Correlation between the mechanical properties and the fiber breaking morphology of fiber reinforced shotcrete (FRS)
Source abstract
Abstract
Abstract As the primary material for roadway support in underground engineering, shotcrete is of great significance to the underground construction industry. Shotcrete alone is brittle and its internal structure is prone to damage. Thus, reinforcing materials are often added to reduce the brittleness of shotcrete. Most of the studies focused on adding fiber materials to concrete the structural fractures in shotcrete. However, shotcrete internal structure fractures still happen in extreme environments. Therefore, the relationship between the mechanical properties of fiber reinforced shotcrete (FRS) and fiber fracture morphology is studied in this paper. Firstly, two types of fibers are selected, i.e., polypropylene fiber (PPF) and plastic waste fiber (PWF). Then, the mechanical properties of the FRS are tested, and the optimal fiber size of PWF reinforced shotcrete is obtained. Through optimization analysis, the mechanical property superiority of PWF reinforced shotcrete with the optimal fiber size is determined. Next, the fiber fracture in shotcrete is observed by visual and microscopic inspection, and four types of fiber fractures in shotcrete are proposed. Finally, the fiber fracture in various types of shotcrete is statistically analyzed. After correlation equation fitting, it is found that the straight-line, polynomial and exponential fitting results of mechanical properties and fiber fracture number of FRS are the most ideal. The relationship between the mechanical properties of FRS and the fiber fracture morphology is revealed. This study provides a theoretical basis for reducing the fractures of FRS structures in complex construction environments.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Innovative concrete reinforcement materials · Structural Behavior of Reinforced Concrete · Geotechnical Engineering and Underground Structures
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. Dynamic fracture investigations of ultra-high performance concrete by spalling tests10.1016/j.engstruct.2019.109844 ↗
2. Liu G, Cheng W , Zhen LI, et al. Pressure Distribution Calculation Along Pipes Used for Mining Pumping Wet Shotcrete Based on Shear and Slip. Journal of Shandong University of Science and Technology (Natural Science), 2017.
3. The durability properties of polypropylene fiber reinforced fly ash concrete10.1016/j.matdes.2010.07.011 ↗
4. Effect of pumping and spraying processes on the rheological properties and air content of wet-mix shotcrete with various admixtures10.1016/j.conbuildmat.2019.07.104 ↗
5. Mechanism analysis of heat harm in large dip angle coal mining working face
6. Numerical simulation of the mechanism of the hole expansion and anchorage and support control in soft rock roadway
7. Study on the influence of polypropylene fiber aspect ratio on the mechanical properties of concrete
8. Investigating the migration law of aggregates during concrete flowing in pipe10.1016/j.conbuildmat.2020.119065 ↗
9. Effect of fiber on permeability of high-performance concrete for deep tunnels
10. Development of cement dust suppression technology during shotcrete in mine of China-A review10.1016/j.jlp.2018.07.001 ↗
11. The use of prestressed fiberglass to reinforce concrete bending elements10.1051/matecconf/201711700132 ↗
12. Role of porosity on durability of carbon fiber-reinforced polymer-concrete bond10.14359/51716801 ↗
13. Mechanical properties of carbon fiber-reinforced polymer concrete with different polymer-cement ratios10.3390/ma12213530 ↗
14. Tensile behavior of high-strength strain-hardening cement-based composites (HS-SHCC) made with high-performance polyethylene, aramid and PBO fibers10.1016/j.cemconres.2017.04.004 ↗
15. Effects of reinforcing fiber strength on mechanical properties of high-strength concrete10.3390/fib7100093 ↗
16. Fatigue behaviour of strain-hardening cement-based composites (SHCC)10.1016/j.cemconres.2016.11.003 ↗
17. Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination10.1016/j.conbuildmat.2020.118530 ↗
18. An improved wrapping scheme of axially loaded fiber-reinforced polymer confined concrete columns10.1016/j.compstruct.2019.111242 ↗
19. Zhang Zhiguo, Feng Ju, Zhang Mengxi, et al. Damage development analysis of tunnel lining structure under train load based on toughness characteristics of fiber reinforced concrete. J Rock Mech Eng: 1-22 [2020-09-26].
20. Li b. Numerical model on the stress field and multiple cracking behavior of Engineered Cementitious Composites (ECC)10.1016/j.conbuildmat.2016.12.033 ↗
21. Fatigue-induced deterioration of the interface between micro-polyvinyl alcohol (PVA) fiber and cement matrix - ScienceDirect10.1016/j.cemconres.2016.08.021 ↗
22. Fatigue-induced in-situ strength deterioration of micro-polyvinyl alcohol (PVA) fiber in cement matrix
23. A feasibility study of strain hardening fiber reinforced fly ash-based geopolymer composites10.1016/j.conbuildmat.2014.02.005 ↗
24. Ultra-high-ductile behavior of a polyethylene fiber-reinforced alkali-activated slag-based composite10.1016/j.cemconcomp.2016.04.002 ↗
25. Strain hardening ultra-high performance concrete (SHUHPC) incorporating CNF-coated polyethylene fibers10.1016/j.cemconres.2017.04.003 ↗
26. Rheological and tribological behaviors of polypropylene fiber reinforced concrete10.1016/j.conbuildmat.2020.119962 ↗
27. Research on the dynamic mechanical properties and constitutive models of steel fiber reinforced concrete and polypropylene fiber reinforced concrete
28. Flexural fatigue properties of ultra-high performance engineered cementitious composites (UHP-ECC) reinforced by polymer fibers10.3390/polym10080892 ↗
29. Investigating and optimizing the mix proportion of pumping wet-mix shotcrete with polypropylene fiber10.1016/j.conbuildmat.2017.05.169 ↗
30. Rheological properties of fresh concrete and its application on shotcrete10.1016/j.conbuildmat.2020.118180 ↗
31. Post-racking behavior of polypropylene fiber reinforced concrete under bending and uniaxial tensile tests10.1002/suco.201800224 ↗
32. Analysis of dynamic mechanical properties of sprayed fiber-reinforced concrete based on the energy conversion principle10.1016/j.conbuildmat.2020.119167 ↗
33. Destructive and non-destructive experimental investigation of polypropylene fibre reinforced concrete subjected to high temperature10.1016/j.jobe.2019.100906 ↗
34. Industrial standard of the people's Republic of China. (2016). ‘‘Technical code for application of shotcrete.” JGJ / T372-2016, Beijing, China.
35. Bond stress model for fiber reinforced concrete based on bond stress-slip relationship
36. Bond-slip parameter estimation in fiber reinforced concrete at failure using inverse stochastic model10.1016/j.engfailanal.2019.05.019 ↗