journal article·2016-02

Modeling and optimization in tribological parameters of polyether ether ketone matrix composites using D-optimal design

T Rajmohan, K Palanikumar, JP Davim, A Arun Premnath

Publisher page

Abstract

Fiber-reinforced polymer composites are nowadays used in numerous applications due to their good tribological, mechanical, and thermal properties. In the present investigation, the tribological behavior of polyether ether ketone (PEEK) and PEEK reinforced with glass fiber (GF) has been investigated using the pin-on-disk wear tester under dry sliding condition at different applied loads, speeds, and sliding distance. Modeling and optimization of tribological parameters is carried out using response surface methodology (RSM)-based D-optimal design. Tribological parameters such as load, sliding speed, and sliding distance are chosen as numerical factor, and the weight percentage of GF content is considered as the categorical factor. An experimental plan of four-factor (three numerical + one categorical) D-optimal design based on the RSM is employed to carry out the experimental study. The wear performances of PEEK matrix composites are evaluated using the performance indicators such as specific wear rate and coefficient of friction. The morphologies of the worn surfaces are observed using scanning electron microscopy and atomic force microscopy.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Tribology and Wear Analysis · Mechanical Engineering and Vibrations Research · Natural Fiber Reinforced Composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Sri Chandrasekharendra Saraswathi Viswa Maha Vidyalaya University, Enathur, Kanchipuram, Tamil Nadu, India

Sri Sai Ram Institute of Technology, West Tambaram, Chennai, Tamil Nadu, India

Department of Mechanical Engineering, University of Aveiro, Campus Santiago, Aveiro, Portugal

References (33)

Show source-provided references
1. 10.1016/j.wear.2008.08.01510.1016/j.wear.2008.08.015 ↗
2. Bonner WH. Aromatic polyketones and preparation thereof. Patent 3065205, USA, 1962.
3. 10.1108/0036879051061414510.1108/00368790510614145 ↗
4. 10.1016/j.wear.2004.03.00410.1016/j.wear.2004.03.004 ↗
5. 10.1007/s11249-010-9577-510.1007/s11249-010-9577-5 ↗
6. 10.1016/j.matdes.2004.11.00610.1016/j.matdes.2004.11.006 ↗
7. 10.1016/0043-1648(91)90287-510.1016/0043-1648(91)90287-5 ↗
8. Hanchi J · Wear · 1997 · 203
9. 10.1016/j.matdes.2005.07.00710.1016/j.matdes.2005.07.007 ↗
10. 10.1016/S0043-1648(99)00141-610.1016/S0043-1648(99)00141-6 ↗
11. 10.1016/j.wear.2008.11.00310.1016/j.wear.2008.11.003 ↗
12. 10.1108/0036879071075354510.1108/00368790710753545 ↗
13. 10.1016/j.jmatprotec.2007.02.01910.1016/j.jmatprotec.2007.02.019 ↗
14. 10.1016/0043-1648(86)90175-410.1016/0043-1648(86)90175-4 ↗
15. 10.1016/j.triboint.2006.12.00210.1016/j.triboint.2006.12.002 ↗
16. 10.1080/0360255090282450710.1080/03602550902824507 ↗
17. 10.1016/j.compscitech.2013.02.01010.1016/j.compscitech.2013.02.010 ↗
18. 10.1016/j.compscitech.2013.01.00510.1016/j.compscitech.2013.01.005 ↗
19. 10.1016/0266-3538(92)90027-Z10.1016/0266-3538(92)90027-Z ↗
20. 10.1016/j.compscitech.2006.09.00410.1016/j.compscitech.2006.09.004 ↗
21. 10.1007/s11249-006-9037-410.1007/s11249-006-9037-4 ↗
22. 10.1007/s11665-008-9319-010.1007/s11665-008-9319-0 ↗
23. 10.1007/s00170-010-2964-010.1007/s00170-010-2964-0 ↗
24. Myers RH · 2002
25. 10.1016/j.cej.2009.11.03010.1016/j.cej.2009.11.030 ↗
26. 10.1007/s00170-012-4083-610.1007/s00170-012-4083-6 ↗
27. 10.1361/105994906X15073110.1361/105994906X150731 ↗
28. 10.1080/00224065.1980.1198096810.1080/00224065.1980.11980968 ↗
29. 10.1177/002199831036517510.1177/0021998310365175 ↗
30. 10.1016/j.compscitech.2007.04.02410.1016/j.compscitech.2007.04.024 ↗
31. 10.1007/s10853-008-2867-810.1007/s10853-008-2867-8 ↗
32. Rabinowicz E · 1995
33. 10.1361/105994906X15080310.1361/105994906X150803 ↗