In situ investigation of failure in 3D braided SiCf/SiC composites under flexural loading
Source abstract
Abstract
Abstract The mechanical failure of three-dimensional (3D) 4-step braided SiCf /SiC composites, processed by precursor infiltration pyrolysis , has been studied under flexural loading to investigate the condition at failure. The investigation integrated the advantages of continuous data acquisition by optical imaging and 3D reconstruction of internal structure in X-CT imaging, for in situ investigation of microstructure-related failure mechanisms. Optical imaging with digital image correlation acquired the surface displacements. X-ray computed tomographs, obtained in situ, were analysed by digital volume correlation to measure the 3D displacement fields. Image subtraction, informed by the 3D displacements, was used to detect and visualize crack development. Curvature measurement, via the displacement fields, monitored the change in effective flexural modulus . The observed failure modes included matrix cracking , inter- and intra-bundle debonding and fibre breakage . Tensile cracks were arrested by the heterogeneous microstructure, and the ultimate failure under flexural loading was due to multiple cracking in compression.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced Surface Polishing Techniques · Advanced machining processes and optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (61)
Show source-provided references
1. Ceramic matrix composites to make breakthroughs in aircraft engine performance
2. Fiber-reinforced ceramic matrix composites for aero engines
3. Real-time quantitative imaging of failure events in materials under load at temperatures above 1,600 °C10.1038/nmat3497 ↗
4. Design, preparation and properties of non-oxide CMCs for application in engines and nuclear reactors: an overview10.1016/S0266-3538(03)00230-6 ↗
5. Current status and recent research achievements in SiC/SiC composites10.1016/j.jnucmat.2014.06.003 ↗
6. Meso-scale progressive damage modeling and life prediction of 3D braided composites under fatigue tension loading10.1016/j.compstruct.2018.06.021 ↗
7. Algorithm design of four-step three-dimensional braided composite structures in Matlab environment
8. Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach10.1016/j.advengsoft.2014.12.007 ↗
9. Bansal · 2014
10. Ceramic-matrix composites enable revolutionary gains in turbine engine efficiency
11. Chemical vapor infiltrated SiC/SiC composites (CVI SIC/SIC)
12. Silicon melt infiltrated ceramic composites (HiPerCompTM)
13. Preparation of high performance SiCf/SiC composites through PIP process10.4028/www.scientific.net/KEM.544.43 ↗
14. Influence of pyrolytic carbon interface thickness on microstructure and mechanical properties of SiC/SiC composites by NITE process10.1016/j.compscitech.2007.05.037 ↗
15. SiC/SiC composites for 1200 C and above
16. Creep and stress-strain behavior after creep for SiC fiber reinforced, melt-infiltrated SiC matrix composites10.1111/j.1551-2916.2006.00939.x ↗
17. Porosity characterization of fiber-reinforced ceramic matrix composite using synchrotron X-ray computed tomography10.1088/1748-0221/11/03/C03052 ↗
18. Effect of heat treatment on microstructure and mechanical properties of PIP-SiC/SiC composites10.1016/j.msea.2012.09.027 ↗
19. Mechanical properties of 3D KD-I SiCf/SiC composites with engineered fibre-matrix interfaces10.1016/j.compscitech.2011.01.014 ↗
20. Fiber strength measurement for KD-I(f)/SiC composites and correlation to tensile mechanical behavior at room and elevated temperatures10.1016/j.ceramint.2014.08.072 ↗
21. Tensile creep behavior of three-dimensional four-step braided SiC/SiC composite at elevated temperature10.1016/j.ceramint.2017.02.076 ↗
22. Effect of fiber directionality on the static and dynamic mechanical properties of 3D SiCf/SiC composites10.1016/j.msea.2016.02.006 ↗
23. Effect of film cooling holes on the mechanical properties of 3D braided SiCf/SiC composites at 1350 °C in air10.1016/j.ceramint.2019.12.020 ↗
24. Optimization of digital image correlation for high-resolution strain mapping of ceramic composites10.1007/s11340-012-9617-1 ↗
25. Experimental study of tensile properties and deformation evolutions of 2D and 2.5D woven SiO2f/SiO2 composites using single-camera stereo-digital image correlation10.1016/j.compstruct.2018.05.135 ↗
26. In-situ bending behavior and failure characterization of 3D needle-punched C/SiC composites10.1016/j.mtcomm.2017.11.002 ↗
27. Investigation on non-uniform strains of a 2.5D woven ceramic matrix composite under in-plane tensile stress10.1016/j.jeurceramsoc.2019.08.030 ↗
28. Experimental results on the elevated temperature tensile response of SiC/SiC ceramic matrix notched composites10.1016/j.compositesb.2018.01.019 ↗
29. An experimentally validated computational model for progressive damage analysis of notched oxide/oxide woven ceramic matrix composites10.1016/j.compstruct.2016.11.001 ↗
30. Characterization of SiC/SiC composites damage mechanisms using digital image correlation at the tow scale10.1016/j.compositesa.2014.09.021 ↗
31. Synchrotron X-ray tomographic characterization of CVI engineered 2D-woven and 3D-braided SiCf/SiC composites10.1016/j.ceramint.2016.08.001 ↗
32. Nondestructive Evaluation of Microstructure of SiC f/SiC Composites by X-Ray Computed Microtomography[J]10.4191/kcers.2013.50.6.378 ↗
33. Porosity analysis of long-fiber-reinforced ceramic matrix composites using X-ray tomography10.1016/j.scriptamat.2008.11.018 ↗
34. Analysis of the damage initiation in a SiC/SiC composite tube from a direct comparison between large-scale numerical simulation and synchrotron X-ray micro-computed tomography10.1016/j.ijsolstr.2018.11.009 ↗
35. Crack initiation and propagation in braided SiC/SiC composite tubes: effect of braiding angle10.1016/j.jeurceramsoc.2020.04.060 ↗
36. In situ observation of compression damage in a 3D needled-punched carbon fiber-silicon carbide ceramic matrix composite10.1016/j.compstruct.2018.11.041 ↗
37. Acoustic emission and X-ray computed microtomography characterization of damage accumulation in a woven Cf/SiC composite10.1016/j.matchar.2019.05.033 ↗
38. Combining in-situ synchrotron X-ray microtomography and acoustic emission to characterize damage evolution in ceramic matrix composites10.1016/j.jeurceramsoc.2019.05.027 ↗
39. Volumetric assessment of fatigue damage in a SiCf/SiC ceramic matrix composite via in situ X-ray computed tomography10.1016/j.jeurceramsoc.2020.04.037 ↗
40. 3D studies of damage by combined X-ray tomography and digital volume correlation10.1016/j.mspro.2014.06.251 ↗
41. Damage investigation and modeling of 3D woven ceramic matrix composites from X-ray tomography in-situ tensile tests10.1016/j.actamat.2017.08.034 ↗
42. DVC-based image subtraction to detect microcracking in lightweight concrete10.1111/str.12276 ↗
43. In-situ damage monitoring of a SiC/SiC ceramic matrix composite using acoustic emission and digital image correlation10.1016/j.compstruct.2016.09.040 ↗
44. Quantifying the three-dimensional damage and stress redistribution mechanisms of braided SiC/SiC composites by in situ volumetric digital image correlation10.1016/j.scriptamat.2016.12.021 ↗
45. Progressive damage analysis of three-dimensional braided composites under flexural load by micro-CT and acoustic emission10.1016/j.compstruct.2019.111196 ↗
46. Damage development during flexural loading of a 5-directional braided C/C-SiC composite, characterized by X-ray tomography and digital volume correlation10.1016/j.ceramint.2018.12.020 ↗
47. A review of third generation SiC fibers and SiCf/SiC composites10.1016/j.jmst.2019.07.020 ↗
48. Mechanical properties of the SiC f /SiC composites reinforced with KD-I and KD-II fibers fabricated assisted by a microwave heating method10.1016/j.ceramint.2019.03.223 ↗
49. ASTM C1341-13 – standard test method for flexural properties of continuous fiber-reinforced advanced ceramic composites
50. BS EN 15156 · 2006 · 3
51. Jing · 2016
52. Measurement of multiple mechanical properties for polymer composites using digital image correlation at elevated temperatures10.1016/j.matdes.2020.109349 ↗
53. In situ observation of the deformation and fracture of an alumina-alumina ceramic-matrix composite at elevated temperature using X-ray computed tomography10.1016/j.jeurceramsoc.2021.01.030 ↗
54. Effect of microwave sintering time on the flexural properties of the SiC/SiC composites10.1016/j.ceramint.2015.07.192 ↗
55. Reconstruction of meso-structure and numerical simulations of the mechanical behavior of three-dimensional four-directional braided ceramic matrix composites10.1016/j.ceramint.2020.08.107 ↗
56. The effects of preparation temperature on the SiCf/SiC 3D4d woven composite10.1016/j.ceramint.2020.02.080 ↗
57. Bending fatigue behavior in an advanced SiC/SiC ceramic matrix composite component at elevated temperature in air10.1016/j.jcomc.2021.100127 ↗
58. Influence of fibre architecture on the tensile, compressive and flexural behaviour of 3D woven composites10.1016/j.compositesa.2014.11.012 ↗
59. Mechanical properties and in situ crack growth observation of SiC/SiC composites10.1016/j.ceramint.2013.12.098 ↗
60. Effect of interface type on the static and dynamic mechanical properties of 3D braided SiCf/SiC composites10.1016/j.msea.2016.05.080 ↗
61. Fatigue behaviour related to interface modification during load cycling in ceramic-matrix fibre composites10.1016/0266-3538(93)90126-2 ↗