journal article·2016-06

Dependence of physical properties of linear low-density polyethylene on the silicon dioxide filler size

MM El-Tonsy, IM Fouda, AH Oraby, RM Felfel, MI El-Henawey

Publisher page

Abstract

In the current work, the influence of filler particle size on the performance of the composites was studied. Some physical parameters were measured for linear low-density polyethylene (LLDPE) films reinforced with silicon dioxide (SiO 2 ) powder. Samples filled with SiO 2 of different particle sizes and concentrations were prepared. It was found that fillers with small size caused an increase in mechanical properties of LLDPE at lower concentration than that of particles with bigger size. This was confirmed experimentally by measuring different physical parameters such as yield strength, coefficient of thermal expansion, thermal conductivity, melting temperature, and structural morphology. Therefore, filler sizes ranged from nano to micro could help in reducing the amount of the usage of filler, which could overcome the recycling problems of the filled polymers without affecting the end-use properties of the composite. Illustrations are given using figures, images, and tables.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Polymer Nanocomposites and Properties · Polymer Nanocomposite Synthesis and Irradiation · Dielectric materials and actuators

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Department of Physics, Faculty of Science, Mansoura University, Mansoura, Egypt

References (29)

Show source-provided references
1. 10.1007/BF0058011010.1007/BF00580110 ↗
2. 10.1177/089270571039745010.1177/0892705710397450 ↗
3. Kulkarni MB · J Thermoplast Compos Mater
4. 10.1177/089270570934096210.1177/0892705709340962 ↗
5. 10.1002/app.1965.07009042710.1002/app.1965.070090427 ↗
6. 10.1016/0032-3861(89)90326-110.1016/0032-3861(89)90326-1 ↗
7. 10.1007/s10853-005-2558-710.1007/s10853-005-2558-7 ↗
8. 10.1016/j.compscitech.2006.09.01510.1016/j.compscitech.2006.09.015 ↗
9. 10.1016/j.jmps.2007.02.00510.1016/j.jmps.2007.02.005 ↗
10. 10.1016/j.compositesb.2008.01.00210.1016/j.compositesb.2008.01.002 ↗
11. 10.1016/j.compscitech.2005.12.02810.1016/j.compscitech.2005.12.028 ↗
12. 10.1016/S0142-9418(02)00049-110.1016/S0142-9418(02)00049-1 ↗
13. 10.1016/S0142-9418(03)00102-810.1016/S0142-9418(03)00102-8 ↗
14. Forsythe WE. Smithsonian physical tables. Norwich, New York: Smithsonian Institution, 1954, pp. 119–124.
15. 10.1007/BF0173060510.1007/BF01730605 ↗
16. Rothon R. Particulate-filled polymer composites. Shrewsbury, UK: Rapra Technology, 2003, pp. 100, 375.
17. 10.1016/j.polymer.2005.12.03910.1016/j.polymer.2005.12.039 ↗
18. 10.1002/anie.20050307510.1002/anie.200503075 ↗
19. 10.1016/j.compositesa.2004.10.00210.1016/j.compositesa.2004.10.002 ↗
20. 10.1002/1097-0126(200102)50:2<222::AID-PI609>3.0.CO;2-H10.1002/1097-0126(200102)50:2<222::AID-PI609>3.0.CO;2-H ↗
21. 10.1016/j.jiec.2008.06.01110.1016/j.jiec.2008.06.011 ↗
22. 10.1007/3-540-52791-510.1007/3-540-52791-5 ↗
23. 10.3144/expresspolymlett.2011.5710.3144/expresspolymlett.2011.57 ↗
24. Mark JE. Polymer data handbook. New York, NY: Oxford University Press, 1999, incorporated, p. 510.
25. Hidnert P, Souder WH. Thermal expansion of solids. USA: U.S. Govt. Print. Off, 1950, p. 208.
26. 10.1007/b13716210.1007/b137162 ↗
27. 10.1007/978-94-015-9213-010.1007/978-94-015-9213-0 ↗
28. Wypych G. Handbook of plasticizers. Toronto, Canada: ChemTec Pub, 2004, p. 107.
29. 10.1016/j.compositesa.2005.02.00510.1016/j.compositesa.2005.02.005 ↗