Theoretical, emulation and experimental analysis on auxetic re-entrant octagonal honeycombs and its applications on pedestrian protection of engine hood
Source abstract
Abstract
Abstract In this article, a novel re-entrant octagonal honeycomb (ROH) with negative Poisson's ratio (NPR) configuration is proposed owing to its superior energy absorption and lightweight design performances. Regarding the effects of adjacent unit cells, a mechanics-based homogenization approach is put forward and employed to derive static mechanical properties including elastic modulus and Poisson's ratio of two-dimensional (2D) and three-dimensional (3D) ROHs under axial loading. Based on above, the predominant compression failure mode is explored. Then, the static mechanical properties and finite element model of ROH are validated by experiment and demonstrate high accuracy. Subsequently, to obtain dynamic responses of the ROH under dynamic impact loading, the relations among dynamic plateau stress and quasi-static plateau stress, initial density, dense strain and impact velocities are established under the conditions of mass conservation and momentum theorem based on one-dimensional shock wave theory and ideal rigid-perfectly plastic material model. Besides, dynamic energy absorption models of the ROH under dynamic loading are acquired in consideration of the effects of impact velocities on dense strain, the results show that theoretical models agree quite well with simulation results. On this basis, the application of ROH on automotive energy absorber is studied with the purpose of acquiring superior energy absorption and satisfying lightweight requirements simultaneously. Based on the decoupling thought of stiffness and pedestrian protection, a new design method of carbon fiber reinforced plastics (CFRP) hood with ROH is put forward in consideration of energy absorption and lightweight requirements. Of this, ROH is regarded as sandwich structure to meet the demands of energy absorption, CFRP plates are treated as outer and inner skins to satisfy the needs of stiffness. Firstly, multi-objective optimization models are set up under the constraints of reasonable structural parameters and negative Poisson’s ratio. Then, the NSGA-Ⅱalgorithm is adopted to achieve the optimal Pareto fronts with the targets for maximum unit mass energy absorption and minimum density. Afterwards, the optimization on thicknesses of CFRP layers is carried out to achieve minimum mass under the constraint conditions that the static stiffness of CFRP hood is larger than that of steel hood. In addition, the layering sequence of inner and lower skins are also optimized. Finally, improved overall stiffness, optimized HIC values and similar lightweight space of CFRP hood with ROH are achieved in comparisons with CFRP hood without ROH. Compared with steel hood, the pedestrian protection performance of CFRP hood with ROH is greatly enhanced, 1st free mode increases by 33.9%, and torsional stiffness and bending stiffness increase by 23.1% and 30.8%, respectively. While the weight decreases by 40.1%. The results indicate that the CFRP hood with ROH presents outstanding advantages of pedestrian protection and lightweight design in terms of HIC and stiffness performance.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Automotive and Human Injury Biomechanics · Polymer composites and self-healing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. A gradient cellular core for aeroengine fan blades based on auxetic configurations10.1177/1045389X11414226 ↗
2. Olympio, K.R., Gandhi, F., 2007. Zero-Nu cellular honeycomb flexible skins for one-dimensional wing morphing. In: Proceedings of the 48th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Honolulu, Hawaii April 23–26.10.2514/6.2007-1735 ↗
3. Dynamic properties of high structural integrity auxetic open cell foam10.1088/0964-1726/13/1/006 ↗
4. Uniaxial and buckling mechanical response of auxetic cellular tubes10.1088/0964-1726/22/8/084008 ↗
5. Auxetic materials: functional materials and structures from lateral10.1002/(SICI)1521-4095(200005)12:9<617::AID-ADMA617>3.0.CO;2-3 ↗
6. The in-plane linear elastic constants and out-of-plane bending of 3-coordinated ligament and cylinder ligament honeycombs10.1016/j.compscitech.2009.07.010 ↗
7. Foam structures with a negative Poisson's ratio10.1126/science.235.4792.1038 ↗
8. Flatwise buckling optimization of hexachiral and tetrachiral honeycombs10.1016/j.compscitech.2009.10.022 ↗
9. Molecular network design10.1038/353124a0 ↗
10. Bending deformation of honeycomb consisting of regular hexagonal cells10.1016/j.compstruct.2010.08.006 ↗
11. Equivalent flexural and torsional rigidity of hexagonal honeycomb10.1016/j.compstruct.2011.02.009 ↗
12. On the transverse shear modulus of negative Poisson’s ratio honeycomb structures10.1046/j.1460-2695.2000.00278.x ↗
13. Design and modeling of auxetic and hybrid honeycomb structures for in-plane property enhancement10.1016/j.matdes.2016.12.067 ↗
14. Bending behavior of sandwich composite structures with tunable 3D printed core materials10.1016/j.compstruct.2017.05.001 ↗
15. An isotropic three-dimensional structure with Poisson’s ratio=-110.1007/BF00042531 ↗
16. Effects of cell microtopology on the in-plane dynamic crushing analysis of re-entrant square cellular material10.1007/s42154-018-0005-0 ↗
17. Impact resistance of uniform and functionally graded auxetic double arrowhead honeycombs10.1016/j.ijimpeng.2015.04.005 ↗
18. Elastic properties of two novel auxetic 3D cellular structures
19. Nonlinear shear modulus of re-entrant hexagonal honeycombs under large deformation10.1016/j.ijsolstr.2015.11.015 ↗
20. Plastic analyses of thin-walled steel honeycombs with re-entrant deformation style10.1016/j.msea.2017.01.056 ↗
21. Mechanical properties of 3D re-entrant auxetic cellular structures10.1016/j.ijmecsci.2017.05.048 ↗
22. Mechanical properties of 3D re-entrant honeycomb auxetic structures realized via additive manufacturing[J]. Int J Solids Struct 69–70;2015:475–490.10.1016/j.ijsolstr.2015.05.005 ↗
23. Composites with auxetic inclusions showing both an auxetic behavior and enhancement of their mechanical properties10.1016/j.compstruct.2012.02.026 ↗
24. Homogenized couple stress model of optimal auxetic microstructures computed by topology optimization
25. Reduction of stiffness and mass matrices10.2514/3.2874 ↗
26. Quasi-static failure analysis of honeycomb sandwich beam with composite face sheets10.4028/www.scientific.net/AMR.160-162.855 ↗
27. YANG Xiaojiang, SHI Weichen. Modulus determination of functionally graded materials based on theories of Euler-Bernoulli beam and Timoshenko beam, Comp Aided Eng 2012;21(5):25–29.
28. Dynamic uniaxial crushing of wood10.1016/S0734-743X(97)00016-X ↗
29. Plastic deformation mechanisms in axially compressed metal tubes used as impact energy absorbers10.1016/0020-7403(93)90054-X ↗
30. About one-dimensional shock propagation in a cellular material10.1016/j.ijimpeng.2005.04.006 ↗
31. Compressive behavior of closed-cell aluminum foams at high strain rates10.1016/j.compositesb.2010.07.005 ↗
32. Nianwen Z. Research on Safety Performance of Vehicle Side Impact[J]. Automobile Applied Technology, 2019.
33. Performance of hood system and head injury criteria subjected to frontal impacts10.4028/www.scientific.net/AMM.165.270 ↗
34. Yücel Can, Yazici M, Harun Gülü. Polymer Foam Core Aluminum Sandwich Lightweight Car Hood for Pedestrian Protection, Acta Physica Polonica 2017;134, 1, 231–234.10.12693/APhysPolA.134.231 ↗
35. Investigation of the hyperelastic material coated steel car hood concerning pedestrian head impact protection using finite element method10.12693/APhysPolA.134.238 ↗
36. Study on engine hood with negative Poisson's ratio architected composites based on pedestrian protection10.4271/2017-01-0368 ↗
37. Theoretical study and simulation analysis on re-entrant square cellular material's mechanical properties
38. Crashworthiness optimization design of thin-walled tube filled with re-entrant triangles honeycombs10.1007/s42154-019-00051-7 ↗
39. Xiaojiang L, Weiguo L, Haiyan Y, et al. Test Validation for Pedestrian Protection Performance of CFRP Hood[J]. Automobile Technology, 2015.
40. Guanghui Bai, Mo Zhang, Yue Guo. Standard diagram of mechanical properties test for advanced composite materials, [M], Chemical Industry Press, 2015.
41. Fujun C, Yue L. Research on the Difference of Pedestrian Protection in Different Countries Based on NCAP[J]. Automobile Applied Technology, 2018.
42. Yoon J M, Lee Y, Park S O, et al. Crash optimization considering the head injury criterion[J]. Proceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering, 2018.10.1177/0954407018809298 ↗