Mechanical characterization of hybrid lattice-to-steel joint with pyramidal CFRP truss for marine application
Source abstract
Abstract
Abstract As a novel type of composite structure in recent years, lattice structure with carbon fiber pyramidal truss core being applied to vessel superstructure because of its high stiffness ratio and strength ratio, structure design is the key to joint between superstructure and main hull. To investigate the mechanical property of hybrid joint and to solve the problem of engineering application, two kinds of specimens of hybrid joints are designed and their compressive and flexural properties are tested through experiments. Experimental result shows that lattice structure is weakest when joint carries in-plane compressive load and debonding induced by core macro-shear and facesheet wrinkling can result in buckling. When load alters to out-of-plane normal force, facesheet delamination becomes main failure mode, occurring where stiffness mutation of joint structure turns up, and bearing reaction can bring about resin base of lattice core fracture, further leading to debonding.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Cellular and Composite Structures · Structural Analysis and Optimization · Mechanical Behavior of Composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. Review of advanced composite structures for naval ships and submarines10.1016/S0263-8223(00)00175-6 ↗
2. Hiding technology of vessel
3. Integrity of hybrid steel-to-composite joints for marine application
4. Next-generation power and energy: maybe not so next generation10.1111/j.1559-3584.2010.00280.x ↗
5. Fabrication and crushing behavior of low density carbon fiber composite pyramidal truss structures10.1016/j.compstruct.2010.03.010 ↗
6. Mechanical behavior of carbon fiber reinforced polymer composite sandwich panels with 2-D lattice truss cores10.1016/j.matdes.2013.10.025 ↗
7. Mechanical behaviour of CFRP sandwich structures with tetrahedral lattice truss cores10.1016/j.compositesb.2011.11.017 ↗
8. Mechanical behavior and failure of composite pyramidal truss core sandwich columns10.1016/j.compositesb.2010.12.021 ↗
9. Torsion of carbon fiber composite pyramidal core sandwich plates10.1016/j.compstruct.2011.03.024 ↗
10. Response of sandwich structures with pyramidal truss cores under the compression and impact loading10.1016/j.compstruct.2013.01.012 ↗
11. Experimental investigation of 3D sandwich structure with core reinforced by composite columns10.1016/j.matdes.2009.06.039 ↗
12. Compressive efficiency of stretch–stretch-hybrid hierarchical composite lattice cores10.1016/j.matdes.2013.11.012 ↗
13. Stretch–bend-hybrid hierarchical composite pyramidal lattice cores10.1016/j.compstruct.2012.11.004 ↗
14. Pyramidal lattice sandwich structures with hollow composite trusses10.1016/j.compstruct.2011.06.025 ↗
15. Hybrid truss concepts for carbon fiber composite pyramidal lattice structures10.1016/j.compositesb.2012.01.033 ↗
16. Boyd SW. Strength and durability of steel to composite joints for marine application. Ph.D. Thesis. University of Southampton.
17. Optimisation of steel–composite connections for structural marine applications10.1016/j.compositesb.2007.08.001 ↗
18. Characterisation of a glass-fiber reinforced vinylester to steel joint for use between a naval GRP superstructure and a steel hull10.1016/S0263-8223(02)00063-6 ↗
19. Test of a redesigned glass-fiber reinforced vinyl ester to steel joint for use between a naval GRP superstructure and a steel hull10.1016/S0263-8223(03)00020-5 ↗
20. Qualification of adhesives for marine composite-to-steel applications10.1016/j.ijadhadh.2009.08.004 ↗
21. Analysis of a hybrid composite/metal bolted connection subjected to flexural loading10.1016/j.compstruct.2006.09.009 ↗
22. Experimental characterization of hybrid composite-to-metal bolted joints under flexural loading10.1016/j.compositesb.2006.03.013 ↗
23. Pin pull-out behaviour for hybrid metal-composite joints with integrated reinforcements10.1016/j.compstruct.2016.07.047 ↗
24. Influence of pinning on static strength of co-cured metal-gfrp hybrid single lap joints10.1016/j.compositesa.2016.01.011 ↗
25. ASTM C364/C364M-07. Standard test method for edgewise compressive strength of sandwich constructions.
26. ASTM C393-00. Standard test method for flexural properties of sandwich constructions.
27. Mechanical behaviors of carbon fiber composite sandwich columns with three dimensional honeycomb cores under in-plane compression10.1016/j.compositesb.2013.12.049 ↗