Geometric optimization of the crashworthiness performance of 3D-printed PLA-GF tubes with square-to-circular transitions via squircle geometry
Source abstract
Abstract
This study explores the crashworthiness performance of 3D-printed tubes composed of polylactic acid reinforced with glass fiber (PLA-GF), with particular emphasis on the geometric transition from square to circular cross-sections through the use of arc fillets. Tubes with profiles ranging from sharp-cornered squares to fully circular shapes, including intermediate transitional designs, were subjected to quasi-static axial compression testing to evaluate their structural performance. During testing, the load-displacement responses were systematically recorded, and the corresponding failure modes were carefully examined. The crashworthiness analysis focused on evaluating key indicators, including initial peak force ( {F}ip) , total absorbed energy ( {E}T ), average force ( {F}avg ), crash force efficiency (CFE), and specific energy absorption (SEA). Additionally, to identify the most effective geometry, a multi-attribute decision-making framework based on the Complex Proportional Assessment (COPRAS) method was employed. The results revealed that the circular configuration achieved substantial enhancements compared with the square tube, including a 37% increase in {F}avg , a 41% increase in {E}T , a 33% improvement in CFE, and a 70% increase in SEA. Additionally, the SR25 structure exhibited notable improvements over the square tube, particularly in SEA (+40%) and CFE (+24%), highlighting the benefits of intermediate geometric transitions. The COPRAS evaluation further identified the circular tube as the most favorable configuration, attributed to its well-balanced across all evaluated indicators. This work provides clear experimental evidence that controlled geometric transitions between square and circular profiles can significantly affect the crashworthiness of 3D-printed PLA-GF structures.
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Additive Manufacturing and 3D Printing Technologies · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
Affiliations
Zagazig University
Southern Methodist University
King Khalid University
MATCO Chemicals SAE
Funding
Deanship of Scientific Research, King Khalid University
References (85)
Show source-provided references
1. Isaac CW, Ezekwem C. A review of the crashworthiness performance of energy absorbing composite structure within the context of materials. Manufacturing and Maintenance for Sustainability Composite Structures 2021; 257: 113081.
2. 10.1016/j.compositesb.2024.11174210.1016/j.compositesb.2024.111742 ↗
3. 10.1016/j.tra.2020.03.02610.1016/j.tra.2020.03.026 ↗
4. Abraham KS, Rabin RL. Automated vehicles and manufacturer responsibility for accidents. Virginia Law Review 2019; 105(1): 127–171.
5. 10.1007/978-3-030-23176-7_30-110.1007/978-3-030-23176-7_30-1 ↗
6. 10.1016/j.cjtee.2015.11.01610.1016/j.cjtee.2015.11.016 ↗
7. 10.1016/j.tws.2014.03.01210.1016/j.tws.2014.03.012 ↗
8. 10.1016/j.compositesb.2025.11290210.1016/j.compositesb.2025.112902 ↗
9. 10.1016/j.tws.2021.10756510.1016/j.tws.2021.107565 ↗
10. 10.1007/s12221-023-00447-710.1007/s12221-023-00447-7 ↗
11. 10.1533/cras.2001.016910.1533/cras.2001.0169 ↗
12. 10.1007/s00521-022-07215-310.1007/s00521-022-07215-3 ↗
13. 10.1002/pc.2700410.1002/pc.27004 ↗
14. 10.1590/1679-7825386610.1590/1679-78253866 ↗
15. 10.1177/0021998323115950810.1177/00219983231159508 ↗
16. 10.1016/j.engappai.2024.10963410.1016/j.engappai.2024.109634 ↗
17. 10.1080/13588265.2025.249297510.1080/13588265.2025.2492975 ↗
18. 10.1016/j.tws.2010.07.00310.1016/j.tws.2010.07.003 ↗
19. Chen D-H, Masuda K. Crushing behavior of thin walled hexagonal tubes with partition plates. Int Sch Res Not 2011; 2011(1): 1–8.
20. Xie Z, Zhao Z, Zhou X, et al. Fillet effect on the bending crashworthiness of thin-walled square tubes. J Theor Appl Mech 2022; 60(1): 103–111.
21. 10.1007/s12206-013-1172-x10.1007/s12206-013-1172-x ↗
22. Istiyanto J, Purnama H, Triwardono J, et al. The effect of corner radius of square thin-walled structures on crashworthiness indicators Majalah Ilmiah Pengkajian Industri. J Ind Res Innov 2022; 16(2): 81–86.
23. 10.1002/pc.2971410.1002/pc.29714 ↗
24. 10.1002/pc.2763010.1002/pc.27630 ↗
25. 10.1038/s41598-022-25533-310.1038/s41598-022-25533-3 ↗
26. 10.1177/0021998323115501310.1177/00219983231155013 ↗
27. 10.1007/s12221-023-00281-x10.1007/s12221-023-00281-x ↗
28. 10.1002/adfm.20241988210.1002/adfm.202419882 ↗
29. 10.3390/polym1403056610.3390/polym14030566 ↗
30. 10.1038/s41598-022-25679-010.1038/s41598-022-25679-0 ↗
31. 10.1177/0892705722114782610.1177/08927057221147826 ↗
32. 10.1007/s10853-019-03990-y10.1007/s10853-019-03990-y ↗
33. 10.1016/j.mser.2025.10093610.1016/j.mser.2025.100936 ↗
34. Fernandes CP. Use of recycled poly lactic acid (PLA) polymer in 3D printing: A Review. Int Res J Eng Technol 2019; 123(104.34): 98.
35. 10.1016/j.susmat.2020.e0019610.1016/j.susmat.2020.e00196 ↗
36. 10.1016/j.ijfatigue.2025.10932710.1016/j.ijfatigue.2025.109327 ↗
37. 10.1177/089270571560468110.1177/0892705715604681 ↗
38. 10.1021/acs.chemrev.7b0007410.1021/acs.chemrev.7b00074 ↗
39. 10.1007/s11831-024-10220-510.1007/s11831-024-10220-5 ↗
40. Alagesan PK, Krishnan G, Sahu SK, et al. Crashworthiness performance of 3D printed thermoplastic polymer composite hexagonal multi-cellular tubes: a biomimetic approach for enhanced energy absorption. J Thermoplast Compos Mater 2025: 08927057251368873.
41. 10.3390/app1513708010.3390/app15137080 ↗
42. 10.1002/pat.7000210.1002/pat.70002 ↗
43. Awd Allah MM, Abd El-Halim MF, Abd El-baky MA. Experimental crashworthiness evaluation of seahorse-inspired PETG-CF square tubes under axial compression loading. J Thermoplast Compos Mater 2025: 08927057251384971.
44. 10.1016/j.compstruct.2005.04.00610.1016/j.compstruct.2005.04.006 ↗
45. 10.1533/ijcr.2003.022310.1533/ijcr.2003.0223 ↗
46. 10.1016/j.polymer.2019.12180310.1016/j.polymer.2019.121803 ↗
47. 10.3390/polym1422498810.3390/polym14224988 ↗
48. 10.1016/j.biortech.2010.05.09210.1016/j.biortech.2010.05.092 ↗
49. Sharma A, Kumar R, Sharma L. Investigations of tensile behaviour of 3D-Printed PLA-GF-PLA sandwich composite structures. In: International Conference on Materials for Energy Storage and Conservation. Springer, 2022.
50. 10.1088/2631-6331/ad2c0f10.1088/2631-6331/ad2c0f ↗
51. 10.3390/polym1515316410.3390/polym15153164 ↗
52. 10.1016/j.ijbiomac.2019.07.07110.1016/j.ijbiomac.2019.07.071 ↗
53. 10.3390/polym1702019110.3390/polym17020191 ↗
54. 10.1016/j.addr.2016.04.00310.1016/j.addr.2016.04.003 ↗
55. 10.1002/biot.20100013510.1002/biot.201000135 ↗
56. 10.1007/s12221-024-00630-410.1007/s12221-024-00630-4 ↗
57. 10.1515/nanoph-2021-064410.1515/nanoph-2021-0644 ↗
58. 10.1002/adem.20170054910.1002/adem.201700549 ↗
59. 10.3390/polym1612169810.3390/polym16121698 ↗
60. 10.1016/j.matdes.2019.10759710.1016/j.matdes.2019.107597 ↗
61. Deleo FR, Feraboli P. Crashworthiness energy absorption of carbon fiber composites: experiment and simulation. University of Washington, 2011.
62. Browne A, Johnson N, Botkin M. Dynamic crush response of RTM crash boxes. In: ASC 24th technical conference. Memphis: TN, 2008.
63. 10.1080/13588265.2021.192686110.1080/13588265.2021.1926861 ↗
64. 10.1007/s10965-023-03852-x10.1007/s10965-023-03852-x ↗
65. 10.3390/aerospace1202012210.3390/aerospace12020122 ↗
66. 10.1007/s12221-025-01054-410.1007/s12221-025-01054-4 ↗
67. 10.1177/0021998323120497610.1177/00219983231204976 ↗
68. 10.1002/pc.2706010.1002/pc.27060 ↗
69. 10.1016/j.matdes.2017.09.04010.1016/j.matdes.2017.09.040 ↗
70. 10.1016/j.tws.2020.10738010.1016/j.tws.2020.107380 ↗
71. 10.1016/j.compositesb.2024.11174210.1016/j.compositesb.2024.111742 ↗
72. Guler MA, Cerit ME, Bayram B, et al. The effect of geometrical parameters on the energy absorption characteristics of thin-walled structures under axial impact loading. Journal of Crashworthiness 2010; 15(4): 377–390.
73. 10.1002/pc.2757210.1002/pc.27572 ↗
74. 10.1002/pc.2770210.1002/pc.27702 ↗
75. 10.1177/0021998323119426010.1177/00219983231194260 ↗
76. 10.1016/j.tws.2007.07.01810.1016/j.tws.2007.07.018 ↗
77. 10.1016/0734-743X(84)90005-810.1016/0734-743X(84)90005-8 ↗
78. 10.1080/1358826090279295410.1080/13588260902792954 ↗
79. Vishwanath N, Saravanakumar AK, Dwivedi K, et al. (2021) A 3D numerical investigation into the effect of rounded corner radii on the wind loading of a square cylinder subjected to supercritical flow. arXiv preprint arXiv:2112.00164.
80. 10.1016/S0263-8231(03)00046-610.1016/S0263-8231(03)00046-6 ↗
81. 10.1016/S0263-8231(00)00048-310.1016/S0263-8231(00)00048-3 ↗
82. 10.1016/S0734-743X(99)00170-010.1016/S0734-743X(99)00170-0 ↗
83. 10.1016/S0263-8223(03)00183-110.1016/S0263-8223(03)00183-1 ↗
84. 10.1080/1358826070144118310.1080/13588260701441183 ↗
85. 10.1016/j.polymertesting.2009.11.00510.1016/j.polymertesting.2009.11.005 ↗