journal article·2026-07

Effect of tool geometry variations on weld bead structure and mechanical properties of friction stir welding of dissimilar material Acrylonitrile Butadiene Styrene and polystyrene sheets thermoplastics

Balmiki Kumar, Amar Nath Sinha, Prakash Chandra

Publisher page

Abstract

Acrylonitrile Butadiene Styrene (ABS) and Polystyrene Sheets (PS) are versatile thermoplastics that are likely to be used in engineering thermoplastics commonly employed in automotive interior components, consumer electronics housings, household and medical products, and lightweight packaging structures. ABS is durable and resistant to impact, while PS is stiff. The present study investigates the effect of different tool pin geometries and process parameters on the weld bead structure and mechanical properties of friction stir-welded (FSWed) dissimilar thermoplastics, ABS, and PS. Both tool pin profiles, namely Threaded cylindrical (TC) and threaded triangular (TT), were made with the same shoulder diameters (21 mm) and pin lengths (3.7 mm) and joint under varying process parameters, including traverse speeds (9, 18, 27 mm/min) and rotating speeds (800, 900, 1100 rpm) is used to join ABS & PS. With a maximum UTS of 24.5 MPa, Shore D hardness of 83.6, and elongation of 5% at 900 rpm and 18 mm/min, the TC tool continuously outperformed the TT tool. Because TT tools required less heat and churning, the weld appeared smoother but had lower mechanical strength (higher strength was found at 18.98 MPa at 900 rpm and 27 mm/min). The findings demonstrate that TC geometry offers better material flow and bonding, making it more suitable for thermoplastic joints with high strength.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Brake Systems and Friction Analysis · Tribology and Wear Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

National Institute of Technology

References (29)

Show source-provided references
1. 10.1007/s00170-014-6427-x10.1007/s00170-014-6427-x ↗
2. 10.1080/01694243.2017.129057310.1080/01694243.2017.1290573 ↗
3. 10.1016/j.matdes.2012.08.07110.1016/j.matdes.2012.08.071 ↗
4. 10.1177/030932471143468110.1177/0309324711434681 ↗
5. 10.1016/j.mser.2005.07.00110.1016/j.mser.2005.07.001 ↗
6. Kumar S. An introduction of green energy-based welding process. In: Green Manufacturing and Materials Processing Methods. CRC Press pp. 64–89.10.1201/9781003449225-5 ↗
7. 10.1016/j.optlastec.2024.11175110.1016/j.optlastec.2024.111751 ↗
8. 10.1080/10589759.2024.231008910.1080/10589759.2024.2310089 ↗
9. Goswami NK, Nayak LP, Pal K. Joining of dissimilar thermoplastic polymers using friction stir processing: a review. NanoWorld J 2023; 9(S1): S72–S77.
10. 10.1179/1362171811Y.000000004410.1179/1362171811Y.0000000044 ↗
11. Arif M, Kumar D, Siddiquee AN. Mechanical properties and defects in friction stir welded acrylonitrile butadiene styrene polymer. Proc Inst Mech Eng Part L 2023; 237(9): 1897–1909.
12. 10.1177/0731684423120344410.1177/07316844231203444 ↗
13. 10.1088/1402-4896/ad98d010.1088/1402-4896/ad98d0 ↗
14. 10.5937/fme2402279g10.5937/fme2402279g ↗
15. 10.1007/s00170-023-12831-x10.1007/s00170-023-12831-x ↗
16. 10.1088/2051-672X/acd5ea10.1088/2051-672X/acd5ea ↗
17. 10.18311/jmmf/2022/3067710.18311/jmmf/2022/30677 ↗
18. 10.1177/0892705724128333910.1177/08927057241283339 ↗
19. 10.3390/pr1303072310.3390/pr13030723 ↗
20. 10.1007/s10904-024-03553-y10.1007/s10904-024-03553-y ↗
21. 10.1371/journal.pone.032245610.1371/journal.pone.0322456 ↗
22. 10.4236/oalib.111009710.4236/oalib.1110097 ↗
23. Sahu PK, Pal S, Mondal D. Optimization of friction stir welding parameters for polymeric materials using Taguchi method. J Mater Res Technol 2021; 13: 1926–1935.
24. Mubarak NM, Abdullah EC, Khalid M. Friction stir welding of polymers: a review on heat generation and material flow. Mater Today Proc 2022; 62: 2519–2525.
25. Singh R, Sachdeva A, Singh T. Effect of tool pin profile on mechanical properties of polymeric friction stir welds. Mater Today Proc 2020; 28: 2050–2055.
26. 10.1007/s00170-021-07650-x10.1007/s00170-021-07650-x ↗
27. 10.1016/j.compstruct.2020.11277210.1016/j.compstruct.2020.112772 ↗
28. 10.1016/j.engfailanal.2018.12.00310.1016/j.engfailanal.2018.12.003 ↗
29. 10.1007/s11665-021-06017-310.1007/s11665-021-06017-3 ↗