journal article·2017-12

Multiscale modeling of carbon nanotube reinforced concrete

Vissarion Papadopoulos, Marios Impraimakis

Publisher page

Abstract

Abstract The present paper proposes a hierarchical multiscale approach in order to evaluate the nonlinear constitutive behavior of concrete reinforced with carbon nanotubes (CNTs). To this purpose, representative volume elements, consistent to the microstructural topology of the material, are constructed and analyzed using finite elements. As the dimensions of the CNTs and those of a typical mesoscale concrete RVE differ by orders of magnitude, a hierarchical multiscale analysis strategy is implemented to pass information through scales with different RVEs assigned at each scale of separation. Both elastic and inelastic analyses are performed on all scales for various CNT weight fractions, defining a different nonlinear constitutive stress–strain behavior at each scale of separation. It is shown that the proposed computational approach can be used alternatively to corresponding costly experiments in order to accurately evaluate the nonlinear constitutive behavior of such complex materials.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Composite Material Mechanics · Nonlocal and gradient elasticity in micro/nano structures · Rock Mechanics and Modeling

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (73)

Show source-provided references
1. Aggregate effect on elastic moduli of cement – based composite materials
2. Modelling elasticity of a hydrating cement paste10.1016/j.cemconres.2007.07.003 ↗
3. The use of coarse and fine crushed bricks as aggregate in concrete10.1016/j.conbuildmat.2006.12.013 ↗
4. Dynamic behavior of concrete at high strain rates and pressures: I. Experimental characterization10.1016/S0734-743X(01)00020-3 ↗
5. Experimental investigations on elastic properties of concrete containing steel fiber
6. Gere · 1994
7. Effect of type and volume fraction of aggregate on the fracture properties of concrete
8. The surface area of cement paste as measured by neutron scattering – evidence for two C-S-H morphologies10.1016/S0008-8846(98)00049-0 ↗
9. Strain-rate sensitive behavior of cement paste and mortar in compression
10. Shrinkage influence on tension stiffening in concrete members10.1016/j.engstruct.2008.10.007 ↗
11. Carpinteri · 1999
12. Lemaitre · 2001 · vol. 2
13. One damage law for different mechanisms10.1007/s004660050221 ↗
14. Smeared crack models of rc beams with externally bonded cfrp plates10.1007/s004660000180 ↗
15. Rots · 1988
16. Influence of carbon nanotubes structure on the mechanical behavior of cement composites10.1016/j.compscitech.2009.05.002 ↗
17. DIN 1045-1. Tragwerke aus Beton, Stahlbeton und Spannbeton – Bemessung und Konstruktion; 2001.
18. DIN EN 206-1. Beton – Festlegung, Eigenschaften, Herstellung und Konformität; 2000.
19. DIN 1045-2. Tragwerke aus Beton, Stahlbeton und Spannbeton – Deutsche Anwendungsregeln zu DIN EN 206-1 Beton; 2001.
20. DIN 1045-3. Tragwerke aus Beton, Stahlbeton und Spannbeton – Bauausführung; 2001.
21. DIN 1045-4. Tragwerke aus Beton, Stahlbeton und Spannbeton – Ergänzende Regeln für die Herstellung und Überwachung von Fertigteilen; 2001.
22. Assessment of fracture properties of epoxy polymer concrete reinforced with short carbon and glass fibers10.1016/j.conbuildmat.2004.04.010 ↗
23. Designing and testing of concrete bridge decks reinforced with glass FRP bars10.1061/(ASCE)1084-0702(2006)11:2(217) ↗
24. Influence of steel fibres on strength and ductility of normal and lightweight high strength concrete10.1016/S0360-1323(01)00109-3 ↗
25. A Comparative Study of Concretes Reinforced with Carbon, Polyethylene, and Steel Fibers and Their Improvement by Latex Addition
26. Makar J, Margeson J, Luh J. Carbon nanotube/cement composites – early results and potential applications. In: 3rd International Conference on Construction Materials: Performance, Innovations and Structural Implications, Vancouver, B.C., Aug. 22–24; 2005. p. 1–10.
27. Dispersion of carbon nanotubes and its influence on the mechanical properties of the cement matrix10.1016/j.cemconcomp.2012.07.008 ↗
28. Numerical simulation of CNT incorporated cement
29. Micromechanical analysis of cement paste with carbon nanotubes10.14311/1670 ↗
30. Mesoscale models for concrete Homogenization and damage behavior10.1016/j.finel.2005.11.008 ↗
31. Experimental and numerical study of effective properties of composite materials
32. Multi-scale modeling of concrete performance10.3151/jact.1.91 ↗
33. Is concrete a poromechanics material? – A multiscale investigation of poroelastic properties
34. A multilevel finite element method (FE2) to describe the response of highly non-linear structures using generalized continua
35. Kouznetsova · 2002
36. Helical microtubules of graphitics carbon10.1038/354056a0 ↗
37. Mechanical properties of carbon nanotubes10.1007/s003390050999 ↗
38. Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes10.1016/S0921-5093(01)01807-X ↗
39. Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load10.1126/science.287.5453.637 ↗
40. Exceptionally high Young's modulus observed for individual carbon nanotubes10.1038/381678a0 ↗
41. Finite crystal elasticity of carbon nanotubes based on the exponential Cauchy-Born rule10.1103/PhysRevB.69.115415 ↗
42. Size-dependent elastic properties of a single-walled carbon nanotube via a molecular mechanics model10.1016/S0022-5096(03)00006-1 ↗
43. Simulation of elastic properties of single-walled carbon nanotubes10.1016/S0266-3538(03)00074-5 ↗
44. On the elastic properties of carbon nanotube-based composites: modelling and characterization10.1088/0022-3727/36/5/323 ↗
45. Savvas · 2012
46. Savvas · 2014
47. Nonlinear multiscale homogenization of carbon nanotube reinforced composites with interfacial slippage10.1615/IntJMultCompEng.2014007258 ↗
48. The effect of interfacial shear strength on damping behavior of carbon nanotube reinforced composites10.1016/j.ijsolstr.2012.08.031 ↗
49. Machida · 1999
50. A full periodic-table force-field for molecular mechanics and molecular dynamics simulations10.1021/ja00051a040 ↗
51. Empirical potential for hydrocarbons for use in simulating the chemical vapor deposition of diamond films10.1103/PhysRevB.42.9458 ↗
52. The phenomena of rupture and flow in solids10.1098/rsta.1921.0006 ↗
53. Multiscale failure analysis of fiber reinforced concrete based on a discrete crack model10.1007/s10704-012-9733-z ↗
54. Multiscale failure modeling of concrete: micromechanical modeling, discontinuous homogenization and parallel computations10.1016/j.cma.2011.09.014 ↗
55. Fabio Biondini. A three-dimensional finite beam element for multiscale damage measure and seismic analysis of concrete structures. In: 13th World Conference on Earthquake Engineering Vancouver, B.C., Canada August 1–6; 2004. Paper No. 2963.
56. An XFEM multiscale approach for fracture analysis of carbon nanotube reinforced concrete10.1016/j.tafmec.2014.06.005 ↗
57. Behavior of multi-walled carbon nanotubes on the porosity and microstructure of cement-based materials10.1016/j.apsusc.2010.09.030 ↗
58. Multi-scale mechanical and fracture characteristics and early-age strain capacity of high performance carbon nanotube/cement nanocomposites10.1016/j.cemconcomp.2009.10.007 ↗
59. Multiscale carbon nanotube-carbon fiber reinforcement for advanced epoxy composites10.1021/la062743p ↗
60. Radial mechanical properties of single-walled carbon nanotubes using modified molecular structure mechanics10.1016/j.commatsci.2009.11.034 ↗
61. The impact of interfacial properties on the macroscopic performance of carbon nanotube composites. A FE2-based multiscale study10.1016/j.compstruct.2015.10.025 ↗
62. Elastic properties of reinforced solids: some theoretical principles10.1016/0022-5096(63)90036-X ↗
63. Maugin · 1992 · vol. 7
64. Analysis of composite materials10.1115/1.3167081 ↗
65. A new way of prediction elastic modulus of normal and high strength concrete—fuzzy logic10.1016/j.cemconres.2005.01.001 ↗
66. Effect of testing techniques on the post-ultimate behaviour of concrete in compression10.1007/BF02474861 ↗
67. Constitutive modeling of steel-polypropylene hybrid fiber reinforced concrete using a non-associated plasticity and its numerical implementation10.1016/j.compstruct.2014.01.025 ↗
68. Finite element modeling of steel-polypropylene hybrid fiber reinforced concrete using modified concrete damaged plasticity10.1016/j.engstruct.2017.06.039 ↗
69. A multiscale quasicontinuum method for lattice models with bond failure and fiber sliding10.1016/j.cma.2013.10.027 ↗
70. Stochastic damage hysteretic model for concrete based on micromechanical approach10.1016/j.ijnonlinmec.2016.03.012 ↗
71. Stochastic multiscale modeling of graphene reinforced composites10.1016/j.engstruct.2017.05.015 ↗
72. Effect of waviness and orientation of carbon nanotubes on random apparent material properties and RVE size of CNT reinforced composites10.1016/j.compstruct.2016.06.009 ↗
73. Stochastic finite element analysis of composite structures based on mesoscale random fields of material properties10.1016/j.cma.2017.08.002 ↗