journal article·2019-06Open access

Effect of delamination on the fatigue life of GFRP: A thermographic and numerical study

Chiara Colombo, Trunal Bhujangrao, Flavia Libonati, Laura Vergani

Abstract

Abstract Delamination is the major failure mechanism in composite laminates and eventually leads to material failure. An early-detection and a better understanding of this phenomenon, through non-destructive assessment, can provide a proper in situ repair and allow a better evaluation of its effects on residual strength of lightweight structural components. Here we adopt a joint numerical-experimental approach to study the effect of delamination on the fatigue life of glass/epoxy composites. To identify and monitor the evolution of the delamination during loading, we carried out stepwise cyclic tests coupled with IR-thermography on both undamaged and artificially-damaged samples. The outcome of the tests shows that IR-thermography is able to identify a threshold stress, named damage stress σ D , which is correlated to the damage initiation and the fatigue performance of the composite. Additionally, we performed FE-simulations, implementing the delamination by cohesive elements . Such models, calibrated on the basis of the experimental fatigue results, can provide a tool to assess the effect of parameters, such as the delamination size and location and composite stacking sequence, on the residual strength and fatigue life of the composite material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermography and Photoacoustic Techniques · Mechanical Behavior of Composites · Fire effects on concrete materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. The role of delamination in failure of fibre-reinforced composites10.1098/rsta.2011.0441 ↗
2. Effect of interlayer delamination on mechanical behavior of carbon/epoxy laminates10.1177/0021998309344649 ↗
3. An energy based failure criterion for matrix crack induced delamination in laminated composite structures10.1016/j.compstruct.2014.02.015 ↗
4. A benchmark study of simulation methods for high-cycle fatigue-driven delamination based on cohesive zone models10.1016/j.compstruct.2016.11.081 ↗
5. Quantitative analysis of the influence of voids and delaminations on acoustic attenuation in CFRP composites by the laser-ultrasonic spectroscopy method10.1016/j.compositesb.2013.08.040 ↗
6. A review of non-destructive testing methods of composite materials10.1016/j.prostr.2016.02.008 ↗
7. Applications of infrared thermography in nondestructive evaluation
8. Ibarra-Castanedo C, Galmiche F, Darabi A, Pilla M, Klein M, Ziadi A, et al. Thermographic nondestructive evaluation: overview of recent progress. In: Cramer KE, Maldague XP, editors. Proceeding SPIE, SPIE; 2003, p. 450. doi:10.1117/12.485699.10.1117/12.485699 ↗
9. Brémond P, New developments in Thermo Elastic Stress Analysis by Infrared Thermography. IV Conf. Panam. END, Buenos Aires: 2007.
10. An investigation of the influence of macroscopic heterogeneity on the thermoelastic response of fibre reinforced plastics10.1016/j.compscitech.2004.07.008 ↗
11. Review of active IR thermography for detection and characterization of defects in reinforced concrete10.3390/jimaging2020011 ↗
12. Early fatigue damage detection in composite materials10.1177/002199837500900409 ↗
13. Introduction to thermoelastic stress analysis10.1111/j.1475-1305.1999.tb01123.x ↗
14. A new rapid thermographic method to assess the fatigue limit in GFRP composites10.1016/j.compositesb.2016.08.007 ↗
15. Applications of thermoelastic stress analysis10.1111/j.1475-1305.1986.tb00014.x ↗
16. The use of a second harmonic correlation to detect damage in composite structures using thermoelastic stress measurements10.1046/j.1475-1305.2003.00056.x ↗
17. Static and fatigue characterisation of new basalt fibre reinforced composites10.1016/j.compstruct.2011.10.007 ↗
18. Thermo-mechanical behaviour of flax-fibre reinforced epoxy laminates for industrial applications10.3390/ma8115384 ↗
19. Thermographic stepwise assessment of impact damage in sandwich panels10.1016/j.compstruct.2017.10.001 ↗
20. Prediction of delamination growth in laminated composites using acoustic emission and Cohesive Zone Modeling techniques10.1016/j.compstruct.2015.01.003 ↗
21. The effect of delaminations on local buckling in wind turbine blades10.1016/j.renene.2015.06.053 ↗
22. Stochastic modeling of delamination growth in unidirectional composite DCB specimens using cohesive zone models10.1016/j.compstruct.2013.01.020 ↗
23. Camanho PP, Dávila CG. Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials. 2002. doi: 10.1177/002199803034505.
24. Cohesive element analysis of fatigue delamination propagation in composite materials with improved crack tip tracking algorism10.1016/j.compstruct.2015.07.118 ↗
25. On the parametric sensitivity of cohesive zone models for high-cycle fatigue delamination of composites10.1016/j.ijsolstr.2015.10.015 ↗
26. Detection and characterisation of delamination damage propagation in Woven Glass Fibre Reinforced Polymer Composite using thermoelastic response mapping10.1016/j.compstruct.2016.06.044 ↗
27. Fatigue damage in GFRP10.1108/17579861211281218 ↗
28. Influence of delamination on fatigue properties of a fibreglass composite10.1016/j.compstruct.2013.07.028 ↗
29. Simpson RL. Review of Springer Handbook of Experimental Fluid Mechanics. In: Jr WNS, Sharpe WN, editors. AIAA J., vol. 46, Springer; 2008, p. 2653–2655. doi:10.2514/1.38773.10.2514/1.38773 ↗
30. Calibration-based NUC method in real-time based on IRFPA10.1016/j.phpro.2011.11.058 ↗
31. Assessment of non-adiabatic behaviour in thermoelastic stress analysis of small scale components10.1007/s11340-009-9249-2 ↗
32. Determination of fatigue-related heat emission in composite materials during fatigue loading10.1007/BF02323148 ↗
33. Thermographic methodology for rapid determination of the fatigue limit of materials and mechanical components10.1016/S0142-1123(99)00088-2 ↗
34. LAPOL/UFRGS’s Composite Material and Nanocomposites Group. Mech_Gcomp n.d. https://gcomp-srv01.nuvem.ufrgs.br/en/ (accessed January 10, 2019).
35. Autodesk. Helius PFA n.d. https://knowledge.autodesk.com/support/helius-pfa/ (accessed January 10, 2019).
36. Interlaminar fracture toughness of glass and carbon reinforced multidirectional fiber metal laminates10.1016/j.engfracmech.2017.02.007 ↗
37. A multicontinuum theory for structural analysis of composite material systems10.1016/0961-9526(95)00077-Z ↗
38. Use of infrared thermography to investigate the fatigue behavior of a carbon fiber reinforced polymer composite10.1016/j.compstruct.2012.09.046 ↗