journal article·2022-11

A detailed study on the damage evolution and failure assessment of single-lap hybrid joints in CFRP laminates under tensile loading

Isha Paliwal, M. Ramji

Publisher page

Abstract

Hybrid joints have potential to improve the joint strength and efficiency compared to the bonded or bolted joint. Several studies have been performed to understand the influence of various design parameters on the hybrid joint strength. However, very few studies have been reported on the complex failure mechanism of the hybrid joint. In this study, a detailed analysis is carried out to understand the failure mechanism of the hybrid joint in Carbon fiber reinforced plastic (CFRP) laminate having [0/+45/90/?45]s layup sequence under tensile loading both experimentally and numerically. Analysis of a simple bonded and bolted joint configurations are also included for comparison purposes. The acoustic emission (AE) technique is utilized for the damage assessment and the 3D digital image correlation (DIC) technique is used to capture the whole field strain around the bolt region. A detailed fractographic study using a digital optical microscope is also carried out to critically ascertain the presence of differen.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Structural Load-Bearing Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. A review of welding technologies for thermoplastic composites in aerospace applications10.5028/jatm.2012.040303912 ↗
2. Joining composite materials and structures: some thought-provoking possibilities10.1177/0892705704033336 ↗
3. The development and scalability of a high strength, damage tolerant, hybrid joining scheme for composite–metal structures10.1016/j.compositesa.2014.04.018 ↗
4. Hybrid approaches for aircraft primary structure repairs10.1016/j.compstruct.2018.09.038 ↗
5. Crack sensitivity of bolted metallic and polymeric joints10.1016/j.engfracmech.2015.08.005 ↗
6. Investigation of fatigue crack propagation in steel pipeline repaired by glass fiber reinforced polymer10.1016/j.compstruct.2020.112189 ↗
7. Composite patch configuration and prestress effect on SIFs for inclined cracks in steel plates10.1061/(ASCE)ST.1943-541X.0001727 ↗
8. Composite patch configuration and prestraining effect on crack tip deformation and plastic zone for inclined cracks10.1061/(ASCE)CC.1943-5614.0000655 ↗
9. Bonded-bolted composite joints10.2514/3.45237 ↗
10. Improving performance of GFRP/aluminum single lap joints using bolted/co-cured hybrid method10.1016/j.compositesa.2007.11.009 ↗
11. Failure of carbon composite-to-aluminum joints with combined mechanical fastening and adhesive bonding10.1016/j.compstruct.2006.04.013 ↗
12. Experimental and numerical investigation into strength of bolted, bonded and hybrid single lap joints: Effects of adherend material type and thickness10.1016/j.ijadhadh.2018.10.006 ↗
13. Fatigue of hybrid (adhesive/bolted) joints in SRIM composites10.1016/S0143-7496(00)00047-6 ↗
14. Experimental and numerical study of fatigue crack growth of aluminum alloy 2024-T3 single lap simple bolted and hybrid (adhesive/bolted) joints10.1016/j.engfailanal.2015.10.013 ↗
15. Review on the fatigue of composite hybrid joints used in aircraft structures
16. Investigation of bolted/bonded composite joint behaviour using design of experiments10.1016/j.compstruct.2017.02.084 ↗
17. Numerical experimental analysis of hybrid double lap aluminum-CFRP joints10.1016/j.compositesb.2014.11.025 ↗
18. Load transfer in hybrid (bonded/bolted) composite single-lap joints10.1016/j.compstruct.2004.04.016 ↗
19. Analysis and optimization of hybrid double lap aluminum-GFRP joints10.1016/j.compstruct.2014.05.044 ↗
20. Improving load sharing in hybrid bonded/bolted composite joints using an interference-fit bolt10.1016/j.compstruct.2016.04.025 ↗
21. Hybrid bonded-fastened joints and their application in composite structures: A general review10.1177/0731684415627296 ↗
22. Tensile properties of a hybrid bonded/bolted joint: parameter study10.1016/j.compstruct.2020.112329 ↗
23. Effect of adhesive layer compliance on strength of single-lap hybrid bonded-bolted joints10.1016/j.compstruct.2020.113324 ↗
24. 3D-DIC strain field measurements in bolted and hybrid bolted-bonded joints of woven carbon-epoxy composites10.1016/j.compositesb.2021.108875 ↗
25. An experimental study on the mechanical behaviour of bonded and hybrid bonded-bolted composite joints using digital image correlation (DIC) technique10.1016/j.compstruct.2021.114544 ↗
26. Static and fatigue testing thin riveted, bonded and hybrid carbon fiber double lap joints used in aircraft structures10.1016/j.compstruct.2014.11.004 ↗
27. Experimental and finite element studies of bolted, bonded and hybrid step lap joints of thick carbon fibre/epoxy panels used in aircraft structures10.1016/j.compositesb.2016.06.061 ↗
28. Tensile behavior of hybrid multi-bolted/bonded joints in composite laminates10.1016/j.ijadhadh.2019.102426 ↗
29. Damage characterization of adhesively-bonded bi-material joints using acoustic emission10.1016/j.compositesb.2019.107356 ↗
30. Acoustic emission behaviors and damage mechanisms of adhesively bonded single-lap composite joints with adhesive defects10.1177/0731684414563112 ↗
31. Bearing strength and failure behavior of bolted composite joints (part I: Experimental investigation)10.1016/j.compscitech.2005.02.011 ↗
32. A novel method for damage analysis of CFRP single-lap bolted, bonded and hybrid joints under compression10.1016/j.compstruct.2020.112636 ↗
33. D5961/D5961M-13 · 2013
34. A novel approach to analyse adhesive layer strain field in a stepped lap repaired carbon fiber reinforced polymer panel using digital image correlation10.1080/01694243.2016.1264660 ↗
35. Prediction of mechanical behaviour of adhesively bonded CFRP scarf jointed specimen under tensile loading using localised DIC and CZM10.1016/j.ijadhadh.2018.12.002 ↗
36. Damage assessment studies in CFRP composite laminate with cut-out subjected to in-plane shear loading10.1016/j.compositesb.2018.11.142 ↗
37. Study on experimental characterization of carbon fiber reinforced polymer panel using digital image correlation: A sensitivity analysis10.1016/j.optlaseng.2014.04.019 ↗
38. Prediction of failure stages for double lap joints using finite element analysis and artificial neural networks10.1016/j.engfailanal.2019.01.042 ↗
39. Field-testing and numerical simulation of vantage steel bridge
40. Structural behavior of hybrid CFRP/steel bolted staggered joints10.1016/j.conbuildmat.2018.09.179 ↗
41. Progressive damage analysis of multi-bolt composite joints with variable bolt–hole clearances10.1016/j.compositesb.2004.11.003 ↗
42. Failure criteria for unidirectional fiber composites10.1115/1.3153664 ↗
43. A progressive damage model for laminated composites containing stress concentrations10.1177/002199838702100904 ↗
44. A progressive damage model for mechanically fastened joints in composite laminates10.1177/002199839903302402 ↗
45. Snap-buckling and failure studies on CFRP laminate with an embedded circular delamination under flexural loading10.1016/j.compositesb.2021.108739 ↗
46. Cohesive zone with continuum damage properties for simulation of delamination development in fibre composites and failure of adhesive joints10.1016/j.engfracmech.2008.02.010 ↗
47. Evaluation of different modelling conditions in the cohesive zone analysis of single-lap bonded joints10.1080/00218464.2017.1307107 ↗
48. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
49. A unified numerical approach for the simulation of intra and inter laminar damage evolution in stiffened CFRP panels under compression10.1016/j.compositesb.2020.107931 ↗
50. Hybrid bonded-fastened joints and their application in composite structures: A general review10.1177/0731684415627296 ↗
51. Clustering effect on damage mechanisms in open-hole laminated carbon/epoxy composite under constant tensile loading rate, using acoustic emission10.1016/j.compstruct.2018.07.047 ↗