spherical egg-box sandwich structures10.1016/j.polymertesting.2019.105954 ↗
12. An experimental study on the compressive response of CFRP honeycombs with various cell configurations10.1016/j.compositesb.2019.01.044 ↗
13. Compressive deformation and energy-absorption capability of aluminium honeycomb core10.1016/j.compstruct.2017.04.056 ↗
14. Effects of geometric configurations of corrugated cores on the local impact and planar compression of sandwich panels10.1016/j.compositesb.2018.08.130 ↗
15. Dynamic response of clamped sandwich beams with fluid-filled corrugated cores10.1016/j.ijimpeng.2020.103533 ↗
16. Crashworthiness analysis of two-layered corrugated sandwich panels under crushing loading10.1016/j.tws.2018.09.008 ↗
17. Bending behavior of composite sandwich structures with graded corrugated truss cores10.1016/j.compstruct.2017.11.043 ↗
18. Fabrication and mechanical behaviors of corrugated lattice truss composite sandwich panels10.1016/j.compscitech.2016.02.003 ↗
19. Mechanical behavior and failure of composite pyramidal truss core sandwich columns10.1016/j.compositesb.2010.12.021 ↗
20. The edgewise compressive behavior and failure mechanism of the composite Y-frame core sandwich column10.1016/j.polymertesting.2019.106188 ↗
21. Experimental and numerical study of foam filled corrugated core steel sandwich structures subjected to blast loading10.1016/j.compstruct.2013.11.016 ↗
22. Energy-absorption characteristics of tube-reinforced absorbent honeycomb sandwich structure10.1016/j.compstruct.2020.112946 ↗
23. Three-point bending of sandwich beams with aluminum foam-filled corrugated cores10.1016/j.matdes.2014.04.014 ↗
24. Impact response of aluminum corrugated core sandwich panels10.1016/j.ijimpeng.2013.06.005 ↗
25. Experimental investigation of the static behaviour of a corrugated plywood sandwich core10.1016/j.compstruct.2018.09.094 ↗
26. Low-velocity impact response and post-impact flexural behaviour of composite sandwich structures with corrugated cores10.1016/j.compstruct.2018.01.024 ↗
27. Experimental study on crashworthiness of empty/aluminum foam/honeycomb-filled CFRP tubes10.1016/j.compstruct.2016.06.019 ↗
28. Compressive strength and energy absorption of sandwich panels with aluminum foam-filled corrugated cores10.1016/j.compscitech.2013.07.011 ↗
29. The energy-absorbing behaviour of composite tube-reinforced foams10.1016/j.compositesb.2017.11.066 ↗
30. Enhancement by Metallic Tube Filling of the Mechanical Properties of Electromagnetic Wave Absorbent Polymethacrylimide Foam10.3390/polym11020372 ↗
31. Crushing response of square aluminium tubes filled with polyurethane foam and aluminium honeycomb10.1016/j.tws.2016.10.023 ↗
32. Fabrication and structural performance of periodic cellular metal sandwich structures10.1016/S0266-3538(03)00266-5 ↗
33. Out-of-plane compression of Ti-6Al-4V sandwich panels with corrugated channel cores10.1016/j.matdes.2017.10.055 ↗
34. Free vibration behavior of Ti-6Al-4V sandwich beams with corrugated channel cores: Experiments and simulations10.1016/j.tws.2018.11.008 ↗
35. A microwave absorption/transmission integrated sandwich structure based on composite corrugation channel: Design, fabrication and experiment10.1016/j.compstruct.2019.111425 ↗
36. Effect of triggering and polyurethane foam-filler on axial crushing of natural flax/epoxy composite tubes10.1016/j.matdes.2013.11.068 ↗
37. Investigating the crushing behavior of quasi-static oblique loading on polymeric foam filled pultruded composite square tubes10.1016/j.compositesb.2016.04.027 ↗
38. The energy-absorbing characteristics of composite tube-reinforced foam structures10.1016/j.compositesb.2014.01.018 ↗
39. Finite element modelling of the progressive crushing of braided composite tubes under axial impact10.1016/j.ijimpeng.2009.09.005 ↗
40. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗