journal article·2013-09

Process and performance evaluation of ultrasonic, induction and resistance welding of advanced thermoplastic composites

Irene Fernandez Villegas, Lars Moser, Ali Yousefpour, Peter Mitschang, Harald EN Bersee

Publisher page

Abstract

The possibility of assembling through welding is one of the major features of thermoplastic composites and it positively contributes to their cost-effectiveness in manufacturing. This article presents a comparative evaluation of ultrasonic, induction and resistance welding of individual carbon fibre-reinforced polyphenylene sulphide (PPS) thermoplastic composite samples that comprises an analysis of the static and dynamic mechanical behaviour of the joints as well as of the main process variables. The induction welding process as used in this research benefitted from the conductive nature of the reinforcing fibres. Hence, no susceptor was placed at the welding interface. Resistance welding used a fine-woven stainless-steel mesh as the heating element and low welding pressures and times were applied to prevent current leakage. Triangular energy directors moulded on a separate tape of PPS resin were used to concentrate ultrasonic heat at the welding interface. The static single-lap shear strength of the joints was found similar for induction and ultrasonic welding. A 15% drop in the static mechanical properties of the resistance welded joints was attributed to incomplete welded overlaps following current leakage prevention. However, the fatigue performance relative to the static one was similar for the three sorts of joints. A comparative analysis of process variables such as welding time, required power and energy was also carried out.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Mechanical Behavior of Composites · Advanced Welding Techniques Analysis · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

Affiliations

Delft University of Technology, Delft, The Netherlands

Institut fuer Verbundwerkstoffe GmbH, Kaiserslautern, Germany

National Research Council Canada, Montreal, Quebec, Canada

References (33)

Show source-provided references
1. 10.1177/089270570404518710.1177/0892705704045187 ↗
2. 10.1016/S1359-835X(00)00166-410.1016/S1359-835X(00)00166-4 ↗
3. Benatar A · SAMPE Q · 1986 · 18 · 35
4. 10.1016/0261-3069(84)90032-310.1016/0261-3069(84)90032-3 ↗
5. 10.1163/15685510275361330910.1163/156855102753613309 ↗
6. 10.1016/j.compscitech.2005.11.00910.1016/j.compscitech.2005.11.009 ↗
7. Todd SM. · 1990 · 383
8. Offringa A. · 2006
9. Van Ingen JW · 2010
10. 10.1002/(SICI)1098-2329(199711)16:4<279::AID-ADV3>3.0.CO;2-S10.1002/(SICI)1098-2329(199711)16:4<279::AID-ADV3>3.0.CO;2-S ↗
11. Lu HM · 1991
12. Moser L · SAMPE J · 2008 · 44 · 43
13. 10.1016/S1359-835X(04)00182-410.1016/S1359-835X(04)00182-4 ↗
14. 10.1002/pen.76029231310.1002/pen.760292313 ↗
15. Taylor NS. · Weld Inst Res Bull · 1987 · 221
16. Maguire DM · SAMPE J · 1989 · 25 · 11
17. Silverman EM · SAMPE J · 1989 · 25 · 34
18. 10.1007/978-94-009-0787-4_1210.1007/978-94-009-0787-4_12 ↗
19. 10.1016/0010-4361(91)90199-Q10.1016/0010-4361(91)90199-Q ↗
20. 10.1177/08927057930060020510.1177/089270579300600205 ↗
21. Beevers A · Engineering · 1991 · 231 · 11
22. Ahmed TJ · 2005 · 111
23. Yousefpour A · 2007 · 559
24. 10.1016/j.compscitech.2008.02.01210.1016/j.compscitech.2008.02.012 ↗
25. Withworth HA · J Adv Mater · 1998 · 30 · 25
26. Villegas IF · 2010
27. Eveno EC · 1989
28. 10.1002/adv.2017810.1002/adv.20178 ↗
29. Yousefpour A · 2005 · 1289
30. 10.1520/JTE10666J10.1520/JTE10666J ↗
31. 10.1163/15685610131703550310.1163/156856101317035503 ↗
32. 10.1016/S0266-3538(00)00025-710.1016/S0266-3538(00)00025-7 ↗
33. 10.1016/j.compscitech.2007.09.00810.1016/j.compscitech.2007.09.008 ↗