Understanding a frequency shifting phenomenon interfering with in-line acoustic monitoring of an extrusion compounding process for polymer composites
Source abstract
Abstract
This study investigated an anomalous frequency shift observed in collected spectra from an inline monitoring system based on guided ultrasonic waves, with the changing flow rate of an extrusion compounding process for fiber-reinforced thermoplastics. Three possible process parameters to explain the ultrasonic peak shifting, namely melt temperature, velocity, and fiber length were evaluated. The unlikely potential of a doppler moment due to melt velocity, was readily dismissed in the analysis since fluid flow through the die was too slow and while resonance frequency variation may be possible from the related fiber damage associated with increasing flow rates, there was insufficient physical evidence of this anticipated effect in this study. Melt temperature variation associated with viscous dissipation was concluded to be the dominant cause for the frequency shifting noted in the acoustic spectra. The changes in material temperature through which the sound travelled were varying the extent and frequency of the dispersion modes in the polymer melt. These findings are new guidance to processors on setting up a system using active ultrasonics for in-line monitoring in the polymer composites industry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Mechanical Behavior of Composites · Ultrasonics and Acoustic Wave Propagation · Material Properties and Processing
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
McMaster University
University of Western Ontario
Karlsruhe Institute of Technology (KIT)
Funding
Deutsche Forschungsgemeinschaft · NSERC Collaborative Research and Training Experience (CREATE) Program: Advanced Polymer Composite Materials and Technologies
References (36)
Show source-provided references
1. 10.3139/9781569906934.00110.3139/9781569906934.001 ↗
2. 10.1007/978-3-662-10680-810.1007/978-3-662-10680-8 ↗
3. 10.1016/S0041-624X(01)00077-410.1016/S0041-624X(01)00077-4 ↗
4. 10.1016/j.polymer.2020.12227810.1016/j.polymer.2020.122278 ↗
5. Fey P, Meiler S, Kreutzbruck M, et al. Non-contact inline monitoring of thermoplastic CFRP tape quality using air-coupled ultrasound. AIP Conf Proc. 2019; 2055(1): 120001.
6. 10.1088/1757-899X/1024/1/01203210.1088/1757-899X/1024/1/012032 ↗
7. 10.1016/j.infrared.2015.02.00610.1016/j.infrared.2015.02.006 ↗
8. 10.1016/j.compositesb.2011.01.01110.1016/j.compositesb.2011.01.011 ↗
9. 10.1117/12.87893210.1117/12.878932 ↗
10. 10.1002/pen.1114110.1002/pen.11141 ↗
11. 10.3390/polym1321368010.3390/polym13213680 ↗
12. 10.1016/0041-624X(91)90174-710.1016/0041-624X(91)90174-7 ↗
13. James RM. Acoustic emission. New York: Gordon and Breach Science Publishers Inc., 1983.
14. 10.1002/amp2.1013810.1002/amp2.10138 ↗
15. Faber J Vistein M Chaloupka A et al. (eds) Sensor-based process monitoring of in-situ polymerization in T-RTM manufacturing with caprolactam. SAMPE Europe Conference 2021.
16. 10.1016/j.yofte.2006.12.00310.1016/j.yofte.2006.12.003 ↗
17. Rotea F. Lamb-wave-dispersion. GitHub 2023, [cited 2023 April 12]. https://github.com/franciscorotea/Lamb-Wave-Dispersion
18. 10.1002/adv.2012410.1002/adv.20124 ↗
19. 10.1007/s00170020015710.1007/s001700200157 ↗
20. Praher B Straka K Usanovic J et al. Ultrasound based monitoring of the injection moulding process - methods applications and limitations. AIP Conf Proc 2014; 1593: 159–162.10.1063/1.4873755 ↗
21. 10.1143/JJAP.42.520510.1143/JJAP.42.5205 ↗
22. 10.1002/app.4858110.1002/app.48581 ↗
23. 10.1177/00405175620320120710.1177/004051756203201207 ↗
24. 10.1016/S0032-3861(03)00544-510.1016/S0032-3861(03)00544-5 ↗
25. 10.1086/31203310.1086/312033 ↗
26. 10.1016/S0025-6196(12)60540-010.1016/S0025-6196(12)60540-0 ↗
27. 10.21553/rev-jec.610.21553/rev-jec.6 ↗
28. Chen VC. The micro-Doppler effect in radar. London: Artech House, 2019.
29. 10.1016/j.ultrasmedbio.2007.10.01710.1016/j.ultrasmedbio.2007.10.017 ↗
30. 10.1016/j.xkme.2022.10048210.1016/j.xkme.2022.100482 ↗
31. 10.1016/j.jsha.2010.02.01110.1016/j.jsha.2010.02.011 ↗
32. 10.1016/S1359-835X(02)00179-310.1016/S1359-835X(02)00179-3 ↗
33. 10.3139/217.265910.3139/217.2659 ↗
34. 10.1177/089270570809160810.1177/0892705708091608 ↗
35. 10.1177/089270570708454110.1177/0892705707084541 ↗
36. Huang M, Zu Y, Wang H, et al. Critical length prediction for fiber breaking in injection molded of long-fiber reinforced thin-walled products. J Thermoplast Compos Mater. 2024; 08927057241296469.