Microstructure, mechanical properties and interaction mechanism of seawater sea-sand engineered cementitious composite (SS-ECC) with Glass Fiber Reinforced Polymer (GFRP) bar
Source abstract
Abstract
With increasing demand for sustainable and long-lasting materials, seawater sea-sand engineered cementitious composite (SS-ECC) has emerged as a promising alternative to conventional concrete in near-ocean construction projects. Glass fiber reinforced polymer (GFRP) bar with excellent corrosion resistance is an ideal choice for these applications. This study evaluated the bond performance of GFRP bars embedded in normal-strength ECC with polyvinyl alcohol (PVA) fibers and high-strength ECC with polyethylene (PE) fibers through pull-out tests. Additionally, tests were conducted on GFRP bars in pristine ECC made with freshwater and river sand for comparison. Further investigation explored the structural properties and uncovered load transfer mechanisms. Results indicated that saline content facilitated early cement hydration of normal-strength ECC, resulting in finer pore structure (10.5% lower porosity and 12.5% lower sorptivity), slightly enhanced compressive performance (1.2% higher compressive strength and 8.3% higher elastic modulus), denser microstructure at GFRP-ECC interface (13.7% lower porous transition zone thickness, 19.2% narrower transition zone and 19.7% higher Ca/Si ratio), and superior bond performance (28.3% higher bond strength and 22.6% higher fracture energy). Conversely, saline content imposed a limited impact on the mechanical properties of high-strength ECC, primarily attributed to the ultra-fine microstructure and early strength characteristics exhibited by the silica fume (SF)-based cementitious binder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Concrete and Cement Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. Suitability of sea water for mixing structural concrete exposed to a marine environment10.1016/0958-9465(95)00015-5 ↗
2. Comparing chloride ingress from seawater and NaCl solution in Portland cement mortar10.1016/j.cemconres.2018.09.014 ↗
3. Teng J, Yu T, Dai J, Chen G. FRP composites in new construction: current status and opportunities. In: Proceedings of 7th National Conference on FRP Composites in Infrastructure (Supplementary Issue of Industrial Construction), Hangzhou, China; 2011.
4. Durability study on interlaminar shear behaviour of basalt-, glass-and carbon-fibre reinforced polymer (B/G/CFRP) bars in seawater sea sand concrete environment10.1016/j.conbuildmat.2017.09.045 ↗
5. Long-term durability of basalt-and glass-fibre reinforced polymer (BFRP/GFRP) bars in seawater and sea sand concrete environment10.1016/j.conbuildmat.2017.02.038 ↗
6. Review of the properties of fiber-reinforced polymer-reinforced seawater–sea sand concrete10.1061/(ASCE)MT.1943-5533.0003894 ↗
7. Combined effects of saline solution and moist concrete on long-term durability of GFRP reinforcing bars10.1016/j.conbuildmat.2012.08.021 ↗
8. Bond durability assessment and long-term degradation prediction for GFRP bars to fiber-reinforced concrete under saline solutions10.1016/j.compstruct.2016.11.055 ↗
9. Life cycle cost analysis of structural concrete using seawater, recycled concrete aggregate, and GFRP reinforcement10.1016/j.conbuildmat.2018.04.183 ↗
10. Structural behavior of GFRP reinforced concrete columns under the influence of chloride at casting and service stages10.1016/j.compositesb.2017.10.011 ↗
11. Structural behavior of seawater sea-sand concrete shear wall reinforced with GFRP bars10.1016/j.engstruct.2019.03.101 ↗
12. From micromechanics to structural engineering-the design of cementitous composites for civil engineering applications
13. Matrix design for pseudo-strain-hardening fibre reinforced cementitious composites10.1007/BF02473191 ↗
14. Tensile strain-hardening behavior of polyvinyl alcohol engineered cementitious composite (PVA-ECC)
15. Deformation behavior of fiber-reinforced polymer reinforced engineered cementitious composite (ECC) flexural members under reversed cyclic loading conditions
16. Use of high strength strain-hardening cementitious composites for flexural repair of concrete structures with significant steel corrosion10.1016/j.conbuildmat.2018.02.009 ↗
17. Development of ultra-high performance engineered cementitious composites using polyethylene (PE) fibers10.1016/j.conbuildmat.2017.10.040 ↗
18. Shear strengthening of reinforced concrete beams with high strength strain-hardening cementitious composites (HS-SHCC)10.1617/s11527-020-01537-1 ↗
19. Applications and recommendations of high performance fiber reinforced cement composites with multiple fine cracking (HPFRCC) in Japan10.1617/s11527-009-9541-8 ↗
20. Development of assembled permanent formwork using ultra high toughness cementitious composites10.1177/1369433216634495 ↗
21. Feasibility study of ECC with self-healing capacity applied on the long-span steel bridge deck overlay10.1080/10298436.2017.1356173 ↗
22. Development of lightweight engineered cementitious composite for durability enhancement of tall concrete wind towers10.1016/j.cemconcomp.2018.11.016 ↗
23. Development and testing of precast concrete beam-to-column connections10.1016/j.engstruct.2013.07.021 ↗
24. Seismic performance of a novel precast concrete beam-column connection using low-shrinkage engineered cementitious composites10.1016/j.conbuildmat.2018.10.103 ↗
25. An investigation on the behavior of a new connection for precast structures under reverse cyclic loading10.1016/j.engstruct.2018.05.041 ↗
26. Application of high-strength strain-hardening cementitious composites (SHCC) in the design of novel inter-module joint10.1016/j.conbuildmat.2022.129491 ↗
27. Influence of Material Ductility on Performance of Concrete Repair
28. Novel cement-based composites for the strengthening and repair of concrete structures10.1016/j.conbuildmat.2012.11.117 ↗
29. Strengthening of reinforced concrete structure using sprayable fiber-reinforced cementitious composites with high ductility10.1016/j.compstruct.2019.04.061 ↗
30. Shear strengthening of fire damaged RC beams with stirrup reinforced engineered cementitious composites10.1016/j.engstruct.2020.110263 ↗
31. Seismic response of exterior RC column-to-steel beam connections10.1061/(ASCE)0733-9445(2000)126:10(1113) ↗
32. Application of Engineered Cementitious Composites (ECC) in interior beam–column connections for enhanced seismic resistance10.1016/j.engstruct.2014.03.026 ↗
33. Mechanical behaviors of steel reinforced ECC or ECC/concrete composite beams under reversed cyclic loading10.1061/(ASCE)MT.1943-5533.0000935 ↗
34. Compressive behavior of engineered cementitious composites under high strain-rate loading10.1061/(ASCE)MT.1943-5533.0001781 ↗
35. Corrosion resistance performance of steel-reinforced engineered cementitious composite beams
36. Cracking and healing of engineered cementitious composites under chloride environment
37. Effectiveness of UHPFRC cover in delaying bar corrosion10.1016/j.conbuildmat.2020.121288 ↗
38. Durability and self-healing of engineered cementitious composites exposed to simulated sewage environments10.1016/j.cemconcomp.2022.104500 ↗
39. Fatigue enhancement of concrete beam with ECC layer10.1016/j.cemconres.2007.01.015 ↗
40. Progressive collapse resistance of precast beam–column sub-assemblages with engineered cementitious composites10.1016/j.engstruct.2015.04.034 ↗
41. Seawater sea-sand engineered/strain-hardening cementitious composites (ECC/SHCC): Assessment and modeling of crack characteristics10.1016/j.cemconres.2020.106292 ↗
42. Experimental study on the mechanical properties of different fiber-reinforced seawater sea-sand engineered cementitious composites10.1016/j.conbuildmat.2021.124562 ↗
43. Feasibility of using seawater to produce ultra-high ductile cementitious composite for construction without steel reinforcement10.1002/suco.201800116 ↗
44. Seawater sea-sand engineered cementitious composites (SS-ECC) for marine and coastal applications10.1016/j.coco.2020.04.019 ↗
45. High-strength seawater sea-sand Engineered Cementitious Composites (SS-ECC): Mechanical performance and probabilistic modeling10.1016/j.cemconcomp.2020.103740 ↗
46. Compression-shear performance and failure criteria of seawater sea-sand engineered cementitious composites with polyethylene fibers10.1016/j.conbuildmat.2022.128386 ↗
47. Mechanical behaviors and failure criteria of seawater sea-sand engineered cementitious composites under combined tension and shear10.1016/j.jobe.2022.104552 ↗
48. Prediction of the creep rupture strength of GFRP bars10.1016/j.conbuildmat.2019.08.001 ↗
49. Bond strength of GFRP bars to high strength and ultra-high strength fiber reinforced seawater sea-sand concrete (SSC)10.1016/j.compstruct.2021.115013 ↗
50. ECCs/UHPFRCCs with and without FRP reinforcement for structural strengthening/repairing: A state-of-the-art review10.1016/j.conbuildmat.2021.125824 ↗
51. Bond behavior and failure mechanism of fiber-reinforced polymer bar-engineered cementitious composite interface10.1016/j.engstruct.2021.112520 ↗
52. Flexural behaviors of glass fiber-reinforced polymer (GFRP) reinforced engineered cementitious composite beams
53. Engineered cementitious composites for effective FRP-strengthening of RC beams10.1016/j.compscitech.2004.11.007 ↗
54. Influence of matrix ductility on tension-stiffening behavior of steel reinforced engineered cementitious composites (ECC)
55. Tension lap splices strengthened with ultrahigh-performance fiber-reinforced concrete10.1061/(ASCE)MT.1943-5533.0001169 ↗
56. T. Kanakubo and H. Hosoya, “Bond-splitting strength of reinforced strain-hardening cement composite elements with small bar spacing,” ACI Structural Journal, vol. 112, no. 2, 2015.10.14359/51687228 ↗
57. Bond behavior of steel reinforcement in high-performance fiber-reinforced cementitious composite flexural members10.1617/s11527-014-0475-4 ↗
58. Experimental investigation of bond stress distribution and bond strength in unconfined UHPFRC lap splices under direct tension10.1016/j.cemconcomp.2016.08.004 ↗
59. Bond behavior and interface modeling of reinforced high-performance fiber-reinforced cementitious composites10.1016/j.cemconcomp.2017.07.017 ↗
60. Bond behavior between steel bar and engineered cementitious composite (ECC) considering lateral FRP confinement: Test and modeling10.1016/j.compstruct.2019.111206 ↗
61. Experimental and numerical investigation on bond between steel rebar and high-strength strain-hardening cementitious composite (SHCC) under direct tension10.1016/j.cemconcomp.2020.103666 ↗
62. Bond behavior between reinforcement and ultra-high toughness cementitious composite in flexural members10.1016/j.engstruct.2020.110357 ↗
63. Bond between carbon fibre-reinforced polymer (CFRP) bars and ultra high performance fibre reinforced concrete (UHPFRC): Experimental study10.1016/j.conbuildmat.2010.02.006 ↗
64. Flexural behaviors of ECC and concrete/ECC composite beams reinforced with basalt fiber-reinforced polymer10.1061/(ASCE)CC.1943-5614.0000381 ↗
65. Experimental study on bond behaviour between BFRP bar and engineered cementitious composite10.1016/j.conbuildmat.2015.07.135 ↗
66. Flexural behavior of basalt FRP reinforced ECC and concrete beams10.1016/j.conbuildmat.2017.03.087 ↗
67. Bond strength of GFRP bars embedded in engineered cementitious composite using RILEM beam testing10.1186/s40069-018-0240-0 ↗
68. K. M. Hossain, S. Alam, M. S. Anwar and K. M. Julkarnine, “Bond strength of fibre-reinforced polymer bars in engineered cementitious composites,” Proceedings of the Institution of Civil Engineers-Construction Materials, vol. 173, no. 1, pp. 15-27, 2020.10.1680/jcoma.17.00020 ↗
69. Analyzing the bond behavior of Fiber-Reinforced Polymer (FRP) bars embedded in Engineered Cementitious Composites (ECCs) with the nonlocal continuum rod model
70. Stochastic modeling and design recommendations for bond of UHPC interfaced with steel, FRP reinforcing bars10.1016/j.conbuildmat.2023.130297 ↗
71. “ACI 440.3R-12. Guide Test Methods for Fiber-Reinforced Polymer”.
72. “ASTM D2584-18. Standard Test Method for Ignition Loss of Cured Reiforced Resins”.
73. “ASTM D7205/D7205M-06. Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars”.
74. “ASTM D4476/D4476M-14. Standard Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods”.
75. “ASTM D4475-02. Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods by the Short-Beam Method”.
76. “ASTM D1141-98. Standard Practice for the Preparation of Substitute Ocean Water”.
77. “BS EN 206:2014. Concrete—Specification, Performance, Production and Conformity”.
78. “ASTM C618. Standard Specification for Coal Ash and Raw or Calcined Natural Pozzolan for Use in Concrete”.
79. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers10.1016/j.cemconres.2017.04.004 ↗
80. Li · 2019
81. Evaluation of crack opening performance of a repair material with strain hardening behavior10.1016/j.cemconcomp.2008.08.003 ↗
82. Composite Properties of High-Strength, High-Ductility Concrete
83. Micromechanics of high-strength, high-ductility concrete
84. “ASTM C1585-2013. Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes”.
85. “BS EN 196-1:2016, Methods of testing cement - Part 1: Determination of strength”.
86. “Concrete Engineering Series 82, Design and construction of high performance,” Japan: Concrete Committee, Japan Society of Civil Engineers, 2008.
87. “ASTM D7913-14. Standard Test Method for Bond Strength of Fiber-Reinforced Polymer Matrix Composite Bars to Concrete by Pullout Testing”.
88. Quantification of steel-concrete interface in reinforced concrete using backscattered electron imaging technique10.1016/j.conbuildmat.2018.05.246 ↗
89. The evolution of interfacial transition zone in alkali-activated fly ash-slag concrete10.1016/j.cemconres.2019.105963 ↗
90. Influence of the Ca/Si ratio on the compressive strength of cementitious calcium–silicate–hydrate binders10.1039/C7TA06104H ↗
91. Improving bond of fiber-reinforced polymer bars with concrete through incorporating nanomaterials10.1016/j.compositesb.2022.109960 ↗
92. Early strength behaviour of fly ash concretes10.1016/0008-8846(94)90053-1 ↗
93. Early microstructure development of activated lime-fly ash pastes10.1016/0008-8846(96)00123-8 ↗
94. Degree of hydration and gel/space ratio of high-volume fly ash/cement systems10.1016/S0008-8846(00)00213-1 ↗
95. Prediction model of compressive strength development of fly-ash concrete10.1016/j.cemconres.2004.04.009 ↗
96. Influence of silica fume on the microstructural development in cement mortars10.1016/0008-8846(85)90040-7 ↗
97. Role of silica fume in compressive strength of cement paste, mortar, and concrete
98. The influence of silica fume on the compressive strength of cement paste and mortar10.1016/0008-8846(95)00152-3 ↗
99. Factors influencing strength development of concrete containing silica fume10.1016/0008-8846(95)00150-B ↗
100. Multiscale investigations on hydration mechanisms in seawater OPC paste10.1016/j.conbuildmat.2018.10.010 ↗