journal article·2021-12

An evaluation of Cuntze and Puck inter fibre failure criteria in simulation of thin CFRP plates subjected to low velocity impact

M. Rezasefat, Alvaro Gonzalez-Jimenez, M. Giglio, A. Manes

Publisher page

Abstract

Abstract This paper presents the implementation and evaluation of a continuum damage mechanics-based material model to predict the damage and mechanical response of carbon fibre reinforced polymer composites subjected to low velocity impact. Failure mode concept model of Cuntze and Action plane strength model of Puck are employed as inter-fibre failure criteria in combination with non-linear shear behaviour and damage evolution using a user-defined material model in Abaqus/Explicit to account for the progressive damage in laminated composites. A novel approach has been used for the search of the fracture angle of Puck’s failure model to decrease the computational time of explicit simulations. Meanwhile, the simpler and less recognized failure model of Cuntze was implemented to simulate the low velocity impact on composites. The capability of the numerical model was established through a set of benchmark simulations on representative volume elements, tensile specimens, and low velocity impact cases. Both failure criteria were able to predict approximately the same shape and area for the matrix damage caused by the low velocity impact. Showing that the failure model of Cuntze is preferable to Puck since it does not require a search algorithm for the fracture angle and is more efficient for explicit simulations.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Mechanical Behavior of Composites · Structural Behavior of Reinforced Concrete · Structural Response to Dynamic Loads

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (59)

Show source-provided references
1. Hinton · 2004 · 2
2. Maturity of 3D failure criteria for fibre-reinforced composites: Comparison between theories and experiments: Part B of WWFE-II10.1177/0021998313478710 ↗
3. Failure analysis of FRP laminates by means of physically based phenomenological models10.1016/B978-008044475-8/50028-7 ↗
4. The predictive capability of failure mode concept-based strength criteria for multi-directional laminates-part B10.1016/S0266-3538(03)00225-2 ↗
5. A consistent anisotropic damage model for laminated fiber-reinforced composites using the 3D-version of the Puck failure criterion10.1016/j.ijsolstr.2017.07.023 ↗
6. Predicting low velocity impact damage and Compression-After-Impact (CAI) behaviour of composite laminates10.1016/j.compositesa.2015.01.025 ↗
7. Crack band theory for fracture of concrete10.1007/BF02486267 ↗
8. Meso-Scale Finite Element Analysis of Mechanical Behavior of 3D Braided Composites Subjected to Biaxial Tension Loadings10.1007/s10443-018-9686-0 ↗
9. Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading10.1016/j.compstruct.2018.06.021 ↗
10. Comparison of periodic mesh and free mesh on the mechanical properties prediction of 3D braided composites10.1016/j.compstruct.2016.10.012 ↗
11. A novel interface constitutive model for prediction of stiffness and strength in 3D braided composites10.1016/j.compstruct.2016.12.042 ↗
12. Meso-Scale Finite Element Simulations of 3D Braided Textile Composites: Effects of Force Loading Modes10.1007/s10443-018-9728-7 ↗
13. A review of phase-field models, fundamentals and their applications to composite laminates10.1016/j.engfracmech.2021.107705 ↗
14. An explicit phase field model for progressive tensile failure of composites10.1016/j.engfracmech.2020.107371 ↗
15. 3D micromechanical progressive failure simulation for fiber-reinforced composites10.1016/j.compstruct.2020.112534 ↗
16. Phase field modeling of fracture in fiber reinforced composite laminate10.1016/j.ijmecsci.2019.07.007 ↗
17. Modelling distinct failure mechanisms in composite materials by a combined phase field method10.1016/j.compstruct.2019.111551 ↗
18. A new multiscale phase field method to simulate failure in composites10.1016/j.advengsoft.2018.08.010 ↗
19. Experimental determination of material parameters in Cuntze’s Failure-Mode-Concept-based UD strength failure conditions10.1016/j.compscitech.2016.08.006 ↗
20. A pragmatic approach for a 3D material model considering elasto-plastic behaviour, damage initiation by Puck or Cuntze and progressive failure of fibre-reinforced plastics10.1016/j.compstruc.2020.106280 ↗
21. Assessment of failure criteria and damage evolution methods for composite laminates under low-velocity impact10.1016/j.compstruct.2018.09.093 ↗
22. A fast fracture plane orientation search algorithm for Puck’s 3D IFF criterion for UD composites10.1016/j.mtcomm.2021.102700 ↗
23. ASTM D7136 / D7136M-15. Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight. Impact Event, ASTM Int 2015.
24. Guidelines for the determination of the parameters in Puck’s action plane strength criterion10.1016/S0266-3538(01)00202-0 ↗
25. Part 3: Development of Fibre Reinforced Plastics Components
26. A non-linear shear damage model to reproduce permanent indentation caused by impacts in composite laminates10.1016/j.compstruct.2013.12.017 ↗
27. A simple flow rule for characterizing nonlinear behavior of fiber composites10.1177/002199838902301004 ↗
28. A cubic spline implementation of non-linear shear behaviour in three-dimensional progressive damage models for composite laminates10.1016/j.compstruct.2009.07.025 ↗
29. D 3518. Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a 645 ° Laminate 1. Annu B ASTM Stand 2007.
30. Numerical analysis of intralaminar failure mechanisms in composite structures
31. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
32. Numerical investigation on the repeated low-velocity impact behavior of composite laminates10.1016/j.compositesb.2020.107771 ↗
33. Composite damage model based on continuum damage mechanics and low velocity impact analysis of composite plates10.1016/j.compstruct.2012.07.002 ↗
34. Modeling damage induced plasticity for low velocity impact simulation of three dimensional fiber reinforced composite10.1016/j.compstruct.2015.04.070 ↗
35. A combined elastoplastic damage model for progressive failure analysis of composite materials and structures10.1016/j.compstruct.2012.04.021 ↗
36. Carlile D, Leach D, Moore D, Zahlan N. Mechanical Properties of the Carbon Fiber/PEEK Composite APC-2/AS-4 for Structural Applications. Adv. Thermoplast. Matrix Compos. Mater., ASTM International; 2008, p. 199-199–14. https://doi.org/10.1520/stp24603s.10.1520/STP24603S ↗
37. Orthotropic elasto-plastic behavior of AS4/PEEK thermoplastic composite in compression10.1016/0167-6636(90)90022-8 ↗
38. Micromechanical analysis of the off-axis rate-dependent inelastic behavior of unidirectional AS4/PEEK at high temperature10.1016/S0020-7403(01)00029-7 ↗
39. Characterization of Elastic-Plastic Behavior of AS4/PEEK Thermoplastic Composite for Temperature Variation10.1177/002199839102501003 ↗
40. Effects of ply clustering in laminated composite plates under low-velocity impact loading10.1016/j.compscitech.2010.12.018 ↗
41. A CDM-based failure model for predicting strength of notched composite laminates10.1016/S1359-8368(02)00030-6 ↗
42. Elastoplastic CDM model based on Puck’s theory for the prediction of mechanical behavior of Fiber Reinforced Polymer (FRP) composites10.1016/j.compstruct.2018.06.010 ↗
43. ASTM D3039. Standard test methods for Tensile Properties of Polymer Matrix Composite Materials. Annu B ASTM Stand 2014.
44. Analytical model of the dynamic behaviour of CFRP plates subjected to low-velocity impacts10.1016/j.compositesb.2018.01.005 ↗
45. Gonzalez-Jimenez A, Manes A, Beligni A, Dziendzikowski M, Sbarufatti C, Giglio M. Modelling and experimental testing of thick CFRP composites subjected to low velocity impacts. Procedia Struct. Integr., vol. 24, Elsevier B.V.; 2019, p. 101–9. https://doi.org/10.1016/j.prostr.2020.02.009.10.1016/j.prostr.2020.02.009 ↗
46. Rezasefat M, Mirzababaie Mostofi T, Babaei H, Ziya-Shamami M, Alitavoli M. Dynamic plastic response of double-layered circular metallic plates due to localized impulsive loading. Proc Inst Mech Eng Part L J Mater Des Appl 2019;233. https://doi.org/10.1177/1464420718760640.10.1177/1464420718760640 ↗
47. Repeated localized impulsive loading on monolithic and multi-layered metallic plates10.1016/j.tws.2019.106332 ↗
48. Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites10.1016/0043-1648(79)90224-2 ↗
49. Coefficient of friction of composite delamination surfaces10.1016/S0043-1648(99)00315-4 ↗
50. Effect of compressive transverse normal stress on mode II fracture toughness in polymeric composites10.1007/s10704-007-9103-4 ↗
51. Numerical study on the dynamic progressive failure due to low-velocity repeated impacts in thin CFRP laminated composite plates10.1016/j.tws.2021.108220 ↗
52. Lopes CS, Sádaba S, González C, Llorca J, Camanho PP. Physically-sound simulation of low-velocity impact on fiber reinforced laminates. Int. J. Impact Eng., vol. 92, Elsevier Ltd; 2016, p. 3–17. https://doi.org/10.1016/j.ijimpeng.2015.05.014.10.1016/j.ijimpeng.2015.05.014 ↗
53. Finite element analysis of dynamic progressive failure of carbon fiber composite laminates under low velocity impact10.1016/j.compstruct.2016.04.012 ↗
54. Predicting the low velocity impact damage of a quasi-isotropic laminate using EST10.1016/j.compstruct.2020.112530 ↗
55. Initial and progressive failure analyses for composite laminates using Puck failure criterion and damage-coupled finite element method10.1016/j.compstruct.2014.11.011 ↗
56. Finite element analysis of dynamic progressive failure of plastic composite laminates under low velocity impact10.1016/j.compstruct.2016.09.099 ↗
57. Geometrical effects in the low velocity impact response of CFRP10.1016/0263-8223(89)90043-3 ↗
58. Abrate · 2005
59. Effects of matrix cracks on delamination of composite laminates subjected to low-velocity impact10.1016/j.compstruct.2020.113354 ↗