journal article·2021-04

Effects of matrix cracks on delamination of composite laminates subjected to low-velocity impact

Tian Ouyang, Wei Sun, Rui Bao, Riming Tan

Publisher page

Abstract

Abstract This paper investigates delamination mechanisms of composite laminates subjected to low-velocity impact. To obtain delamination data between plies with different fiber orientations, thermal-deply tests were conducted on quasi-isotropic laminates after low-velocity impact. Regularities of delamination positions in different interfaces as well as the matrix cracks distribution through the laminate thickness were analyzed. It is found that delamination positions are influenced by matrix cracks and the distribution of matrix cracks is determined by the out-of-plane shear stress distribution. To illustrate the formation process of delamination, a novel micro-block finite element model was established. It is revealed that due to the interaction between adjacent cracks, inter-laminar cracks growing towards each other show higher stress intensity factors and are thus more likely to form delamination. This crack propagation pattern eventually leads to the formation of two centrosymmetric fan-shaped delaminations in each interface.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Analysis of Composite Materials · Textile materials and evaluations

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. Delamination threshold loads for low velocity impact on composite laminates10.1016/S1359-835X(00)00061-0 ↗
2. An efficient approach for damage quantification in quasi-isotropic composite laminates under low speed impact10.1016/j.compositesb.2014.01.033 ↗
3. Delamination buckling: a finite element study with realistic delamination shapes, multiple delaminations and fibre fracture cracks10.1016/j.compositesa.2010.01.019 ↗
4. Failure prediction of T-stiffened composite panels subjected to compression after edge impact10.1016/j.compstruct.2016.12.004 ↗
5. Modelling the interaction between matrix cracking and delamination in carbon–epoxy laminates under low velocity impact10.1016/j.compscitech.2003.08.008 ↗
6. Characterization of fracture modes in stitched and unstitched cross-ply laminates subjected to low-velocity impact and compression after impact loading10.1016/j.ijimpeng.2007.02.009 ↗
7. Damage resistance and damage tolerance of dispersed CFRP laminates: effect of the mismatch angle between plies10.1016/j.compstruct.2013.01.026 ↗
8. Subtle features of delamination in cross-ply laminates due to low speed impact10.1016/j.compscitech.2017.06.021 ↗
9. Research on intralaminar load reversal damage modeling for predicting composite laminates’ low velocity impact responses10.1016/j.compstruct.2019.04.012 ↗
10. Interaction of delaminations and matrix cracks in a CFRP plate, Part I: a test method for model validation10.1016/j.compositesa.2017.09.011 ↗
11. Investigation of the response to low velocity impact and quasi-static indentation loading of particle-toughened carbon-fibre composite materials10.1016/j.compositesa.2015.03.016 ↗
12. Damage sequence in thin-ply composite laminates under out-of-plane loading10.1016/j.compositesa.2016.04.010 ↗
13. Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 1 – Experiments10.1016/j.compstruct.2015.09.061 ↗
14. Experimental and computational study of the damage process in CFRP composite beams under low-velocity impact10.1016/j.compositesa.2016.06.023 ↗
15. Impact resistance and damage characteristics of composite laminates10.1016/S0263-8223(03)00114-4 ↗
16. Delamination prediction in composite laminates under low-velocity impact10.1016/j.compstruct.2015.05.037 ↗
17. An experimental and numerical investigation on low-velocity impact damage and compression-after-impact behavior of composite laminates10.1016/j.compositesb.2018.12.043 ↗
18. A strain-rate-dependent damage model for evaluating the low velocity impact induced damage of composite laminates10.1016/j.compstruct.2018.06.046 ↗
19. Finite element analysis of a modified progressive damage model for composite laminates under low-velocity impact10.1016/j.compstruct.2019.111113 ↗
20. Study on the delamination behavior of thick composite laminates under low-energy impact10.1016/j.compstruct.2017.09.083 ↗
21. Low velocity impact modelling in laminate composite panels with discrete interface elements10.1016/j.ijsolstr.2009.03.010 ↗
22. Failure analysis of CFRP laminates subjected to compression after impact: FE simulation using discrete interface elements10.1016/j.compositesa.2013.08.003 ↗
23. Interaction of inter- and intralaminar damage in scaled quasi-static indentation tests: Part 2 – Numerical simulation10.1016/j.compstruct.2015.09.062 ↗
24. Barely visible impact damage in scaled composite laminates: Experiments and numerical simulations10.1016/j.ijimpeng.2017.06.008 ↗
25. Failure mechanisms and damage evolution of laminated composites under compression after impact (CAI): experimental and numerical study10.1016/j.compositesa.2017.10.026 ↗
26. Simulation of low velocity impact induced inter- and intra-laminar damage of composite beams based on XFEM10.1007/s10443-017-9598-4 ↗
27. Low velocity impact and compression after impact tests on thin carbon/epoxy laminates10.1016/j.compositesb.2011.04.017 ↗
28. Analytical prediction of damage due to large mass impact on thin ply composites10.1016/j.compositesa.2015.02.005 ↗
29. Experimental analysis of damage creation and permanent indentation on highly oriented plates10.1016/j.compscitech.2009.02.029 ↗
30. Damage evolution in unidirectional and cross-ply flax/epoxy laminates subjected to low velocity impact loading10.1016/j.compositesa.2018.06.032 ↗
31. Observations of damage development from compression-after-impact experiments using ex situ micro-focus computed tomography10.1016/j.compscitech.2014.04.008 ↗
32. Mass criterion for wave controlled impact response of composite plates10.1016/S1359-835X(00)00020-8 ↗
33. Effect of size and configuration of 3-point bend bar specimens on J-R curves10.1016/S0022-3115(98)00698-9 ↗
34. Experimental study on the size effect of ultra-high ductile cementitious composites10.1016/j.conbuildmat.2019.117963 ↗
35. Microscopic failure mechanisms of fiber-reinforced polymer composites under transverse tension and compression10.1016/j.compscitech.2012.08.001 ↗
36. Mechanical behavior of unidirectional fiber-reinforced polymers under transverse compression: Microscopic mechanisms and modeling10.1016/j.compscitech.2007.02.001 ↗
37. Compressive strength determined for ultrahigh modulus fiber reinforced composites by [90/0]ns laminates10.1016/j.compstruct.2018.02.033 ↗
38. Compressive failure analysis of unidirectional carbon/epoxy composite based on micro-mechanical models10.1016/j.cja.2017.10.002 ↗
39. Geometry and size effects on fracture trajectory in a limestone rock under mixed mode loading10.1016/j.engfracmech.2010.03.009 ↗
40. A model for the wing crack initiation and propagation of the inclined crack under uniaxial compression10.1016/j.ijrmms.2019.104121 ↗
41. Shear driven delamination propagation in two dimensions10.1016/S1359-835X(97)00015-8 ↗
42. A method for stress intensity factor calculation of infinite plate containing multiple hole-edge cracks10.1016/j.ijfatigue.2011.06.001 ↗
43. Predicting the low velocity impact damage of a quasi-isotropic laminate using EST10.1016/j.compstruct.2020.112530 ↗