journal article·2023-07

4D printing of continuous fiber-reinforced electroactive smart composites by coaxial additive manufacturing

Ali Fallah, Suleman Asif, Gizem Gokcer, Bahattin Koc

Publisher page

Abstract

In this study, a coaxial additive manufacturing process was developed for four-dimensional (4D) printing with continuous carbon fiber-reinforced shape memory polymers (SMPs). These materials have potential applications in the aerospace, automotive, and biomedical industries due to their high strength-to-weight ratio and shape memory properties. The mechanical and thermal properties of the SMPs were evaluated and the effects of printing parameters on printability and carbon fiber volume fraction were analyzed to determine optimal printing conditions. It was found that even a small amount of carbon fiber significantly improved the mechanical properties of the 4D printed samples. The shape memory properties of the printed samples were also examined, and it was found that the structure was able to recover the original shape quickly at low-temperature programming, making it suitable for load-bearing structures. At high-temperature programming, the structure retained the programmed shape well, but recovery of the original shape was slower and incomplete. The use of continuous carbon fiber reinforced SMPs also allows for Joule heating to be used for shape recovery, with the applied voltage able to control the shape recovery process. A high level of deformation recovery (95%) was also achieved in highly deformed structures.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Polymer composites and self-healing · Advanced Materials and Mechanics · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. Mechanical models, structures, and applications of shape-memory polymers and their composites10.1007/s10338-019-00103-9 ↗
2. Jani JM et al. A review of shape memory alloy research, applications and opportunities. Mater Des 2014;(1980-2015) 56: p. 1078-1113.10.1016/j.matdes.2013.11.084 ↗
3. Cold, warm, and hot programming of shape memory polymers10.1002/polb.24041 ↗
4. Shape memory behavior and recovery force of 4D printed textile functional composites10.1016/j.compscitech.2018.03.037 ↗
5. Microstructural design for enhanced shape memory behavior of 4D printed composites based on carbon nanotube/polylactic acid filament10.1016/j.compscitech.2019.107692 ↗
6. Experimental characterization and micrography of 3D printed PLA and PLA reinforced with short carbon fibers10.1016/j.compositesb.2017.05.013 ↗
7. Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation10.1038/srep23058 ↗
8. 4D printed electro-induced continuous carbon fiber reinforced shape memory polymer composites with excellent bending resistance10.1016/j.compositesb.2020.108034 ↗
9. Mechanical characterization of FDM 3D printing of continuous carbon fiber reinforced PLA composites10.1016/j.compositesb.2019.107147 ↗
10. Fused deposition technique for continuous fiber reinforced thermoplastic10.1007/s11665-016-2459-8 ↗
11. Determining process-window for manufacturing of continuous carbon fiber-reinforced composite Using 3D-printing10.1080/10426914.2020.1843664 ↗
12. An experimental and numerical investigation on mechanical properties of 3D printed continuous glass tow preg-reinforced composites10.1108/RPJ-08-2021-0200 ↗
13. A parametric study and characterization of additively manufactured continuous carbon fiber reinforced composites for high-speed 3D printing10.1007/s00170-021-06723-1 ↗
14. 3D printing of polylactic acid bioplastic-carbon fibres and twisted kevlar composites through coextrusion using fused deposition modeling10.32604/jrm.2020.011870 ↗
15. Quasi-static penetration property of 3D printed woven-like ramie fiber reinforced biocomposites10.1016/j.compstruct.2022.116313 ↗
16. Self-sensing properties of 3D printed continuous carbon fiber-reinforced PLA/TPU honeycomb structures during cyclic compression10.1016/j.matlet.2022.132077 ↗
17. Compression behavior and energy absorption of 3D printed continuous fiber reinforced composite honeycomb structures with shape memory effects
18. Bending performance and failure behavior of 3D printed continuous fiber reinforced composite corrugated sandwich structures with shape memory capability10.1016/j.compstruct.2021.113626 ↗
19. Temperature-dependent mechanical response of 4D printed composite lattice structures reinforced by continuous fiber10.1016/j.compstruct.2021.114952 ↗
20. Compressive property and shape memory effect of 3D printed continuous ramie fiber reinforced biocomposite corrugated structures10.1088/1361-665X/ac95e4 ↗
21. Synthesis of PLA-based thermoplastic elastomer and study on preparation and properties of PLA-based shape memory polymers10.1088/2053-1591/ab61a8 ↗
22. Development and processing of continuous flax and carbon fiber-reinforced thermoplastic composites by a modified material extrusion process10.3390/ma14092332 ↗
23. Rapid prototyping of continuous carbon fiber reinforced polylactic acid composites by 3D printing10.1016/j.jmatprotec.2016.07.025 ↗
24. Surprising shape-memory effect of polylactide resulted from toughening by polyamide elastomer10.1016/j.polymer.2009.01.032 ↗
25. Shape memory properties of melt-blended polylactic acid (PLA)/thermoplastic polyurethane (TPU) bio-based blends10.1007/s10965-013-0140-6 ↗