journal article·2022-02Open access

Experimental and numerical evaluation of conduction welded thermoplastic composite joints

B.H.A.H. Tijs, M.H.J. Doldersum, A. Turon, J.E.A. Waleson, C. Bisagni

Abstract

The capability of joining two thermoplastic composite parts by welding is a key technology to reduce the weight and cost of assembled parts and enables high volume manufacturing of future aeronautical structures made of thermoplastic composite materials. However, there is not much experimental understanding of the mechanisms involving welded joint failure, and the computational tools available for the simulation of thermoset composites have not yet been completely assessed for thermoplastic materials. In this work, a numerical and experimental evaluation is performed to investigate the strength and failure behavior of conduction welded thermoplastic composite joints. A welded single lap shear joint is designed, manufactured, tested and analyzed proposing two distinct modeling approaches. A simplified modeling strategy which only accounts for damage at the weld is compared to a high-fidelity model which can take into account the physical failure mechanisms at the lamina level. The high-fidelity modeling methodology is able to predict the experimental failure mode of the investigated welded joints with high accuracy and is used to gain new insights into the key-variables that influence the strength of thermoplastic welded joints. It is also found that the joint strength is highly influenced by the failure mechanisms not only of the welded interface but also of the surrounding plies.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Fatigue and fracture mechanics · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. Method for fusion bonding thermoplastic composites
2. Doldersum · 2020
3. Thermoplastic orthogrid fuselage shell
4. Double curved thermoplastic orthogrid rear fuselage shell
5. The effects of geometry and material properties on the fracture of single lap-shear joints10.1016/S0020-7683(02)00344-X ↗
6. Finite-thickness cohesive elements for modeling thick adhesives10.1016/j.engfracmech.2016.03.020 ↗
7. Strength prediction of single- and double-lap joints by standard and extended finite element modelling10.1016/j.ijadhadh.2010.09.008 ↗
8. Accurate simulation of delamination under mixed-mode loading using a cohesive model with a mode-dependent penalty stiffness10.1016/j.compstruct.2017.10.017 ↗
9. Mechanical behaviour of thermoplastic composites spot-welded and mechanically fastened joints: A preliminary comparison10.1016/j.compositesb.2016.12.028 ↗
10. Strength and failure modes in resistance welded thermoplastic composite joints: Effect of fibre-matrix adhesion and fibre orientation10.1016/j.compositesa.2013.08.008 ↗
11. Composite layup effect on the failure mechanism of single lap bonded joints10.1016/j.compstruct.2019.02.093 ↗
12. A level set model for delamination - modeling crack growth without cohesive zone or stress singularity10.1016/j.engfracmech.2011.10.013 ↗
13. Modelling delamination with cohesive interface elements
14. A floating node method for the modelling of discontinuities in composites10.1016/j.engfracmech.2014.05.018 ↗
15. Modelling and simulation methodology for unidirectional composite laminates in a virtual test lab framework10.1016/j.compstruct.2018.02.016 ↗
16. Progressive damage and failure analysis of single lap shear and double lap shear bolted joints10.1016/j.compositesa.2018.07.018 ↗
17. Development of a numerical framework for virtual testing to support design of a next generation thermoplastic multifunctional fuselage
18. Leone · 2019
19. Crystallization kinetics of cypek™ poly ether ketone ketone
20. Ishida · 2020
21. Effect of cooling rate on the interlaminar fracture toughness of unidirectional carbon/PPS laminates10.1016/j.engfracmech.2018.02.022 ↗
22. Grouve · 2020 · 1
23. Effect of resin-rich bond line thickness and fibre migration on the toughness of unidirectional carbon/PEEK joints10.1016/j.compositesa.2018.02.035 ↗
24. ASTM D3165-07(2014), Standard Test Method for Strength Properties of Adhesives in Shear By Tension Loading of Single-Lap-Joint Laminated Assemblies, 2014, West Conshohocken, PA.
25. 2017
26. 2019
27. An engineering solution for mesh size effects in the simulation of delamination using cohesive zone models10.1016/j.engfracmech.2006.08.025 ↗
28. Measurement of mixed-mode delamination fracture toughness of unidirectional glass/epoxy composites with mixed-mode bending apparatus10.1016/0266-3538(96)00005-X ↗
29. Accurate simulation of delamination growth under mixed-mode loading using cohesive elements: Definition of interlaminar strengths and elastic stiffness10.1016/j.compstruct.2010.01.012 ↗
30. Stochastic virtual testing laboratory for unidirectional composite coupons: from conventional to dispersed-ply laminates
31. Three-dimensional failure criteria for fiber-reinforced laminates10.1016/j.compstruct.2012.07.016 ↗
32. A continuum damage model for composite laminates: Part I - constitutive model10.1016/j.mechmat.2007.03.005 ↗
33. Deformation gradient tensor decomposition for representing matrix cracks in fiber-reinforced materials10.1016/j.compositesa.2015.06.014 ↗
34. Tijs BHAH, Turon A, Bisagni C. The importance of accounting for large shear deformation on modelling matrix failure of thermoplastic and thermoset composites. In: Proceedings of the 7th ECCOMAS Thematic Conference on the Mechanical Response of Composites: COMPOSITES 2019, Girona, Spain, 18-20 Sept. 2019, p. 94–94.
35. Holzapfel · 2000
36. Progressive transverse cracking in composite laminates10.1177/002199838802201001 ↗
37. Predicting the crushing behaviour of composite material using high-fidelity finite element modelling10.1080/13588265.2014.972122 ↗
38. Analysis and testing of a thermoplastic composite stiffened panel under compression