Effect of the stuffer yarns on the mechanical performance of novel 3D woven green composites
Source abstract
Abstract
Abstract Determination of mechanical properties of 3D woven reinforcements is crucial for tailoring the required properties for end application. The current study presents an investigation of the mechanical performance of novel 3D woven composites’ structures. Various 3D woven fabrics with variation in stuffer yarn density were designed, produced and their mechanical properties such as tensile, shear, drop weight impact and compression after impact were investigated. Reinforcements were developed on a modified Dobby loom from flax yarn with four different levels of stuffer yarn densities. Machine modification ensured controlled amount of tension during reinforcement production for similar sets of yarns with similar crimp percentage. Composites were fabricated using these 3D woven fabrics as reinforcement and green epoxy as a matrix. It was observed that the impact and flexural properties are significantly improved by increasing stuffer yarn density.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Natural Fiber Reinforced Composites · Textile materials and evaluations · Additive Manufacturing and 3D Printing Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. Biodegradable composites based on flax/polyhydroxybutyrate and its copolymer with hydroxyvalerate10.1016/j.indcrop.2009.08.005 ↗
2. Composites with hemp reinforcement and bio-based epoxy matrix10.1016/j.compositesb.2014.07.021 ↗
3. A review of natural fiber composites: extraction methods, chemical treatments and applications
4. Recent advancement in the fabrication and characterization of natural fiber reinforced composite: a review
5. Bio-composites: eco-friendly Substitute of Glass Fiber Composites
6. Processing, properties and stability of biodegradable composites based on Mater-Bi® and cellulose fibres10.1002/pat.390 ↗
7. Enhancement of impact toughness and damage behaviour of natural fibre reinforced composites and their hybrids through novel improvement techniques: a critical review10.1016/j.compstruct.2020.113496 ↗
8. Acoustic and mechanical characterisation of polypropylene composites reinforced by natural fibres for automotive applications10.1016/j.jmrt.2020.09.112 ↗
9. Potential of natural fibers in composites for ballistic applications – a review
10. Natural Curaua fiber-reinforced composites in multilayered ballistic armor10.1007/s11661-015-3032-z ↗
11. Ballistic performance of mallow and jute natural fabrics reinforced epoxy composites in multilayered armor10.1590/1980-5373-mr-2016-0927 ↗
12. Mallow fiber-reinforced epoxy composites in multilayered armor for personal ballistic protection10.1007/s11837-017-2495-3 ↗
13. Effect of kenaf fibers on trauma penetration depth and ballistic impact resistance for laminated composites10.1177/0040517516663155 ↗
14. Quasi-static penetration behavior of plain woven kenaf/aramid reinforced polyvinyl butyral hybrid laminates10.1177/1528083717692593 ↗
15. Ballistic impact resistance of plain Woven Kenaf/Aramid reinforced polyvinyl butyral laminated hybrid composite10.15376/biores.11.3.7282-7295 ↗
16. Bioactive woven flax-based composites: development and characterisation10.1177/1528083715591579 ↗
17. Effect of weaving patterns on damage resistance of 3D woven jointless T and H shaped reinforcements
18. Influences of weave parameters on the mechanical behavior and fracture mechanisms of multidirectional angle-interlock 3D woven composites10.1016/j.mtcomm.2019.100886 ↗
19. Effect of off-axis angle on low-velocity impact and compression after impact damage mechanisms of 3D woven composites10.1016/j.matdes.2020.108672 ↗
20. Engineering Design And Mechanical Property Characterisation of 3D warp interlock woven fabrics10.1007/s10443-018-9715-z ↗
21. Influence of 3D warp interlock fabrics parameters made with flax rovings on their final mechanical behaviour10.1177/1528083718808790 ↗
22. Study of changes in 3D-woven multilayer interlock fabric preforms while forming10.1080/00405000.2012.676267 ↗
23. Development & characterization of green composites using Novel 3D woven preforms10.1007/s10443-018-9720-2 ↗
24. Multi-scale analyses of 3D woven composite based on periodicity boundary conditions10.1177/0021998306069891 ↗
25. Effect of interlocking pattern on short beam strength of 3D woven composites10.1177/0021998319839441 ↗
26. Optimization of 3D woven preform for improved mechanical performance10.1177/1528083718760802 ↗
27. Flax roving twisting preparation for weaving and effect of the weft layers number on the physical and mechanical properties of 3D interlock flax fabric10.1007/s42452-020-2047-2 ↗
28. Formability behaviour of 3D woven solid structures with varying stuffer binder ratio
29. Experimental Investigation about stamping behaviour of 3D warp interlock composite preforms10.1007/s10443-013-9369-9 ↗
30. Lansiaux H, Soulat D, Boussu F, Labanieh AR. Warp interlock flax fabrics with different woven architectures for composite applications 2020.10.3390/fib8020015 ↗
31. Experimental investigation of three-dimensional woven composites10.1016/j.compositesa.2015.03.011 ↗
32. Effect of fiber architecture on tensile fracture of 3D woven textile composites10.1016/j.compstruct.2019.111139 ↗
33. Effect of weaving structures on the geometry variations and mechanical properties of 3D LTL woven composites10.1016/j.compstruct.2020.112756 ↗
34. Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites10.1016/j.compositesa.2014.11.012 ↗
35. The mechanical properties of 3D woven composites10.1177/0021998316681187 ↗
36. Composites: Part B Experimental and analytical study on fiber-kinking failure mode of laminated composites10.1016/j.compositesb.2014.01.039 ↗
37. The effect of z-binding yarns on the electrical properties of 3D woven composites10.1016/j.compstruct.2017.09.081 ↗
38. In-plane and through-thickness properties, failure modes, damage and delamination in 3D woven carbon fibre composites subjected to impact loading10.1016/j.compscitech.2011.11.032 ↗
39. Mechanical response of Novel 3D woven flax composites with variation in Z Yarn binding10.1080/15440478.2018.1539939 ↗
40. Improved crush energy absorption in 3D woven composites by pick density modification10.1016/j.compositesb.2020.108007 ↗
41. Analysis of local and global localizations on the failure phenomenon of 3D interlock woven fabrics under ballistic impact10.1016/j.compstruct.2016.09.039 ↗
42. Mechanical behavior and failure micromechanisms of hybrid 3D woven composites in tension10.1016/j.compositesa.2014.01.003 ↗
43. Ballistic performance of hybrid 3D woven composites: experiments and simulations10.1016/j.compstruct.2015.03.021 ↗
44. Low velocity impact properties of 3D woven basalt/aramid hybrid composites10.1016/j.compscitech.2007.06.016 ↗
45. Investigation of the mechanical and forming behaviour of 3D warp interlock carbon woven fabrics for complex shape of composite material
46. Modeling of internal geometry of 3D woven fabrics by computation method10.1080/00405000.2012.720850 ↗
47. Modelling and simulation of 3D orthogonal fabrics for composite applications10.1080/00405000.2012.675682 ↗
48. Impact tolerance of 3D woven nanocomposites: a simulation approach10.1080/00405000.2012.752123 ↗
49. Impact damage of 3D orthogonal woven composite circular plates10.1007/s10443-008-9050-x ↗
50. High-speed visualizing and mesoscale modeling for deformation and damage of 3D angle-interlock woven composites subjected to transverse impacts10.1016/j.ijmecsci.2018.02.044 ↗